Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Weight filler

This type of filler is a growing type of system in filling oil-based product since the expense of the product justifies the cost of a net weight filler. [Pg.2660]

An auger screw for powders or very viscous materials is another means of volumetric filling and relies on a number of whole turns or part turns of the screw. Weight fillers can be based on a bulk weighing plus a trickle feed fill-up. [Pg.165]

Uses Light weight filler for coatings, plastics, and adhesives reduces density increases solids volume improves impact and thermal shock resist. [Pg.114]

An ideal filler would be low in cost compared to the PVC, have perfectly spherical particles with a small but uniform particle size and distribution, be easily dispersed within the polymer matrix, have a refractive index that could be chosen to either increase opacity or provide clarity, and have a low densily or specilie gravity compared to PVC. Since PVC compounds compete on a cosl/volume basis against other polymers, PVC s high density compared to polyolefins or polycarbonates often places the final formulation at a disadvantage when measured solely on eost per unit of weight. Fillers, while providing rigidity and reinforcement, will also lower the formulation costs. [Pg.375]

Kron, A. (2005) Low weight filler -thermally expandable hollow polymer microspheres. Proceedings of the High Performance Fillers RAPRA Conference, March 2005, Cologne, Germany. [Pg.439]

Figure 5.4 The relationship between dynamic storage modulus and angular frequency for polypropylene containing uncoated magnesium hydroxide fillers (60% by weight filler)... Figure 5.4 The relationship between dynamic storage modulus and angular frequency for polypropylene containing uncoated magnesium hydroxide fillers (60% by weight filler)...
A variant for sinks and flat Stock production, c. 700 e. 21/25 A low exotherm variant to aid the use of light-weight fillers, c. 1150 e. 21/25 A room temperature BPO cure resin, c. 875 e. 20 5 A general purpose marble casting resin, c. 1275 e. 18.5/25 Ahigh viscosity version of SIL 90BA-1000. c. 3150 A summer version of SIL 90BA-1000. e. 40/25... [Pg.244]

The tensile strengths of composites containing the treated and untreated fillers are shown in Figure 11. At 20% by weight filler loading the tensile strength of polypropylene was reduced by all three fillers. This had been expected since all the... [Pg.204]

Weight Polymer Gravity Weight Filler Gravity Gravity... [Pg.453]


See other pages where Weight filler is mentioned: [Pg.1963]    [Pg.11]    [Pg.175]    [Pg.78]    [Pg.1721]    [Pg.2660]    [Pg.2661]    [Pg.26]    [Pg.1967]    [Pg.422]    [Pg.323]    [Pg.134]    [Pg.559]    [Pg.299]    [Pg.3135]    [Pg.175]    [Pg.341]    [Pg.372]   
See also in sourсe #XX -- [ Pg.307 ]




SEARCH



Filler weight fraction

© 2024 chempedia.info