Abrasion of surfaces

The abrasivity of surfaces is related to the shape of surface profiles and can be described numerically. The morphology of wear particles, in terms of their shape, size, and surface texture, reflects the complex nature of the wear process involved in particle formation (Stachowiak, 1998 and 2000 Stachowiak and Podsiadlo, 1999 and 2001). The cumulative evaluation of turbine lubricating oil system, using techniques such as automatic particle counters, ferrography, ICP-AES spectroscopy, and scanning electron microscopy indicated the involvement of very small iron particles in the size range of 1-10 microns or less, and abrasive wear silica particles in the size range of 10-40 microns (Korycki and Wislicki, 1991). 

Abrasion of surface (sandblasting, coarse sandpaper, etc.) plus solvent wipe Medium- to high-strength... 

Clearly, any abrasion of surface oxide by the hard crystal edges of the molybdenum disulphide is likely to be particularly important in exposing free metal to reaction with the sulphur atoms. In addition, the depletion of surface oxide in sliding in high vacuum should make it easier for molybdenum disulphide to attach to a worn surface, but the potential of this for re-supply of a molybdenum disulphide film in high vacuum applications has apparently not been studied. 

Hexafluorozirconic acid is used ia metal finishing and cleaning of metal surfaces, whereas the fluorozirconates are used in the manufacture of abrasive grinding wheels, in aluminum metallurgy, ceramics industry, glass manufacturing, in electrolytic cells, in the preparation of fluxes, and as a fire retardant (see Abrasives Metal surface treati nts). 

Nitriding can impart significant wear resistance to steel surfaces, as illustrated in Eigure 8. The resistance to abrasion of an uncase hardened steel compared to that of the same steel nitrided, and the steel having a carburized case, is shown (3,17). Improvement in weight loss is related direcdy to the hardness of the case. 

Modem furniture pohshes are designed for a wide variety of surfaces, eg, plastics, metals, and synthetic and natural resin coatings. Furniture pohshes impart shine and provide protection from abrasion, marring, and spills. The formulations clean weU in many cases. In common with most other pohshes, furniture pohshes are characterized by ease and speed of apphcation and of buffing, and by either the absence of objectionable odors or the addition of pleasing ones. 

The result is a hard, abrasion-resistant surface, important in many appHcations of cast kon. The depth of the chill may be controlled by regulating the amount of tellurium added. The casting shows a sharp demarcation line between the chilled and unchilled regions there is no intermediate or motded zone. Yet, the chilled portion shows excellent resistance to spalling from thermal or mechanical shock. Tellurium-treated kon is more resistant to sulfuric and hydrochloric acids than is untreated, unchilled gray kon. The amount added ranges from 0.005 to 0.1% ca 60% is lost by volatilization. Excessive addition causes porosity in the castings. 

To remain safe and efficacious on the eye, contact lenses must maintain clear and wetted surfaces, provide an adequate supply of atmospheric oxygen to and adequate expulsion of carbon dioxide from the cornea, allow adequate flow of the eye s tear fluid, and avoid excessive abrasion of the ocular surface or eyeflds, all under a variety of environmental conditions. The clinical performance of a contact lens is controlled by the nature of the lens material the lens design the method and quaUty of manufacture the lens parameters or specifications prescribed by the practitioner and the cleaning, disinfection, and wearing procedures used by the patient. 

Other shapes such as horizontal bayonets have been used. In any such installations adequate provision must be made for abrasion of the exchanger surface by the bed. 

Because of the random motion of the sohds, some abrasion of the surface occurs. This is generally quite small, usually amounting to about 0.25 to 1 percent of the solids per day. 

PDMS macromonomer was used as a component of block segment to obtain a graft block copolymer with PMMA (Scheme 1) [51-53]. This graft block copolymer is characteristic of surface water repellence, easy peeling, and weatherability superior to simple graft copolymers of the same members. PDMS-b-PVC film also shows long life surface water repellency with weatherability and very low coefficiency of abrasion [18,54]. 

Surface preparation is of prime importance, and optimum performance of modern protection coatings can be achieved only if the surface of the steel has been adequately treated. The method of surface preparation depends on the shape and size of the structure or component. Thus it is preferable to blast-clean an openwork steel structure by manual methods, since with this type of structure automatic blast cleaning would lead to excessive impingement of the abrasive on the machine itself. 

Very high standards of surface preparation are necessary, e.g. abrasive blast cleaning to Sa2y, BS7079 Part Al, 1989 for steel components... 

Pseudomorphism has less desirable consequences, and usually means are sought to suppress it. If the substrate has been scratched, ground or abrasively polished, or if it has been cold rolled or cold formed, the surface is left in a peculiar state. Cold working reduces the surface grain size, and produces deformed, shattered and partly reoriented metal. It may produce microcrevices between the deformed grains, and, with some processes, non-metallic impurities and oxides are embedded in the surface. The disturbed state of the substrate is copied by a pseudomorphic electrodeposit with several consequences (Fig. 12.7). One is aesthetic it has often been noted that almost invisible abrasion of the substrate develops as more prominent... 

Resistance to abrasion The resistance to abrasion of electroless nickel-phosphorus hardened to 600 Hy, assessed by Taber abrasion tests, has been found to be double that of electroplated nickel However, electroless nickel coatings are not suitable for applications where two electroless nickel surfaces rub together without lubrication unless the values of hardness are made to differ by over 200 Hy units. Galling of aluminium, titanium or stainless steel may be overcome by applying electroless nickel to one of the two mating surfaces. 

This is the most important and most widely used mechanical method of surface preparation. Originally, sand was used as an abrasive but now, because of the hazard to health, it has already been replaced in the UK by metal or non-silicon materials. There are two main types of process. 

In the flat/container glass fields a wide range of surface treatments now exist which modify the surface of the glass to confer corrosion or abrasion resistance, improve mechanical strength or optical properties. A number of treatments which claim to improve chemical or corrosion resistance are described in References 31 to 35. 

---