Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Satin weave

There are many types of weaving patterns for woven fabrics and the four basic types are plain weave, twill weave, satin weave, and plain reverse Dutch weave (Svarovsky 1990) as shown in Figure 22.66. The filtration performances of the four types of weaves are shown in Table 22.13. [Pg.1659]

A LEF based on a commercial POF has been developed and tested. It is based on a new weave pattern made from a simple weave (satin weave) and designed to produce a large diffuser (20 cm of useful width) with minimised heterogeneity of hght intensity and optimised intensity of illumination. [Pg.192]

Although there are several weaves, three basic ones were chosen plain, twill, and satin. Research has shown that the plain weave and twill weave have, respectively, better thermal conductivity and thermal resistance than satin weave. Satin weave is suitable for complex surfaces due to its flexibility. Thus, PES,- and PES/CO, ie, [1,3], respectively, yams of polyester and polyester/cotton, were used for the textile auxiliary wall with the stracture of plain (PESi, PES/COi), twill 4/lZ (PES2, PES/CO2), and satin 5 (PES3, PES/CO3). Although the warp density is 21 yams/cm for all woven stmctures, the weft density changes depending on the woven stmcture plain, 10 yams/cm twill, 15 yams/cm and satin, 18 yams/cm. [Pg.436]

Plain Weaves Rib Weaves Basket Weave Twill Weaves Satin Weaves... [Pg.231]

Fabrics of Woven Fibers For cake filtratiou these fabrics are the most common type of medium. A wide variety of materials are available some popular examples are listed in Table 18-10, with ratings for chemical and temperature resistance. In addition to the mate-ri of the fibers, a number of construction characteristics describe the filter cloth (1) weave, (2) style number, (3) weight, (4) count, (5) ply, and (6) yarn number. Of the many types of weaves available, only four are extensively used as filter media plain (square) weave, twill, chain weave, and satin. [Pg.1706]

Indicate, if known, preferred bag material that will withstand environment, e.g., fibers of glass, polyester, Teflon , Nomex , polypropylene, polyethylene, cotton, wool, nylon, Orion , Dacron , and Dynel . The type of weave of fiber should be recommended by the manufacturer. The fabrics may be felted or woven [47,48] in weaves of plain, satin, or twill, and should be resistant to any corrosive material in the solid particles or the gas stream. [Pg.273]

In Chinese silks of both plain weave and satin weave, the selvedges were observed to contrast in color, and at times in weave, from the ground color of the fabric. (White Chinese silks often had yellow or green selvedges.) Such a contrast was not regularly found on Western silks. [Pg.134]

Figure 6.9 An 8-harness satin weave fabric of Nextel 720 fiber (courtesy of N. Chawla)... Figure 6.9 An 8-harness satin weave fabric of Nextel 720 fiber (courtesy of N. Chawla)...
However applied, these products can be used to stabilize weave and to impart special finish effects to fabrics made of cotton, wool, synthetic fibers and filaments, and to mixtures. Treatment gives outstanding finishes on nylon and Dacron marquisettes, rayon linings, satins, taffetas, ribbons, rayon and wool blends, fiberglass fabrics and viscose rayon suitings. Application requires no special equipment and no curing. [Pg.431]

Septa may be made of metal, natural, or synthetic yams. Plain, twill, and dutch weaves are available in the metal cloths. In the natural and synthetic fiber cloths, plain, twill, chain, and satin weaves in monofilament, multifilament, and staple yams have been used. [Pg.177]

With natural and synthetic fibers, going from plain through twill to satin weave, cake retention is increased. Discharge characteristics, resistance to blinding, and flow rate decrease in the same order. The same order of events also takes place when going from monofilament through multifilament to staple yarn. [Pg.177]

Different weaving patterns of these materials will also vary cloth performance. Plain, twill and satin weaves are three of the most common. Their effect on cloth performance is shown in Table 2. [Pg.249]

CS348 - 8H Satin Weave, 50 x 50 count,. 008" thick CS352 - Plain Weave, 17 x 17 count,. 004" thick. [Pg.381]

Egyptian development See casting, investment, eight-harness satin weave See fabric, woven eight-harness satin. [Pg.221]


See other pages where Satin weave is mentioned: [Pg.49]    [Pg.268]    [Pg.507]    [Pg.268]    [Pg.507]    [Pg.49]    [Pg.268]    [Pg.507]    [Pg.268]    [Pg.507]    [Pg.5]    [Pg.458]    [Pg.296]    [Pg.508]    [Pg.207]    [Pg.458]    [Pg.105]    [Pg.233]    [Pg.236]    [Pg.5]    [Pg.15]    [Pg.448]    [Pg.230]    [Pg.5]    [Pg.459]    [Pg.185]    [Pg.186]    [Pg.189]    [Pg.190]    [Pg.267]    [Pg.267]    [Pg.268]    [Pg.268]    [Pg.484]   
See also in sourсe #XX -- [ Pg.15 ]




SEARCH



5-harness satin weave

Eight-harness satin weave

Fabric harness satin-weave

Four-harness satin weave

Satin

Satin-weave fabric

Satinizing

Weave

© 2024 chempedia.info