Aldehydes chiral ylides

In reagent-controlled epoxidation the asymmetric induction has its origin in a chiral ylide. The reaction of an achiral aldehyde or ketone with a chiral ylide gives optically active compounds. 

Transfer of chirality in epoxidation of aldehyde with ylide 2... 

The adjacent iodine and lactone groupings in 16 constitute the structural prerequisite, or retron, for the iodolactonization transform.15 It was anticipated that the action of iodine on unsaturated carboxylic acid 17 would induce iodolactonization16 to give iodo-lactone 16. The cis C20-C21 double bond in 17 provides a convenient opportunity for molecular simplification. In the synthetic direction, a Wittig reaction17 between the nonstabilized phosphorous ylide derived from 19 and aldehyde 18 could result in the formation of cis alkene 17. Enantiomerically pure (/ )-citronellic acid (20) and (+)-/ -hydroxyisobutyric acid (11) are readily available sources of chirality that could be converted in a straightforward manner into optically active building blocks 18 and 19, respectively. 

The sulfur ylide-mediated epoxidation of aldehydes has been thoroughly investigated [70, 71]. The chiral sulfur ylides reported by Aggarwal have been most broadly applicable, and a catalytic, asymmetric process yielding aromatic transepoxides has been developed [72]. In this process, the sulfur ylides are produced in situ from diazo compounds, generated in turn from tosylhydrazone salts (Scheme 9.15) [73],... 

The aldehyde structures and the tosylhydrazone salts were varied in an extensive study of scope and limitations, with use of both achiral and chiral sulfur ylides [73]. Aromatic aldehydes were excellent substrates in the reaction with benzaldehyde-derived ylides, whereas aliphatic aldehydes gave moderate yields and transxis ratios. 

When ot, 3-unsaturated aldehydes were employed, vinylepoxides were obtained with excellent transxis ratios but in poor yields. When benzaldehyde was treated with a, 3-unsaturated tosylhydrazone salts, the yields of vinylepoxides were improved but the transxis ratios dropped. When chiral sulfides were utilized, the ees were high with a, 3-unsaturated aldehydes, whereas unsaturated, chiral sulfur ylides gave moderate ees, poor yields, and modest transxis ratios. 

Metzner and co-workers reported a one-pot epoxidation reaction in which a chiral sulfide, an allyl halide, and an aromatic aldehyde were allowed to react to give a trons-vinylepoxide (Scheme 9.16c) [77]. This is an efficient approach, as the sulfonium salt is formed in situ and deprotonated to afford the corresponding ylide, and then reacts with the aldehyde. The sulfide was still required in stoichiometric amounts, however, as the catalytic process was too slow for synthetic purposes. The yields were good and the transxis ratios were high when Ri H, but the enantioselectivities were lower than with the sulfur ylides discussed above. 

Sulfur ylides are a classic reagent for the conversion of carbonyl compounds to epoxides. Chiral camphor-derived sulfur ylides have been used in the enantioselective synthesis of epoxy-amides <06JA2105>. Reaction of sulfonium salt 12 with an aldehyde and base provides the epoxide 13 in generally excellent yields. While the yield of the reaction was quite good across a variety of R groups, the enantioselectivity was variable. For example benzaldehyde provides 13 (R = Ph) in 97% ee while isobutyraldehyde provides 13 (R = i-Pr) with only 10% ee. These epoxy amides could be converted to a number of epoxide-opened... 

An alternative to the synthesis of epoxides is the reaction of sulfur ylide with aldehydes and ketones.107 This is a carbon-carbon bond formation reaction and may offer a method complementary to the oxidative processes described thus far. The formation of sulfur ylide involves a chiral sulfide and a carbene or carbenoid, and the general reaction procedure for epoxidation of aldehydes may involve the application of a sulfide, an aldehyde, or a carbene precursor as well as a copper salt. This reaction may also be considered as a thiol acetal-mediated carbene addition to carbonyl groups in the aldehyde. 

