Acetylacetone methylation

Although the Pinner pyrimidine synthesis was discovered a century ago only a few reports on the reaction mechanism have appeared. The condensation of acetylacetone, methyl acetoacetate, or dimethyl malonate with acetamidine (6) has been studied by Katritzky et al. and the reaction mechanisms for these processes have been proposed by these authors. Outlined below is the proposed mechanism of the condensation of methyl acetoacetate (4) with acetamidine (6)7... 

The configurational stability of tin in a monoorganotin complex has been determined by NMR too 33) compounds of the type Y—CH2Sn(acac)2X (Y = I, CH = CH2, COOEt) show four acetylacetonate methyl signals (and two aeetyl-acetonate CH signals) below —100 °C (in accordance with a cis configuration) which broaden and collapse between 0° and 40 °C because of an intramolecular averaging process. 

Several structurally different diketones (acetylacetone, methyl 2-oxocyclohex-ane carboxylate) and active methylene compounds (diethyl malonate, ethyl aceto-acetate) and thiols (methyl thioglycolate) underwent clean, fast, and efficient Michael addition with methyl vinyl ketone, acrolein, and methyl acrylate over NaY and Na beta zeolites [88] in high yield (70-80%). The reactions were performed in the absence of solvent, at room temperature, with 1 g catalyst per mmol donor. When HY zeolite was used instead of NaY formation of the desired Michael adduct was low and polymerization of Michael acceptor was the main reaction. 

NMR spectra in CHCIF2 solution indicate that [Zr(acac)2(N03)2] becomes stereochemi-cally rigid on the NMR time scale at temperatures below -144°C, and the spectra in the slow-exchange limit are consistent with the Ci-mmmm structure found in the solid state. Kinetic data for exchange of acetylacetonate methyl groups between the two inequivalent sites of the Ci-mmmm stereoisomer are included in Table 11. 

Methoxybutane-1,3-dione Methyl acetyl acetate Methyl acetylacetonate Methyl 3-oxobutanoate Methyl 3-oxobutyrate 3-Oxobutanoic acid methyl ester Classification Carboxylic acid ester Empirical CsHsOa Formula CH3COCH2COOCH3 Properties Colorless liq. very sol. in water sol. in alcohol, ether misc. with oxygenated soivs. m.w. 

Aluminum acetylacetonate Chromic acetylacetonate Cobalt acetate (ous) Cobalt acetylacetonate Dicyandiamide Diethylaminoethyl acrylate Ferric acetylacetonate Magnesium acetylacetonate Manganese acetylacetonate Methyl morpholine oxide... 

The reaction of methyl propionate and formaldehyde in the gas phase proceeds with reasonable selectivity to MMA and MAA (ca 90%), but with conversions of only 30%. A variety of catalysts such as V—Sb on siUca-alumina (109), P—Zr, Al, boron oxide (110), and supported Fe—P (111) have been used. Methjial (dimethoxymethane) or methanol itself may be used in place of formaldehyde and often result in improved yields. Methyl propionate may be prepared in excellent yield by the reaction of ethylene and carbon monoxide in methanol over a mthenium acetylacetonate catalyst or by utilizing a palladium—phosphine ligand catalyst (112,113). 

Decomposition of the diazoimide (551) by heating in the presence of copper acetylaceton-ate also generated a ketocarbene (552). This undergoes an intramolecular condensation to give the anhydro-4-hydroxy-3-methyl-4-p-nitrophenyl-2-phenyloxazolium hydroxide (553), which cannot be prepared by more classical means (75CL499). 

The mercaptals obtained by the acid catalyzed reaction of J3-ketoesters, e.g., ethyl acetoacetate, with methyl thioglycolate (73) undergo the Dieckmann cyclization with alcoholic potassium hydroxide at lower temperatures to give ethyl 3-hydroxy-5-methyl-2-thiophenecarboxylate (74) in 75% yield. ° Besides ethyl acetoacetate, ethyl a-ethylacetoacetate, ethyl benzoyl acetate, and ethyl cyclopentanonecarboxylate were also used in this reaction/ It is claimed that /8-diketones, hydroxy- or alkoxy-methyleneketones, or /8-ketoaldehyde acetals also can be used in this reaction. From acetylacetone and thioglycolic acid, 3,5-dimethyl-2-thiophenecarboxyl-ic acid is obtained. ... 

Tlie bifunctional sulfenyl chloride 213 was obtained by chlorination of 144 in good yield, although excessive chlorination led to the saturated compound 214 (94CB533). A series of compounds 215-220 were obtained from 213 by reactions with secondary amines ferf-butyl methyl ketone hexane-2,4-dione 2,6-dimethylcyclohexanone diethyl malonate and acetylacetone, respectively. 

