Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Acrylic acid Caprolactam

Acetic acid Acrylic acid Adipic acid Benzene Biphenyl Bisphenol-A Caprolactam Chloroacetic acid p-Chloro toluene p-Cresol... [Pg.1995]

Technological barriers exist for the production of, for example, acrylic acid from biomass, while currently higher prices impede the production of N-containing chemicals (acrylonitrile, acrylamide, and e-caprolactam) from proteins. These obstacles will be overcome according to van Haveren et al. in the next 10 to 20 years. [Pg.105]

The influence of parameters such as crosslinking agent aluminium acetylacetonate content, introduction time of monomers, amount of reactor charge, distribution of N-vinyl caprolactam (VC), diverse crosslinkers, viscosity and molar mass of the synthesised pressure-sensitive adhesives (PSA) and solvent balance and transfer agent kind and content on such important parameters of PS A as shrinkage, plasticity, adhesion to steel and deformation are examined. Synthesised pressure-sensitive adhesives based on acrylic polymers and containing 2-ethylhexyl acrylate (2-EHA), methyl acrylate (MA), acrylic acid (AA) and VC are used for production of self-adhesives containing PVC carrier. 4 refs. [Pg.94]

Nonionic, anionic, and cationic VP copolymers are all available commercially to enhance the hydrophilic, hydrophobic, and ionic properties of PVP for specihc applications. Important comonomers include vinyl acetate (VA), acrylic acid (AA), vinyl alcohol, dimethy-laminoethylmethacrylate (DMAEMA), styrene, maleic anhydride, acrylamide, methyl methacrylate, lauryl methacrylate (LM), a-olelins, methacrylamido-propyltrimethyl ammonium chloride (MAPTAC), vinyl caprolactam (VCL), and dimethylaminopropyl-methacrylamide (DMAPMA). [Pg.1711]

Most VP-based copolymers are also characterized by K value. However, the literature on molecular weights of VP copolymers is very sparse. Wu and Senak reported in 1990 (6) the absolute molecular weights of cationic copolymers of quatemized vinyl pyrrolidone and dimethylaminoethyl methacrylate by size exclusion chromatography with low-angle laser light scattering (SEC/LALLS) and SEC with universal calibration (see Table 8). The molecular weights (relative to polyethylene oxide standards) of nonionic copolymers of vinyl pyrrolidone and vinyl acetate, a nonionic terpolymer of vinyl pyrrolidone, dimethylaminoethyl methacrylate, and vinyl caprolactam, and anionic copolymers of vinyl pyrrolidone and acrylic acid were also reported in 1991 (7) by Wu et al. (see Tables 6 and 7). [Pg.313]

Currently, UV-initiated graft polymerization has been widely used for the surface modification of polymer manbranes in attempts to develop composite manbranes with enhanced resistance toward organic fouling and biofouling. As can be seen in Table 3.1, different hydrophilic monomers, such as Af-vinyl-2-pyrrolidone (NVP), A-vinylformamide (NVF), A-vinyl-caprolactam (NVC), 2-hydroxyethyl methacrylate (HEMA), acrylic acid (AA), acrylamide (AAm), 2-acrylamidoglycolic acid (AAG),... [Pg.45]

Acrylic acid-co-ethylene Caprolactam (PA-6) Single r. I had 19 wt% acrylic acid Matzner et al. (1979)... [Pg.1928]

See other pages where Acrylic acid Caprolactam is mentioned: [Pg.430]    [Pg.105]    [Pg.402]    [Pg.403]    [Pg.5]    [Pg.327]    [Pg.311]    [Pg.359]    [Pg.386]    [Pg.386]    [Pg.436]    [Pg.462]    [Pg.471]    [Pg.473]    [Pg.481]    [Pg.82]    [Pg.83]    [Pg.83]    [Pg.143]    [Pg.145]    [Pg.145]    [Pg.145]    [Pg.427]    [Pg.450]    [Pg.451]    [Pg.504]    [Pg.511]    [Pg.531]    [Pg.539]    [Pg.540]    [Pg.550]    [Pg.602]    [Pg.894]    [Pg.716]    [Pg.356]    [Pg.1928]   
See also in sourсe #XX -- [ Pg.395 , Pg.999 , Pg.1031 ]



SEARCH



Caprolactam

Caprolactamate

Caprolactams

© 2024 chempedia.info