In the design of chiral sulfides for sulfur ylide-mediated asymmetric epoxidation of aldehydes, two factors are important. First, a single sulfur ylide should be produced. Otherwise, the diastereomeric sulfur ylides may react with aldehydes in different ways and thus cause a drop in stereoselectivity. This may be achieved by choosing a rigid cyclic structure to make one of the lone pairs more accessible than the other. Second, the structure should be amenable to structural modification in order to study the electronic and steric effects of the sulfur on the enantioselectivity of the epoxidation reaction. 

A variety of optically active 4,4-disubstituted allenecarboxylates 245 were provided by HWE reaction of intermediate disubstituted ketene acetates 244 with homochiral HWE reagents 246 developed by Tanaka and co-workers (Scheme 4.63) [99]. a,a-Di-substituted phenyl or 2,6-di-tert-butyl-4-methylphenyl (BHT) acetates 243 were used for the formation of 245 [100]. Addition of ZnCl2 to a solution of the lithiated phos-phonate may cause binding of the rigidly chelated phosphonate anion by Zn2+, where the axially chiral binaphthyl group dictates the orientation of the approach to the electrophile from the less hindered si phase of the reagent. Similarly, the aryl phosphorus methylphosphonium salt 248 was converted to a titanium ylide, which was condensed with aromatic aldehydes to provide allenes 249 with poor ee (Scheme 4.64) [101]. 

Perlmutter used an oxymercuration/demercuration of a y-hydroxy alkene as the key transformation in an enantioselective synthesis of the C(8 ) epimeric smaller fragment of lb (and many more pamamycin homologs cf. Fig. 1) [36]. Preparation of substrate 164 for the crucial cyclization event commenced with silylation and reduction of hydroxy ester 158 (85-89% ee) [37] to give aldehyde 159, which was converted to alkenal 162 by (Z)-selective olefination with ylide 160 (dr=89 l 1) and another diisobutylaluminum hydride reduction (Scheme 22). An Oppolzer aldol reaction with boron enolate 163 then provided 164 as the major product. Upon successive treatment of 164 with mercury(II) acetate and sodium chloride, organomercurial compound 165 and a second minor diastereomer (dr=6 l) were formed, which could be easily separated. Reductive demercuration, hydrolytic cleavage of the chiral auxiliary, methyl ester formation, and desilylation eventually led to 166, the C(8 ) epimer of the... 

The 1,3-dipolar cycloaddition of azomethine yUdes with olefins gives rise to pyrrolidines which represent structural elements of organocatalysts, natural products, and drug candidates. Asymmetric metal-catalyzed variants attracted considerable attention over the last few years [64], Recently, Vicario et al. reported an organo-catalytic [3 -i- 2] cycloaddition of azomethine ylides and a,p-unsaturated aldehydes mediated by a chiral secondary amine [65]. 

Numerous studies have been directed toward expanding the chemistry of the donor/ac-ceptor-substituted carbenoids to reactions that form new carbon-heteroatom bonds. It is well established that traditional carbenoids will react with heteroatoms to form ylide intermediates [5]. Similar reactions are possible in the rhodium-catalyzed reactions of methyl phenyldiazoacetate (Scheme 14.20). Several examples of O-H insertions to form ethers 158 [109, 110] and S-H insertions to form thioethers 159 [111] have been reported, while reactions with aldehydes and imines lead to the stereoselective formation of epoxides 160 [112, 113] and aziridines 161 [113]. The use of chiral catalysts and pantolactone as a chiral auxiliary has been explored in many of these reactions but overall the results have been rather moderate. Presumably after ylide formation, the rhodium complex disengages before product formation, causing degradation of any initial asymmetric induction. 

The reaction was further developed to form a wide range of p-lactam-based products (52). Treatment of the racemic ylide processor 186 with suitable sulfur-based thiocarboxylate or thiocarbonate dipolarophiles gave rise to the expected racemic penams 189 and 190 and penems as single regioisomers (Scheme 3.54). Once again, the use of the chiral dipolarophile 186 furnished the cycloaddition product 191 with complete enantiomeric integrity. Similarly, the use of aldehydes... 

