Waste blending

Contaminated feed materials must have a minimum solids content of 60% to facilitate materials handling operations. The vendor advises that the unit has a waste heat value upper limit of approximately 300 British thermal unit (Btu) per pound (Btu/lb). Waste blending or homogenization is recommended as a means to evenly distribute both moisture and Btu content. [Pg.771]

Parameter Primary biosolids Primary activated biosolids RDF-biosolids blend Biomass-waste blend Coastal Bermuda grass Kentucky bluegrass Giant brown kelp Water hyacinth... [Pg.474]

Component Coastal Bermuda grass Giant brown kelp Biomass-waste blend ... [Pg.475]

U.S. Pat. No. 5,981,631 (November 9, 1999). C.P. Ronden and J.C. Morin. Process for the production of composites of co-mingled thermoset resin bonded wood waste blended with thermoplastic polymers. [Pg.118]

Advanced Digestion Process Development for Methane Production from Biomass-Waste Blends... [Pg.251]

Steady-state performance of conventional high-rate mesophilic digestion of the biomass-waste blend at the baseline loading and detention time is presented in Table I. The methane yields from replicate baseline runs ranged... [Pg.258]

Figure 5. Two-phase system for biomass-waste blend...

Scheme of bioutilisation of textile waste blends composed of cellulose and polyester fibres. ... [Pg.132]

Mechanical properties of HDPE /LDPE and HDPE / waste blends obtained by injection molding with and without interfacial agents (lA)... [Pg.69]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...