Above ground working

A hazard is something with the potential to oause harm, for example, ohemicals, electricity or working above ground,... 

Working above ground level creates added dangers and slows down the work rate of the electrician. New Work at Height Regulations came into force on 6 April 2005. Every precaution should be taken to ensure that the working platform is appropriate for the purpose and in good condition. 

The term ladder is generally taken to include stepladders and trestles. The use of ladders for working above ground level is only acceptable for access and work of short duration (Work at Height Regulations 2005). 

When working above ground for long periods of time the most appropriate piece of equipment to use would be... 

We looked at this topic as it applies to electrical personnel in Chapter 1 under the subheading Working above ground . 

We will look at the hazards associated with working above ground and good manual handling techniques in Chapter 8 of this book. 

We began to look at safe electrical isolation procedures in Chapter 1 and then discussed this topic further in Chapter 8, together with safe manual handling techniques and safe procedures for working above ground. 

Working above ground or where there is a risk of faiiing... 

When working above ground or floor level, use a platform with toeboards and standard railings, or use a safety harness and lifeline. Also protect workers from stray sparks or slag in the area below an elevated surface where welding is taking place. 

---