Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Vinylic radicals, reactions

The reaction has also been extended to the analogous vinyl bromides [30]. Indeed, the alkenyl bromide 77 under normal reduction conditions gave the bicyclic compound 78 in good yield by an Sni reaction given by the vinyl radical (Reaction 6.17). Under these conditions, the reduction products could not be observed which suggests a very fast unimolecular reaction. [Pg.134]

Mertens R, von Sonntag C (1994) Determination of the kinetics of vinyl radical reactions by the characteristic visible absorption of vinyl peroxyl radicals. AngewChem Int Ed Engl 33 1262-1264 Mezyk SP, Madden KP (1999) Self-recombination rate constants for 2-propanol and ferf-butyl alcohol radicals in water. J Phys Chem A 103 235-242... [Pg.130]

For most vinyl polymers, head-to-tail addition is the dominant mode of addition. Variations from this generalization become more common for polymerizations which are carried out at higher temperatures. Head-to-head addition is also somewhat more abundant in the case of halogenated monomers such as vinyl chloride. The preponderance of head-to-tail additions is understood to arise from a combination of resonance and steric effects. In many cases the ionic or free-radical reaction center occurs at the substituted carbon due to the possibility of resonance stabilization or electron delocalization through the substituent group. Head-to-tail attachment is also sterically favored, since the substituent groups on successive repeat units are separated by a methylene... [Pg.23]

During the polymeriza tion process the normal head-to-tad free-radical reaction of vinyl chloride deviates from the normal path and results in sites of lower chemical stabiUty or defect sites along some of the polymer chains. These defect sites are small in number and are formed by autoxidation, chain termination, or chain-branching reactions. Heat stabilizer technology has grown from efforts to either chemically prevent or repair these defect sites. Partial stmctures (3—6) are typical of the defect sites found in PVC homopolymers (2—5). [Pg.544]

Without other alternatives, the carboxyalkyl radicals couple to form dibasic acids HOOC(CH)2 COOH. In addition, the carboxyalkyl radical can be used for other desired radical reactions, eg, hydrogen abstraction, vinyl monomer polymerization, addition of carbon monoxide, etc. The reactions of this radical with chloride and cyanide ions are used to produce amino acids and lactams employed in the manufacture of polyamides, eg, nylon. [Pg.113]

Addition. Chlorine adds to vinyl chloride to form 1,1,2-trichloroethane [79-00-5] (44—46). Chlorination can proceed by either an ionic or a radical path. In the Hquid phase and in the dark, 1,1,2-trichloroethane forms by an ionic path when a transition-metal catalyst such as ferric chloride [7705-08-0], FeCl, is used. The same product forms in radical reactions up to 250°C. Photochernically initiated chlorination also produces... [Pg.414]

A free-radical reaction is a chemical process which involves molecules having unpaired electrons. The radical species could be a starting compound or a product, but the most common cases are reactions that involve radicals as intermediates. Most of the reactions discussed to this point have been heterolytic processes involving polar intermediates and/or transition states in which all electrons remained paired throughout the course of the reaction. In radical reactions, homolytic bond cleavages occur. The generalized reactions shown below illustrate the formation of alkyl, vinyl, and aryl free radicals by hypothetical homolytic processes. [Pg.663]

Several intermediates are involved in the latter reaction. The first is a radical anion resulting from electron transfer from sodium to the alkyne. This then deprotonates ammonia leading to a vinyl radical. The process repeats (electron transfer and deprotonation), and involves a vinyl anion intermediate. [Pg.117]

Most radicals located on double bonds (e.g. 4, 5) or aromatic systems (e.g. 6) are a-radicals. The free spin is located in an orbital orthogonal to the it-bond system and it is not delocalized. The orbital of the vinyl radical (4) containing the free spin can be cis- or trans- with respect to substituents on the double bond. The barrier for isomerization of vinyl radicals can be significant with respect to the rate of reaction. [Pg.13]

The reaction of organolithium reagents is rapid and complete in less than 1 min even at low temperature, while Grignard reagents require 12-24h at room temperature to react completely. Treatment of ( )- or (Z)-l-methylsulfonyl-2-phenylethylene with trialkylbo-ranes yields exclusively ( )-olefins via a vinyl radical intermediate14. [Pg.765]

In the thermal reaction of aliphatic and aromatic sulfonyl chlorides with acetylenes no adduct has been observed82. However, the light-catalyzed additions of sulfonyl iodides to acetylenes83 as well as the thermal addition of sulfonyl bromides to phenylacetylene84 to form 1 1 adducts have been shown to be stereoselective and to occur in good to excellent yields. The fact that the addition occurs in a trans manner forced the authors83,84 to suggest that chain transfer by the sulfonyl halide (k ) is much faster than isomerization of the intermediate vinyl radical (k2) (see Scheme 5). [Pg.1106]

The reaction proceeds by a radical chain mechanism analogous to that outlined in equations 38-40. The observed stereoselectivity in the above addition indicates that reaction between the intermediate vinyl radical, ArS02CH=CR, and PhSeS02Ar must... [Pg.1108]

