Acid-base equilibria carboxylic acids

On excitation the phenolic group becomes more strongly acidic while the carboxylic acid group becomes a stronger base and proton exchange then occurs between the two. In confirmation of this explanation, methyl salicylate was found to behave similarly, but methyl 2-methoxybenzoate, with no transferable proton, showed a normal Stokes shift. Quenching experiments demonstrated that at room temperature the proton transfer reaction reached equilibrium within the lifetime of the excited state. 

The term nucleophilicity refers to the relative rate of reaction of an electron donor with a given electrophile, as distinct from basicity, which refers to its relative affinity for a proton in an acid-base equilibrium. A quantitative relationship between rate and equilibrium constants was discovered by Brpnsted and Pedersen (1) in 1924. These authors found that the rate constants for the catalytic decomposition of nitramide by a family of bases, such as carboxylate ions (GCH2C02 ), could be linearly correlated with the acidities of their conjugate acids, pKHB. This observation led to the discovery of general base catalysis and the first linear free-energy relationship, which later became known as the Brpnsted equation ... 

Strength (to amplify double-layer effects) showed an increase in current as the solution was acidified, and the corresponding analysis also gave pK = 5.6. The results indicated that each of the electrochemical reactions were controlled by a common acid-base equilibrium at an electrode surface functionality. One possibility suggested was a carboxylate with the pK raised by a neighbouring hydrogen-bond acceptor. 

An Amino acid is also amphoteric with the added complication that the neutral molecule is subject to an internal acid-base equilibrium in which the basic amino group attracts and binds the proton from the acidic carboxyl group, forming a zwitter ion. 

Fischer esterification is reversible and the position of equilibrium lies slightly to the side of products when the reactants are simple alcohols and carboxylic acids When the Fis cher esterification is used for preparative purposes the position of equilibrium can be made more favorable by using either the alcohol or the carboxylic acid m excess In the following example m which an excess of the alcohol was employed the yield indicated IS based on the carboxylic acid as the limiting reactant... 

A prototype of such phenomena can be seen in even the simplest carboxylic acid, acetic acid (CH3CHOOH). Acidity is determined by the energy or free energy difference between the dissociated and nondissociated forms, whose energetics usually depend significantly on their conformation, e.g., the syn/anti conformational change of the carboxyl-ate group in the compound substantially affects the acid-base equilibrium. The coupled conformation and solvent effects on acidity is treated in Ref. 20. 

In the discussion of the relative acidity of carboxylic acids in Chapter 1, the thermodynamic acidity, expressed as the acid dissociation constant, was taken as the measure of acidity. It is straightforward to determine dissociation constants of such adds in aqueous solution by measurement of the titration curve with a pH-sensitive electrode (pH meter). Determination of the acidity of carbon acids is more difficult. Because most are very weak acids, very strong bases are required to cause deprotonation. Water and alcohols are far more acidic than most hydrocarbons and are unsuitable solvents for generation of hydrocarbon anions. Any strong base will deprotonate the solvent rather than the hydrocarbon. For synthetic purposes, aprotic solvents such as ether, tetrahydrofuran (THF), and dimethoxyethane (DME) are used, but for equilibrium measurements solvents that promote dissociation of ion pairs and ion clusters are preferred. Weakly acidic solvents such as DMSO and cyclohexylamine are used in the preparation of strongly basic carbanions. The high polarity and cation-solvating ability of DMSO facilitate dissociation... 

Conversion of Amides into Carboxylic Acids Hydrolysis Amides undergo hydrolysis to yield carboxylic acids plus ammonia or an amine on heating in either aqueous acid or aqueous base. The conditions required for amide hydrolysis are more severe than those required for the hydrolysis of add chlorides or esters but the mechanisms are similar. Acidic hydrolysis reaction occurs by nucleophilic addition of water to the protonated amide, followed by transfer of a proton from oxygen to nitrogen to make the nitrogen a better leaving group and subsequent elimination. The steps are reversible, with the equilibrium shifted toward product by protonation of NH3 in the final step. 

One of the most important characteristics of IL is its wide temperature range for the liquid phase with no vapor pressure, so next we tested the lipase-catalyzed reaction under reduced pressure. It is known that usual methyl esters are not suitable for lipase-catalyzed transesterification as acyl donors because reverse reaction with produced methanol takes place. However, we can avoid such difficulty when the reaction is carried out under reduced pressure even if methyl esters are used as the acyl donor, because the produced methanol is removed immediately from the reaction mixture and thus the reaction equilibrium goes through to produce the desired product. To realize this idea, proper choice of the acyl donor ester was very important. The desired reaction was accomplished using methyl phenylth-ioacetate as acyl donor. Various methyl esters can also be used as acyl donor for these reactions methyl nonanoate was also recommended and efficient optical resolution was accomplished. Using our system, we demonstrated the completely recyclable use of lipase. The transesterification took place smoothly under reduced pressure at 10 Torr at 40°C when 0.5 equivalent of methyl phenylthioacetate was used as acyl donor, and we were able to obtain this compound in optically pure form. Five repetitions of this process showed no drop in the reaction rate (Fig. 4). Recently Kato reported nice additional examples of lipase-catalyzed reaction based on the same idea that CAL-B-catalyzed esterification or amidation of carboxylic acid was accomplished under reduced pressure conditions. ... 

