Acetonitrile, hydrolysis preparation

By the action of concentrated hydrochloric acid at about 40° upon aryl-acetonitriles hydrolysis is arrested at the arylacetamide stage (see Section IV, 160 for the preparation of phenylacetamide by this method) ... 

Allylalion of the alkoxymalonitrile 231 followed by hydrolysis affords acyl cyanide, which is converted into the amide 232. Hence the reagent 231 can be used as an acyl anion equivalent[144]. Methoxy(phenylthio)acetonitrile is allylated with allylic carbonates or vinyloxiranes. After allylation. they are converted into esters or lactones. The intramolecular version using 233 has been applied to the synthesis of the macrolide 234[37]. The /i,7-unsaturated nitrile 235 is prepared by the reaction of allylic carbonate with trimethylsilyl cyanide[145]. 

Adamantylamine is prepared from the corresponding alcohol or bromide by bridgehead cation generation in the presence of acetonitrile (49). Selective hydrolysis of the resultant acetamide to the rigid cycloahphatic amine by acid or base is difficult. 

Glycine ethyl ester hydrochloride has been prepared by the action of absolute alcohol and hydrogen chloride on glycine from glycyl chloride and alcohol by the action of ammonia or hexamethylenetetramine on chloroacetic acid, and subsequent hydrolysis with alcoholic hydrochloric acid and by the action of hydrogen chloride and alcohol on methyleneamino-acetonitrile. ... 

The formation of ethyl cyano(pentafluorophenyl)acetate illustrates the intermolecular nucleophilic displacement of fluoride ion from an aromatic ring by a stabilized carbanion. The reaction proceeds readily as a result of the activation imparted by the electron-withdrawing fluorine atoms. The selective hydrolysis of a cyano ester to a nitrile has been described. (Pentafluorophenyl)acetonitrile has also been prepared by cyanide displacement on (pentafluorophenyl)methyl halides. However, this direct displacement is always aecompanied by an undesirable side reaetion to yield 15-20% of 2,3-bis(pentafluoro-phenyl)propionitrile. 

Other electrophilic substitution reactions on aromatic and heteroaromatic systems are summarized in Scheme 6.143. Friedel-Crafts alkylation of N,N-dimethyl-aniline with squaric acid dichloride was accomplished by heating the two components in dichloromethane at 120 °C in the absence of a Lewis acid catalyst to provide a 23% yield of the 2-aryl-l-chlorocydobut-l-ene-3,4-dione product (Scheme 6.143 a) [281]. Hydrolysis of the monochloride provided a 2-aryl-l-hydroxycyclobut-l-ene-3,4-dione, an inhibitor of protein tyrosine phosphatases [281], Formylation of 4-chloro-3-nitrophenol with hexamethylenetetramine and trifluoroacetic acid (TFA) at 115 °C for 5 h furnished the corresponding benzaldehyde in 43% yield, which was further manipulated into a benzofuran derivative (Scheme 6.143b) [282]. 4-Chloro-5-bromo-pyrazolopyrimidine is an important intermediate in the synthesis of pyrazolopyrimi-dine derivatives showing activity against multiple kinase subfamilies (see also Scheme 6.20) and can be rapidly prepared from 4-chloropyrazolopyrimidine and N-bromosuccinimide (NBS) by microwave irradiation in acetonitrile (Scheme... 

Deoxy-l-fluoro-L-glycerol (18) has been prepared by, among other methods, the treatment of 3,4-0-benzylidene-2,5-0-methylene-l,6-di-O-p-tolylsulfonyl-D-mannitol107 (17) with tetrabutylammonium fluoride in acetonitrile, followed by removal of the benzylidene group, periodate oxidation, reduction with borohydride, and hydrolysis. 1,6-Dideoxy-l,6-difluorogalactitol108 was obtained by treatment of 2,3 4,5-di-0-isopropylidene-l,6-di-0-(methylsulfonyl)galactitol with tetra-... 

Type A trinuclear carboxylates are synthesized in general by basic hydrolysis of mononuclear salts.(3) The synthesis of 3B marked the introduction of the stepwise approach described in Scheme 1. The [Fe20Cl5]2- anion was used as the dinuclear component but, since it has a half-life of 1.3 hours in acetonitrile(8b), it can also be a source for mononuclear Fe + building blocks. Aqueous hydrolysis of Fe(0H)3 was used to synthesize 4E, while 8 was prepared by hydrolysis of the mononuclear salt, (C6Hi5N3)FeCl3 in the presence of NaBr. The basic hydrolysis of the dinuclear... 

The most frequently used method for the preparation of isoquinoline Reissert compounds is treatment of an isoquinoline with acyl chloride and potassium cyanide in water or in a dichloromethane-water solvent system. Though this method could be successfully applied in a great number of syntheses, it has also some disadvantages. First, the starting isoquinoline and the Reissert compound formed in the reaction are usually insoluble in water. Second, in the case of reactive acyl halides the hydrolysis of this reaction partner may became dominant. Third, the hydroxide ion present could compete with the cyanide ion as a nucleophile to produce a pseudobase instead of Reissert compound. To decrease the pseudobase formation phase-transfer catalysts have been used successfully in the case of the dichloromethane-water solvent system, resulting in considerably increased yields of the Reissert compound. To avoid the hydrolysis of reactive acid halides in some cases nonaqueous media have been applied, e.g., acetonitrile, acetone, dioxane, benzene, while utilizing hydrogen cyanide or trimethylsilyl cyanide as reactants instead of potassium cyanide. 

Acid hydrolysis reagent Mix 1 part of 37% HC1 with 23 parts of acetonitrile. Prepare freshly before each series of analyses. 

When aqueous solutions of the complexes [Co(NH3)5(N=CR)]3+ (R=Me or Ph) are treated with an excess of NaN3 at pH 5-6 (to prevent base hydrolysis to the amido complex) tetrazole complexes are formed (Scheme 17).32 The formation of 5-methyltetrazoIe from sodium azide and acetonitrile requires a reaction time of 25 h at 150 °C323 compared with only 2 h at ambient temperature for coordinated acetonitrile. The subsequent conversion of the N -bonded complex to an N2-bonded complex has been confirmed as the latter complex has been prepared and its crystal structure determined.324... 

Dissolve SMPT (Pierce) at a concentration of 7.7 mg/ml in acetonitrile (makes a 20 mM stock solution). Alternatively, the water-soluble Sulfo-LC-SMPT may be used and dissolved at a concentration of 6 mg/ml in water (makes a 10 mM solution). This should be done just prior to adding an aliquot to the thiolation reaction. Since an aqueous solution of the cross-linker will degrade by hydrolysis of the sulfo-NHS ester, it should be used quickly to prevent significant loss of activity. If a sufficiently large amount of protein will be modified to allow accurate weighing of Sulfo-LC-SMPT, the solid may be added directly to the reaction mixture without preparing a stock solution in water. 

Carbamate pesticides are best analyzed by HPLC using postcolumn deriva-tization technique. Some common carbamate pesticides are listed in Table 2.19.1. Compounds are separated on a C-18 analytical column and then hydrolyzed with 0.05 N sodium hydroxide. Hydrolysis converts the carbamates to their methyl amines which are then reacted with o-phthalaldehyde and 2-mercaptoethanol to form highly fluorescent derivatives. The derivatives are detected by a fluorescence detector. o-Phthaladehyde reaction solution is prepared by mixing a 10-mL aliquot of 1% o-phalaldehyde solution in methanol to 10 mL of acetonitrile containing 100 pL of 2-mercaptoethanol and then diluting to 1 L with 0.05 N sodium borate solution. 

---