Abbreviations acac, acetylacetonate Aik, alkyl AN, acetonitrile bpy, 2,2 -bipyridine Bu, butyl cod, 1,5- or 1,4-cyclooctadiene coe, cyclooctene cot, cyclooctatetraene Cp, cyclopentadienyl Cp, pentamethylcyclopenladienyl Cy, cyclohexyl dme, 1,2-dimethoxyethane dpe, bis(diphenyl-phosphino)ethane dppen, cis-l,2-bis(di[Atenylphosphino)ethylene dppm, bis(diphenylphosphino) methane dppp, l,3-bis(diphenylphosphino)propane eda,ethylenediamine Et,ethyl Hal,halide Hpz, pyrazole HPz, variously substituted pyrazoles Hpz, 3,5-dimethylpyrazole Me, methyl Mes, mesityl nbd, notboma-2,5-diene OBor, (lS)-endo-(-)-bomoxy Ph, phenyl phen, LlO-phenanthroline Pr, f opyl py, pyridine pz, pyrazolate Pz, variously substituted pyrazolates pz, 3,5-dimethylpyrazolate solv, solvent tfb, tetrafluorobenzo(5,6]bicyclo(2.2.2]octa-2,5,7-triene (tetrafluorobenzobanelene) THE, tetrahydrofuran tht, tetrahydrothicphene Tol, tolyl. 

CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Chrysene, 58,15, 16 fzans-Cinnamaldehyde, 57, 85 Cinnamaldehyde dimethylacetal, 57, 84 Cinnamyl alcohol, 56,105 58, 9 2-Cinnamylthio-2-thiazoline, 56, 82 Citric acid, 58,43 Citronellal, 58, 107, 112 Cleavage of methyl ethers with iodotri-methylsilane, 59, 35 Cobalt(II) acetylacetonate, 57, 13 Conjugate addition of aryl aldehydes, 59, 53 Copper (I) bromide, 58, 52, 54, 56 59,123 COPPER CATALYZED ARYLATION OF /3-DlCARBONYL COMPOUNDS, 58, 52 Copper (I) chloride, 57, 34 Copper (II) chloride, 56, 10 Copper(I) iodide, 55, 105, 123, 124 Copper(I) oxide, 59, 206 Copper(ll) oxide, 56, 10 Copper salts of carboxylic acids, 59, 127 Copper(l) thiophenoxide, 55, 123 59, 210 Copper(l) trifluoromethanesulfonate, 59, 202... 

In the early work on the thermolysis of metal complexes for the synthesis of metal nanoparticles, the precursor carbonyl complex of transition metals, e.g., Co2(CO)8, in organic solvent functions as a metal source of nanoparticles and thermally decomposes in the presence of various polymers to afford polymer-protected metal nanoparticles under relatively mild conditions [1-3]. Particle sizes depend on the kind of polymers, ranging from 5 to >100 nm. The particle size distribution sometimes became wide. Other cobalt, iron [4], nickel [5], rhodium, iridium, rutheniuim, osmium, palladium, and platinum nanoparticles stabilized by polymers have been prepared by similar thermolysis procedures. Besides carbonyl complexes, palladium acetate, palladium acetylacetonate, and platinum acetylac-etonate were also used as a precursor complex in organic solvents like methyl-wo-butylketone [6-9]. These results proposed facile preparative method of metal nanoparticles. However, it may be considered that the size-regulated preparation of metal nanoparticles by thermolysis procedure should be conducted under the limited condition. 

EDA = ethyl diazoacetate MDA = methyl diazoacetate OTf = 03SCF3 (trifluoro-methanesulfonate) acac = acetylacetonate hfacac = hexafluoroacetylacetonate. 

Palladium(II) acetate was found to be a good catalyst for such cyclopropanations with ethyl diazoacetate (Scheme 19) by analogy with the same transformation using diazomethane (see Sect. 2.1). The best yields were obtained with monosubstituted alkenes such as acrylic esters and methyl vinyl ketone (64-85 %), whereas they dropped to 10-30% for a,p-unsaturated carbonyl compounds bearing alkyl groups in a- or p-position such as ethyl crotonate, isophorone and methyl methacrylate 141). In none of these reactions was formation of carbene dimers observed. 7>ms-benzalaceto-phenone was cyclopropanated stereospecifically in about 50% yield PdCl2 and palladium(II) acetylacetonate were less efficient catalysts 34 >. Diazoketones may be used instead of diazoesters, as the cyclopropanation of acrylonitrile by diazoacenaph-thenone/Pd(OAc)2 (75 % yield) shows142). 

Copper(ll) acetylacetonate Copper, bis(2,4-pentanedionato-0,0 )- (9) (46369-53-3) Methyl diazoacetate Acetic acid, diazo-, methyl ester (8,9) (6832-16-2) Triethylammonium fluoride Triethylamine hydrofluoride (8) Elhanamine, N,N-diethyl-, hydrofluoride (9) (29585-72-6)... 

The reactions of D-glucose with 2,4-pentanedione (acetylacetone), diethyl 3-oxoglutarate, ethyl benzoylacetate, ethyl propionylacetate, ethyl butyrylacetate, ethyl isovalerylacetate, and methyl acetoacetate have been effected, with formation of crystalline products. 

Reactions leading to the formation of the catalytically active nickel hydride species from organonickel precursors (Section III) can be regarded as model reactions for olefin oligomerization reactions. The reactions described by Eq. (8) and Scheme 3 (Section III) show that RNiX compounds (R = methyl orallyl, X = halide or acetylacetonate) activated by Lewis acids add to double bonds under mild reaction conditions (-40° or 0°C). It follows further from these reactions that under conditions leading to olefin dimerization a rapid nickel hydride /3-hydrogen elimination reaction occurs. The fact that products resulting from olefin insertion into the nickel-carbon bond are only observed when /3-hydride... 

---