Acrylonitrile, addition

Treatment of mono- and diamines with acrylonitrile (Iter. 1) yields the nitriles, which are then reduced (Iter. 2), recovering the initial functional groups and thus a repetition of the acrylonitrile addition is possible. 

Use Pharmaceuticals and medicine, cosmetics (eye shadow, lipstick), component of low-melting (fusible) alloys, catalyst in making acrylonitrile, additive to improve machinability of steels and other metals, coating selenium, thermoelectric materials, permanent magnets, semiconductors. 

Both diethyl trimethylsilyl phosphite and tris(trimethylsilyl) phosphite participate in conjugate addition reactions with a,p-unsaturated nitriles.With acrylonitrile, addition occurs readily at 120°C at the P position, with transfer of the silyl ester linkage to the a position of the nitrile, to give 2-silylated 2-cyanoethylphosphonates in 46-72% yields. Protodesilylation with a proton donor leads to the simple 2-cyanoethylphosphonates (Scheme 6.28). ... 

Bismuth Bismuth-209 Bismuth, elemental EINECS 231-177-4 HSDB 2078. Used in the synthesis of pharmaceuticals and medicinals, cosmetics, alloys, catalyst in making acrylonitrile, additive, coating selenium. Metal mp = 271° bp = 1420°. Asarco Atomergic Chemetals Frys Metals Ltd Noah Chem... 

Some recent patents describe improvements to existing processes. Addition of dialkylaluminium hydrides to conventional hydroformylation catalysts gave an increased yield of linear products from internal alkenes, Co/porphyrin catalysts were shown to hydroformylate acrylonitrile, addition of R2P(0)H gave higher conversions in undecene hydroformy-lation, acetal yield was improved by addition of quaternary ammonium salts and the stability of phosphine-modified Co catalysts was improved by addition of arylalkylsulphonate salts. ... 

The addition of active methylene compounds (ethyl malonate, ethyl aoeto-acetate, ethyl plienylacetate, nltromethane, acrylonitrile, etc.) to the aP-double bond of a conjugated unsaturated ketone, ester or nitrile In the presence of a basic catalyst (sodium ethoxide, piperidine, diethylamiiie, etc.) is known as the Michael reaction or Michael addition. The reaction may be illustrated by the addition of ethyl malonate to ethyl fumarate in the presence of sodium ethoxide hydrolysis and decarboxylation of the addendum (ethyl propane-1 1 2 3-tetracarboxylate) yields trlcarballylic acid ... 

The acylpalladium complex formed from acyl halides undergoes intramolecular alkene insertion. 2,5-Hexadienoyl chloride (894) is converted into phenol in its attempted Rosenmund reduction[759]. The reaction is explained by the oxidative addition, intramolecular alkene insertion to generate 895, and / -elimination. Chloroformate will be a useful compound for the preparation of a, /3-unsaturated esters if its oxidative addition and alkene insertion are possible. An intramolecular version is known, namely homoallylic chloroformates are converted into a-methylene-7-butyrolactones in moderate yields[760]. As another example, the homoallylic chloroformamide 896 is converted into the q-methylene- -butyrolactams 897 and 898[761]. An intermolecular version of alkene insertion into acyl chlorides is known only with bridgehead acid chlorides. Adamantanecarbonyl chloride (899) reacts with acrylonitrile to give the unsaturated ketone 900[762],... 

Indoles can also be alkylated by conjugate addition under alkaline conditions. Under acidic conditions, alkylation normally occurs at C3 (see Section 11.1). Table 9.1 includes examples of alkylation by ethyl acrylate, acrylonitrile, acrylamide and 4-vinylpyridine. 

Addition of HCN to unsaturated compounds is often the easiest and most economical method of making organonitnles. An early synthesis of acrylonitrile involved the addition of HCN to acetylene. The addition of HCN to aldehydes and ketones is readily accompHshed with simple base catalysis, as is the addition of HCN to activated olefins (Michael addition). However, the addition of HCN to unactivated olefins and the regioselective addition to dienes is best accompHshed with a transition-metal catalyst, as illustrated by DuPont s adiponitrile process (6—9). 

The yield of acrylonitrile based on propylene is generally lower than the yield of acryhc acid based on the dkect oxidation of propylene. Hence, for the large volume manufacture of acrylates, the acrylonitrile route is not attractive since additional processing steps are involved and the ultimate yield of acrylate based on propylene is much lower. Hydrolysis of acrylonitrile can be controUed to provide acrylamide rather than acryhc acid, but acryhc acid is a by-product in such a process (80). 

