Washing adhesion

Symposium on Recent Developments in Adhesive Chemistry (1983 Seattle, Wash.) Adhesive chemistry, developments and trends. 

Some amino resins are used as additives to modify the properties of other materials. For example, a small amount of amino resin added to textile fabric imparts the familiar wash-and-wear quaUties to shirts and dresses. Automobile tires are strengthened by amino resins which improve the adhesion of mbber to tire cord (qv). A racing sailboat may have a better chance to win because the sails of Dacron polyester have been treated with an amino resin (1). Amino resins can improve the strength of paper even when it is wet. Molding compounds based on amino resins are used for parts of electrical devices, botde and jar caps, molded plastic dinnerware, and buttons. 

In industrial production of acid-modified starches, a 40% slurry of normal com starch or waxy maize starch is acidified with hydrochloric or sulfuric acid at 25—55°C. Reaction time is controlled by measuring loss of viscosity and may vary from 6 to 24 hs. For product reproducibiUty, it is necessary to strictly control the type of starch, its concentration, the type of acid and its concentration, the temperature, and time of reaction. Viscosity is plotted versus time, and when the desired amount of thinning is attained the mixture is neutralized with soda ash or dilute sodium hydroxide. The acid-modified starch is then filtered and dried. If the starch is washed with a nonaqueous solvent (89), gelling time is reduced, but such drying is seldom used. Acid treatment may be used in conjunction with preparation of starch ethers (90), cationic starches, or cross-linked starches. Acid treatment of 34 different rice starches has been reported (91), as well as acidic hydrolysis of wheat and com starches followed by hydroxypropylation for the purpose of preparing thin-hoiling and nongelling adhesives (92). 

Hypalon CP 826. This is a chloriaated, maleic anhydride modified polypropylene having a chlorine content of about 25% and maleic anhydride content of about 0.8%, developed to promote adhesion of inks and coatiags to polypropyleae or bleads containing polypropyleae. It has a solutioa viscosity of 125 mPas(= cP) at 20% soHds ia xyleae and can be used ia dilute solutioas as a wash primer or a tie layer betweea materials that are difficult to adhere. CP 827 is a higher molecular-weight analogue with a solution viscosity of 280 mPas(= cP) at 20% soHds ia 80/20 xylene/methyl isobutyl ketoae. 

The main application of poly (vinyl formal) is as a wire enamel in conjunction with a phenolic resin. For this purpose, polymers with low hydroxyl (5-6%) and acetate (9.5-13%) content are used. Similar grades are used in structural adhesive (e.g. Redux) which are also used in conjunction with phenolic resin. Poly(vinyl formal) finds some use as a can coating and with wash primers. Injection mouldings have no commercial significance since they have no features justifying their use at current commercial prices. 

While etch primers, also known as pretreatment primers and wash primers, can be regarded as priming paints which promote their own adhesion by etching the metal surface, they may also be regarded as phosphate/chromate etching treatments which leave an organic residue on the surface to form the basis of the subsequent paint scheme. A detailed account of the etch primers has been given by Coleman . 

Not all modified starches are suitable for removal by aqueous dissolution alone. Such modifications of natural starches are carried out to reduce solution viscosity, to improve adhesion and ostensibly to enhance aqueous solubility. Commercial brands vary [169], however, from readily soluble types to those of limited solubility. Indeed, some may be as difficult to dissolve as potato starch if they have been overdried. It is thus very important to be sure of the properties of any modified starch present. If there are any doubts about aqueous dissolution, desizing should be carried out by enzymatic or oxidative treatment. Even if the size polymer is sufficiently soluble, it is important to ensure that the washing-off range is adequate. Whilst the above comments relate to modified starches, other size polymers such as poly(vinyl acetate/alcohol) and acrylic acid copolymers vary from brand to brand with regard to ease of dissolution. 

No adhesion was obtained when alkaline washes were used thus neutral aqueous degreasers/cleaners are recommended. 

---