The chain C, H2/i+i represented mainly by C4H9+ and C6Hi3+ is produced by Reactions 21 and 22 from the C2H3+ ion. The vinyl radical ion is also responsible for the CnH2n i+ series represented largely by C6Hn + and C8H15+. [Pg.242]

Radical Diels-Alder reactions have been used mainly to synthesize polycyclic molecules. These reactions, like those that involve cations and anions as components, proceed quickly but generally do not give high yields. Thus, the tricyclic enone 14 is the result of an intramolecular Diels-Alder reaction of quenched vinyl radical intermediate 13 obtained by treating the iododienynone 12 with n-tributyltin hydride/2,2 -azobisisobutyronitrile (AIBN) [28] (Equation 1.11). [Pg.8]

Radical-based carbonylation procedures can be advantageously mediated by (TMSlsSiH. Examples of three-component coupling reactions are given in Reactions (74) and (75). The cascade proceeds by the addition of an alkyl or vinyl radical onto carbon monoxide with formation of an acyl radical intermediate, which can further react with electron-deficient olefins to lead to the polyfunctionalized compounds. ... [Pg.153]

Thus, this first example of stereoselective radical reaction, initiated with the system based on Fe(CO)5, shows opportunities and prospects of using the metal complex initiators for obtaining the stereomerically pure adducts of bromine-containing compounds to vinyl monomers with chiral substituents. [Pg.192]

When free radicals are added to 1,5- or 1,6-dienes, the initially formed radical (9) can add intramolecularly to the other bond, leading to a cyclic product (10). When the radical is generated from an precursor that gives vinyl radical 11, however, cyclization leads to 12, which is in equilibrium with cyclopropylcarbinyl radical 13 via a 5-exo-trig reaction. A 6-endo-trig reaction leads to 14, but unless there are perturbing substituent effects, however, cyclopropanation should be the major process. [Pg.978]

There is no indication as to whether these compounds are formed by hot or thermal reactions. Many of the products e.g. the vinyl compounds and the polymers) are explainable as resulting from free radical reactions. The virtual disappearance of the parent compound at high radiation doses is attributable to the interception of the stepwise reformation by competing radical reactions. The decrease in vinyl compounds is explained as being due to increased polymerisation. [Pg.74]

The reverse reaction (that is, the oxidation of a vinyl radical by Fe to the corresponding vinyl cation) may be involved in the reaction of the dimethyl ester of acetylenedicarboxyUc acid 261 with Fenton s reagent [Fe —H2O2, (217)] (216). When 261 was treated with Fe —H2O2 and the reaction mixture was extracted with ether, a small amount of furan 262 was isolated. A possible mechanism (216) for its formation may be addition of hydroxyl radical to the triple bond of 261, followed by addition of the intermediate vinyl radical to a second molecule of 261 and oxidation of the resulting radical with Fe to the corresponding vinyl cation, followed by cyclization to 262, as shown in Scheme XX. [Pg.315]

Figure 10. Three-dimensional potential-energy surface for the H + C2H3 C2H4 addition reaction. The lower left plot is taken in the symmetry plane of the vinyl radical. The other plots are taken in parallel planes at distances of O.S. O a.u. from the symmetry plane (1 a.u. = 0.52918 A). Solid contours are positive, dashed contours are negative, and the zero-energy contour (defined to be the energy of the reactant asymptote) is shown with a heavy sohd fine. The contour increment is 1 kcalmoU. Reproduced from [57] by pentrission of the PCCP Owner Societies. Figure 10. Three-dimensional potential-energy surface for the H + C2H3 C2H4 addition reaction. The lower left plot is taken in the symmetry plane of the vinyl radical. The other plots are taken in parallel planes at distances of O.S. O a.u. from the symmetry plane (1 a.u. = 0.52918 A). Solid contours are positive, dashed contours are negative, and the zero-energy contour (defined to be the energy of the reactant asymptote) is shown with a heavy sohd fine. The contour increment is 1 kcalmoU. Reproduced from [57] by pentrission of the PCCP Owner Societies.

See other pages where Vinylic radicals, reactions is mentioned: [Pg.190]    [Pg.324]    [Pg.466]    [Pg.190]    [Pg.324]    [Pg.466]    [Pg.320]    [Pg.220]    [Pg.123]    [Pg.352]    [Pg.679]    [Pg.692]    [Pg.753]    [Pg.254]    [Pg.541]    [Pg.386]    [Pg.386]    [Pg.387]    [Pg.478]    [Pg.5]    [Pg.597]    [Pg.1021]    [Pg.140]    [Pg.166]    [Pg.1040]    [Pg.866]    [Pg.424]    [Pg.64]   
See also in sourсe #XX -- [ Pg.70 ]




SEARCH



Ethers, vinyl reaction with radicals

Radicals vinyl radical

Vinyl double bonds reaction with secondary radicals

Vinyl radical, reaction

Vinyl radical, reaction

Vinyl radicals

Vinyl radicals addition reactions

Vinyl reaction

© 2024 chempedia.info