Yttria components

Reaction of perovskite with the yttria (dopant) component in YSZ Since the yttria component has a large stabilisation on forming solid solution, it is rare for it to react with other oxides. One exceptional case is the reaction with vanadium oxide ... 

TBCs consist of two different materials applied to the hot side of the component a bond coat applied to the surface of the part, and an insulating oxide applied over the bond coat. Characteristics of TBCs are that the insulation is porous, and they have two layers. The first layer is a bond coat of NICrAlY, and the second is a top coat of YTTRIA stabilized Zirconia. 

The perovskite oxides used for SOFC cathodes can react with other fuel cell components especially with yttria-zirconia electrolyte and chromium-containing interconnect materials at high temperatures. However, the relative reactivity of the cathodes at a particular temperature and the formation of different phases in the fuel cell atmosphere... 

The separation and identification of the components of yttria and ceria came along with the development of new laboratory and industrial techniques, analytical instruments and procedures. Prominent among the latter are those of emission and absorption spectroscopy, without which confirmation of purity would have been impossible. 

Ekstrom, T., Holmstrom, M., Olsson, P.O. (1991), Yttria doped Si2N20 in Proc. 4th Int. Symp. on Ceramic Materials and Components for Engines, Amsterdam. 

Lanthanide chemistry started in Scandinavia. In 1794 Johann Gadolin succeeded in obtaining an earth (oxide) from a black mineral subsequently known as gadolinite he called the earth yttria. Soon afterwards, M.H. Klaproth, J.J. Berzelius and W. Hisinger obtained ceria, another earth, from cerite. However, it was not until 1839-1843 that the Swede C.G. Mosander first separated these earths into their component oxides thus ceria was resolved into the oxides of cerium and lanthanum and a mixed oxide didymia (a mixture of the oxides of the metals from Pr through Gd). The original yttria was similarly separated into substances called erbia, terbia, and yttria (though some 40 years later, the first two names were to be reversed ). This kind of confusion was made worse by the fact that the newly discovered means of spectroscopic analysis permitted misidentifications, so that around 70 new elements were erroneously claimed in the course of the century. 

Doped materials, where a structural component of the material becomes partially substituted by a dopant species or when external species ingress in the original material as an interstitial ion. The term doping is thus applied to, for instance, yttria-doped zirconias used for potentiometric determination of O2 but also to describe the incorporation of Li in polymers and nanostructured carbons. 

It consisted of a solid electrolyte disk (thickness 2 mm) made of yttria (8.5 wt. %) stabilized zirconia, which was coated with the same active component (cf. 2.3.) used in the reactor on the measuring side, and with a porous platinum electrode on the reference side. The measuring... 

The present work was focused on the synthesis of nanocrystalline components for electrochemical cells via the cellulose-precursor technique. This method was used to prepare nanostructured intermediate-temperature (IT) SOFC anodes made of a series of cermets comprising gadolinia-doped ceria (CGO), yttria-stabilized zirconia (YSZ), Gdi.86Cao.i4Ti207.5 (GCTO) pyrochlore, metallic nickel and copper. Perovskite-type SrFcojAlo.sOs.s (SFA) powder, also obtained via the cellulose precursor, was applied onto membranes of the same composition to enhance specific surface area and electrocatalytic activity in the reactors for methane conversion [3]. 

---