Amino acids are characterized by the presence of adjacent carboxylic (-C0 H) and amino (-NH) functional groups. The equilibrium constant for protonation or dissociation of these groups is a function of their position in the amino acid molecule. Therefore, widely differing acid-base properties of amino acids occur, depending upon the number of functional groups and their relative position in the molecule. The dissociation constants for various amino acids used in this investigation are given in Table I. 

The reaction with carboxylic acid and acid anhydride is carried out in the presence of a small amount of concentrated sulphuric acid. The reaction is reversible, and therefore, water is removed as soon as it is formed. The reaction with acid chloride is carried out in the presence of a base (pyridine) so as to neutralise HCl which is formed during the reaction. It shifts the equilibrium to the right hand side. The introduction of acetyl (CH3CO) group in alcohols or phenols is known as acetylation. Acetylation of salicylic acid produces aspirin. 

As a generalization, acid-base interactions result in the formation of the weaker acid and the weaker base, a consequence of the most stable species being favoured at equilibrium. Thus, a carboxylic acid such as acetic acid will react with aqueous sodium hydroxide to form sodium acetate and water. 

This crude analysis is based on the behavior postulated by the Born equation. However, ion-pair formation equilibrium constants have been observed to deviate ma edly from that behavior (22/ -222)1 Oakenful, and Fenwick (222) found a maximum in the ion-pair formation constants of several alkylamines with carboxylic acids when determined at various methanol-water solvent compositions as shown by their data in Fig. 54. The results demonstrate that in this system the stability constant decreases with increasing organic solvent concentration above a.critical value which yields maximum stability. The authors suggested that this was due to a weakening of hydrophobic interactions between the ion-pair forming species by increased alcohol concentrations. In practice the effect of added organic solvent has been either to decrease the retention factor or to have virtually no effect. 

The definition of pH is pH = —log[H+] (which will be modified to include activity later). Ka is the equilibrium constant for the dissociation of an acid HA + H20 H30+ + A-. Kb is the base hydrolysis constant for the reaction B + H20 BH+ + OH. When either Ka or Kb is large, the acid or base is said to be strong otherwise, the acid or base is weak. Common strong acids and bases are listed in Table 6-2, which you should memorize. The most common weak acids are carboxylic acids (RC02H), and the most common weak bases are amines (R3N ). Carboxylate anions (RC02) are weak bases, and ammonium ions (R3NH+) are weak acids. Metal cations also are weak acids. For a conjugate acid-base pair in water, Ka- Kb = Kw. For polyprotic acids, we denote the successive acid dissociation constants as Kal, K, K, , or just Aj, K2, A"3, . For polybasic species, we denote successive hydrolysis constants Kbi, Kb2, A"h3, . For a diprotic system, the relations between successive acid and base equilibrium constants are Afa Kb2 — Kw and K.a Kbl = A w. For a triprotic system the relations are A al KM = ATW, K.d2 Kb2 = ATW, and Ka2 Kb, = Kw. 

Wilson and Cannan (18) reported detailed observations on the equilibrium and velocity constants in the glutamic acid—pyrrolidone carboxylic acid system in dilute aqueous solution. They found that the conversion of glutamic acid to pyrrolidone carboxylic acid follows the equation for a reversible first-order reaction. The equilibrium constant and the rate at which the equilibrium is achieved depend on the pH of the solution and the temperature. In neutral solutions, the equilibrium favors almost complete conversion of glutamic acid to pyrrolidone carboxylic acid however, the rate of the reaction is very slow and thus only 1% conversion occurs after 2-3 hr at 100°. In weakly acid (pH 4) and alkaline (pH 10) solutions, the conversion of glutamic acid to pyrrolidone carboxylic acid is much faster and about 98% conversion occurs in less than 60 hr. In strong acid (2 N HC1) and base (0.5 N NaOH) the conversion of pyrrolidone carboxylic acid to glutamic acid proceeds rapidly and virtually to completion. Other studies have shown that the conversion of glutamic acid to pyrrolidone carboxylic acid can be carried out within 2 hr at 142° with little alteration of optical rotation (80). 

---