Enders et al. (53) reported the use of chiral l,3-dioxan-5-ylamines in condensation reactions with aromatic aldehydes to form ylides in situ, which underwent thermal cycloaddition reactions with excellent yields. Treatment of 193 with benzaldehyde or p-fluorobenzaldehyde in the presence of excess dimethyl fumarate or fumaronitrile gave rise to the expected adducts in 85% yield with a >96% diastereomeric excess. For nitriles (R = CN), the endo/exo selectivity was higher at 70 30 than for the esters (R = C02Me) at 55 45 (Scheme 3.56). 

Reactions of the same carbonyl ylide intermediate with aldehydes are even more fruitful. The Rh2(OAc)2 catalyzed reaction proceeds at room temperature in the presence of 2 mol% of the catalyst, but the diastereoselectivity is disappointingly low (endo/exo = 49 51, Scheme 11.56). However, when 10 mol% of the cocatalyst Yb(OTf)3 is added, the reaction becomes highly exo-selective (endo/ exo = 3 97) (198). Suga has extended this Lewis acid catalyzed carbonyl ylide cycloaddition reaction to catalyzed asymmetric versions. The chiral cocatalyst employed is ytterbium(III) tris(5)-1,1 -binaphthyl-2,2 -diyl phosphonate, Yb[(S) BNP]3 (10 mol%). In the reaction of methyl o-(diazoacetyl)benzoate with benzyloxyacetaldehyde in the presence of Rh2(OAc)2 (2 mol%) at room temperature with the chiral Yb catalyst, the diastereoselectivity is low (endo/exo = 57 43) and the enantiopurity of the endo-cycloadduct is 52% ee. 

Other chiral azomethine ylide precursors such as 2-(ferf-butyl)-3-imidazolidin-4-one have been tested as chiral controllers in 1,3-dipolar cycloadditions (89). 2-(ferf-Butyl)-3-imidazolidin-4-one reacted with various aldehydes to produce azomethine ylides, which then were subjected to reaction with a series of different electron-deficient alkenes to give the 1,3-dipolar cycloaddition products in moderate diastereoselectivity of up to 60% de. 

For intramolecular 1,3-dipolar cycloadditions, the application of nitrones and nitrile oxides is by far most common. However, in increasing frequency, cases intramolecular reactions of azomethine ylides (76,77,242-246) and azides (247-259) are being reported. The previously described intermolecular approach developed by Harwood and co-workers (76,77) has been extended to also include intramolecular reactions. The reaction of the chiral template 147 with the alkenyl aldehyde 148 led to the formation of the azomethine ylide 149, which underwent an intramolecular 1,3-dipolar cycloaddition to furnish 150 (Scheme 12.49). The reaction was found to proceed with high diastereoselectivity, as only one diaster-eomer of 150 was formed. By a reduction of 150, the proline derivative 151 was obtained. 

The carbon fragment used in this approach can also be provided by sulfur yUdes. In this arena, Metzner and co-workers <99JCS(P1)731> developed a novel asymmetric variant employing (+)-(2/J,5/J)-2,5-dimethylthiolane (53) as the chiral auxiliary to prepare rrons-(S,S)-stilbene oxide (56). Chiral epoxides have also been prepared from aldehydes using sulfur ylides derived from the products of Baker s yeast reductions <99SL1328>. 

Chiral alkenyl and cycloalkenyl oxiranes are valuable intermediates in organic synthesis [38]. Their asymmetric synthesis has been accomplished by several methods, including the epoxidation of allyl alcohols in combination with an oxidation and olefination [39a], the epoxidation of dienes [39b,c], the chloroallylation of aldehydes in combination with a 1,2-elimination [39f-h], and the reaction of S-ylides with aldehydes [39i]. Although these methods are efficient for the synthesis of alkenyl oxiranes, they are not well suited for cycloalkenyl oxiranes of the 56 type (Scheme 1.3.21). Therefore we had developed an interest in the asymmetric synthesis of the cycloalkenyl oxiranes 56 from the sulfonimidoyl-substituted homoallyl alcohols 7. It was speculated that the allylic sulfoximine group of 7 could be stereoselectively replaced by a Cl atom with formation of corresponding chlorohydrins 55 which upon base treatment should give the cycloalkenyl oxiranes 56. The feasibility of a Cl substitution of the sulfoximine group had been shown previously in the case of S-alkyl sulfoximines [40]. 

