Acrylic polymer concretes application

Polymers. The purpose of adding polymers to the concrete matrix is to improve the characteristics of the fresh concrete (such as workability) and also to enhance the hardened properties such as flexural strength, modulus of elasticity and adhesive performance [8]. The incorporation of polymers into concrete may be in the form of polymer modified concrete (PMC), polymer impregnated concrete (PIC) or as polymer concrete (PC) [9], For this project, the objective was to develop an ultra-lightweight concrete material using Portland cement as the main binder modified with a suitable polymer - thus a PMC application. The polymer modifiers selected for the development of the ultra-lightweight thin filmed material were a commercially available SBR latex as well as a readily available acrylic polymer. 

B) Polymer-cement concrete is a modified concrete in which a part of the cement binder is replaced by organic polymer. It is produced by incorporating a monomer, prepolymer, or dispersed polymer latex into a cement-concrete mixture. The process technology used is similar to that of conventional concrete and has the advantage that it can be cast in place for field applications. Most of the polymer-cement-concrete composites are based on different kinds of lattices obtained especially by emulsion polymerization. The lattices are aqueous emulsions containing polymer particles such as SBR, NBR, PVAc, copolyesters of AA-MAA, and PAA-PMAA-SBR. The compatibility of SBR, PVAc, and acrylic lattices with Portland cement produces particular characteristics that led to wide use of this component as polymer-concrete composites. 

Thermoplastic acrylic polymers are used in the decoration and protection of masonry and concrete, for both interior and exterior applications. 

Uses. The largest use for sodium thiocyanate is as the 50—60 wt % aqueous solution, as a component of the spinning solvent for acrylic fibers (see Fibers, ACRYLIC Acrylonitrile polymers). Other textile applications are as a fiber swelling agent and as a dyeing and printing assist. A newer commercial use for sodium thiocyanate is as an additive to cement in order to impart early strength to concrete (376). 

Acrylic concretes and mortars are used in applications which require fast curing. Acrylic crack-injecting systems are suitable for wet cracks. Products such as adhesives, asphalt modifiers and floor-care polymers find only a small percentage of applications. 

Organic coatings are used to block the penetration of carbon dioxide or chloride ions. They form a continuous polymeric film on the surface of the concrete, of a thickness ranging from 100 to 300 pm. The binder can already be present in the liquid paint as a polymer, or the polymer can be formed due to chemical reactions between monomeric components that are mixed just before application. Modem coating systems are usually built up of several layers applied consecutively. They are compatible with the alkalinity of the concrete and are based on various types of polymers (e. g. acrylate, polyurethane, epoxy), pigments and additives, and are made suitable for application by the addition of solvents or diluents. 

---