Nitrile mbber finds broad application in industry because of its excellent resistance to oil and chemicals, its good flexibility at low temperatures, high abrasion and heat resistance (up to 120°C), and good mechanical properties. Nitrile mbber consists of butadiene—acrylonitrile copolymers with an acrylonitrile content ranging from 15 to 45% (see Elastomers, SYNTHETIC, NITRILE RUBBER). In addition to the traditional applications of nitrile mbber for hoses, gaskets, seals, and oil well equipment, new applications have emerged with the development of nitrile mbber blends with poly(vinyl chloride) (PVC). These blends combine the chemical resistance and low temperature flexibility characteristics of nitrile mbber with the stability and ozone resistance of PVC. This has greatly expanded the use of nitrile mbber in outdoor applications for hoses, belts, and cable jackets, where ozone resistance is necessary. 

In addition to graft copolymer attached to the mbber particle surface, the formation of styrene—acrylonitrile copolymer occluded within the mbber particle may occur. The mechanism and extent of occluded polymer formation depends on the manufacturing process. The factors affecting occlusion formation in bulk (77) and emulsion processes (78) have been described. The use of block copolymers of styrene and butadiene in bulk systems can control particle size and give rise to unusual particle morphologies (eg, coil, rod, capsule, cellular) (77). 

Acryhc stmctural adhesives have been modified by elastomers in order to obtain a phase-separated, toughened system. A significant contribution in this technology has been made in which acryhc adhesives were modified by the addition of chlorosulfonated polyethylene to obtain a phase-separated stmctural adhesive (11). Such adhesives also contain methyl methacrylate, glacial methacrylic acid, and cross-linkers such as ethylene glycol dimethacrylate [97-90-5]. The polymerization initiation system, which includes cumene hydroperoxide, N,1S7-dimethyl- -toluidine, and saccharin, can be apphed to the adherend surface as a primer, or it can be formulated as the second part of a two-part adhesive. Modification of cyanoacrylates using elastomers has also been attempted copolymers of acrylonitrile, butadiene, and styrene ethylene copolymers with methylacrylate or copolymers of methacrylates with butadiene and styrene have been used. However, because of the extreme reactivity of the monomer, modification of cyanoacrylate adhesives is very difficult and material purity is essential in order to be able to modify the cyanoacrylate without causing premature reaction. 

Homogeneous GopolymeriZation. Nearly all acryhc fibers are made from acrylonitrile copolymers containing one or more additional monomers that modify the properties of the fiber. Thus copolymerization kinetics is a key technical area in the acryhc fiber industry. When carried out in a homogeneous solution, the copolymerization of acrylonitrile foUows the normal kinetic rate laws of copolymerization. Comprehensive treatments of this general subject have been pubhshed (35—39). The more specific subject of acrylonitrile copolymerization has been reviewed (40). The general subject of the reactivity of polymer radicals has been treated in depth (41). 

An example of a commercial semibatch polymerization process is the early Union Carbide process for Dynel, one of the first flame-retardant modacryhc fibers (23,24). Dynel, a staple fiber that was wet spun from acetone, was introduced in 1951. The polymer is made up of 40% acrylonitrile and 60% vinyl chloride. The reactivity ratios for this monomer pair are 3.7 and 0.074 for acrylonitrile and vinyl chloride in solution at 60°C. Thus acrylonitrile is much more reactive than vinyl chloride in this copolymerization. In addition, vinyl chloride is a strong chain-transfer agent. To make the Dynel composition of 60% vinyl chloride, the monomer composition must be maintained at 82% vinyl chloride. Since acrylonitrile is consumed much more rapidly than vinyl chloride, if no control is exercised over the monomer composition, the acrylonitrile content of the monomer decreases to approximately 1% after only 25% conversion. The low acrylonitrile content of the monomer required for this process introduces yet another problem. That is, with an acrylonitrile weight fraction of only 0.18 in the unreacted monomer mixture, the low concentration of acrylonitrile becomes a rate-limiting reaction step. Therefore, the overall rate of chain growth is low and under normal conditions, with chain transfer and radical recombination, the molecular weight of the polymer is very low. 

Another type of polyol often used in the manufacture of flexible polyurethane foams contains a dispersed soHd phase of organic chemical particles (234—236). The continuous phase is one of the polyols described above for either slab or molded foam as required. The dispersed phase reacts in the polyol using an addition reaction with styrene and acrylonitrile monomers in one type or a coupling reaction with an amine such as hydrazine and isocyanate in another. The soHds content ranges from about 21% with either system to nearly 40% in the styrene—acrylonitrile system. The dispersed soHds confer increased load bearing and in the case of flexible molded foams also act as a ceU opener. 

Nitrile Rubber. Vulcanized mbber sheets of NBR and montmorillonite clay intercalated with Hycar ATBN, a butadiene acrylonitrile copolymer have been synthesized (36). These mbber hybrids show enhanced reinforcement (up to four times as large) relative to both carbon black-reinforced and pure NBR. Additionally, these hybrids are more easily processed than carbon black-filled mbbers. 

---