The enantioselective synthesis of a somewhat more complex renin inhibitor starts with the reduction of the ester group in the chiral amino-ester (19-1) by means of diisobutyl aluminum hydride in the cold. The aldehyde product (19-2) is then reacted with prior isolation with the ylide from phosphonium salt (19-3) and a strong base... 

A structurally unusual 3-blocker that uses a second molecule of itself as the substituent on nitrogen is included here in spite of the ubiquity of this class of compounds. Exhaustive hydrogenation of the chromone (13-1) leads to a reduction of both the double bond and the carbonyl group, as in the case of (11-2). The car-boxyhc acid is then reduced to an aldehyde (13-2) by means of diisobutylaluminum hydride. Reaction of that intermediate with the ylide from trimethylsulfonium iodide gives the oxirane (13-3) via the addition-displacement process discussed earlier (see Chapters 3 and 8). Treatment of an excess of that epoxide with benzylamine leads to the addition of two equivalents of that compound with each basic nitrogen (13-4). The product is then debenzylated by catalytic reduction over palladium to afford nebivolol (13-5) [16]. The presence of four chiral centers in the product predicts the existence of 16 chiral pairs. 

Chiral cyclopropanes. Carrie el al.b l have developed a highly enantioselective synthesis of cyclopropanes from the aldehyde 2, in which the butadiene group is protected as the iron tricarhonyl complex. The complex (2) is resolved by the method of Kelly and Van Rheenan (5, 289-290), and the two optical isomers arc then converted separately into a cyclopropanealdehyde (5a and 5b) as formulated. A sulfur ylide such as (CH3)2S=CHCOOCH3 can be used in place of diazomethane for cyclopropanation. Optical yields are > 90%,... 

Some organic reactions can be accomplished by using two-layer systems in which phase-transfer catalysts play an important role (34). The phase-transfer reaction proceeds via ion pairs, and asymmetric induction is expected to emerge when chiral quaternary ammonium salts are used. The ion-pair interaction, however, is usually not strong enough to control the absolute stereochemistry of the reaction (35). Numerous trials have resulted in low or only moderate stereoselectivity, probably because of the loose orientation of the ion-paired intermediates or transition states. These reactions include, but are not limited to, carbene addition to alkenes, reaction of sulfur ylides and aldehydes, nucleophilic substitution of secondary alkyl halides, Darzens reaction, chlorination... 

Rhodium(II) acetate catalyzes C—H insertion, olefin addition, heteroatom-H insertion, and ylide formation of a-diazocarbonyls via a rhodium carbenoid species (144—147). Intramolecular cyclopentane formation via C—H insertion occurs with retention of stereochemistry (143). Chiral rhodium (TT) carboxamides catalyze enantioselective cyclopropanation and intramolecular C—N insertions of CC-diazoketones (148). Other reactions catalyzed by rhodium complexes include double-bond migration (140), hydrogenation of aromatic aldehydes and ketones to hydrocarbons (150), homologation of esters (151), carbonylation of formaldehyde (152) and amines (140), reductive carbonylation of dimethyl ether or methyl acetate to 1,1-diacetoxy ethane (153), decarbonylation of aldehydes (140), water gas shift reaction (69,154), C—C skeletal rearrangements (132,140), oxidation of olefins to ketones (155) and aldehydes (156), and oxidation of substituted anthracenes to anthraquinones (157). Rhodium-catalyzed hydrosilation of olefins, alkynes, carbonyls, alcohols, and imines is facile and may also be accomplished enantioselectively (140). Rhodium complexes are moderately active alkene and alkyne polymerization catalysts (140). In some cases polymer-supported versions of homogeneous rhodium catalysts have improved activity, compared to their homogenous counterparts. This is the case for the conversion of alkenes direcdy to alcohols under oxo conditions by rhodium—amine polymer catalysts... 

---