Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Vibrational transitions spectroscopy

The background on Brdneted acid hydroxyls Is discussed on the bases of quantum-chemical cluster calculations, and vibrational spectroscopy. Transition states of carbocalions on zeolites and their reactivity is rationalized. [Pg.11]

The convention of indicating a transition involving an upper electronic state N and a lower electronic state M by N-M is analogous to that used in rotational and vibrational spectroscopy. [Pg.215]

In Section 6.1.3 it was noted that vibrational overtone transitions, whether observed by infrared or Raman spectroscopy, are very weak. They become even weaker as the vibrational quantum number increases. The high sensitivity of CRDS makes it an ideal technique for attempting to observe such transitions. [Pg.386]

Since the vibrational spectra of sulfur allotropes are characteristic for their molecular and crystalline structure, vibrational spectroscopy has become a valuable tool in structural studies besides X-ray diffraction techniques. In particular, Raman spectroscopy on sulfur samples at high pressures is much easier to perform than IR spectroscopical studies due to technical demands (e.g., throughput of the IR beam, spectral range in the far-infrared). On the other hand, application of laser radiation for exciting the Raman spectrum may cause photo-induced structural changes. High-pressure phase transitions and structures of elemental sulfur at high pressures were already discussed in [1]. [Pg.82]

Methane-to-methanol conversion by gas-phase transition metal oxide cations has been extensively studied by experiment and theory see reviews by Schroder, Schwarz, and co-workers [18, 23, 134, 135] and by Metz [25, 136]. We have used photofragment spectroscopy to study the electronic spectroscopy of FeO" " [47, 137], NiO [25], and PtO [68], as well as the electronic and vibrational spectroscopy of intermediates of the FeO - - CH4 reaction. [45, 136] We have also used photoionization of FeO to characterize low lying, low spin electronic states of FeO [39]. Our results on the iron-containing molecules are presented in this section. [Pg.345]

Spin-state transitions have been studied by the application of numerous physical techniques such as the measurement of magnetic susceptibility, optical and vibrational spectroscopy, the Fe-Mbssbauer effect, EPR, NMR, and EXAFS spectroscopy, the measurement of heat capacity, and others. Most of these studies have been adequately reviewed. The somewhat older surveys [3, 19] cover the complete field of spin-state transitions. Several more recent review articles [20, 21, 22, 23, 24, 25] have been devoted exclusively to spin-state transitions in compounds of iron(II). Two reviews [26, 27] have considered inter alia the available theoretical models of spin-state transitions. Of particular interest is the determination of the X-ray crystal structures of spin transition compounds at two or more temperatures thus approaching the structures of the pure HS and LS electronic isomers. A recent survey [6] concentrates particularly on these studies. [Pg.58]

Remarkably, the photoelectron spectrum provides more than just the energy of the transition state. As can be seen in Figure 5.5, the spectrum also contains peaks corresponding to the transition state in excited vibrational levels, where the activated vibrations are orthogonal to the reaction coordinate. Therefore, NIPES can even be used to carry out vibrational spectroscopy of reaction transition states. [Pg.235]

The vibrational and rotational motions of the chemically bound constituents of matter have frequencies in the IR region. Industrial IR spectroscopy is concerned primarily with molecular vibrations, as transitions between individual rotational states can be measured only in IR spectra of small molecules in the gas phase. Rotational - vibrational transitions are analysed by quantum mechanics. To a first approximation, the vibrational frequency of a bond in the mid-IR can be treated as a simple harmonic oscillator by the following equation ... [Pg.311]

Vibrational spectroscopy measures and evaluates the characteristic energy transitions between vibrational or vibrational-rotational states of molecules and crystals. The measurements provide information about nature, amount and interactions of the molecules present in the probed substances. Different methods and measurement principles have been developed to record this vibrational information, amongst which IR and Raman spectroscopy are the most prominent. The following focuses on these two techniques, the corresponding instrumentation and selected applications. [Pg.118]

The next most useful is vibrational spectroscopy but identification of large molecules is still uncertain. In the laboratory, vibrational spectroscopy in the infrared (IR) is used routinely to identify the functional groups in organic molecules but although this is important information it is not sufficient to identify the molecule. Even in the fingerprint region where the low wavenumber floppy vibrational modes of big molecules are observed, this is hardly diagnostic of structure. On occasion, however, when the vibrational transition can be resolved rotationally then the analysis of the spectrum becomes more certain. [Pg.60]

The period under review has seen a small, but apparently real, decrease in the annual number of publications in the field of the vibrational spectroscopy of transition metal carbonyls. Perhaps more important, and not unrelated, has been the change in perspective of the subject over the last few years. Although it continues to be widely used, the emphasis has moved from the simple method of v(CO) vibrational analysis first proposed by Cotton and Kraihanzel2 which itself is derived from an earlier model4 to more accurate analyses. One of the attractions of the Cotton-Kraihanzel model is its economy of parameters, making it appropriate if under-determination is to be avoided. Two developments have changed this situation. Firstly, the widespread availability of Raman facilities has made observable frequencies which previously were either only indirectly or uncertainly available. Not unfrequently, however, these additional Raman data have been obtained from studies on crystalline samples, a procedure which, in view of the additional spectral features which can occur with crystalline solids (vide infra), must be regarded as questionable. The second source of new information has been studies on isotopically-labelled species. [Pg.116]

In ultraviolet and visible region, electronic transition of atoms and molecules are observed. This is why it is called electronic spectroscopy. In infrared region the absorption of radiation by an organic compound causes molecular vibrations and so it is called vibrational spectroscopy. [Pg.212]

A variety of anionic transition metal cyano-complexes have been intercalated in LDHs and their structure investigated by vibrational spectroscopy [161]. There is general agreement that octahedral complexes such as [Fe(CN)6] and [Fe(CN)6] intercalated in LDHs ahgn themselves with their three-fold axis perpendicular to the sheets, but the spectra are gen-... [Pg.33]

The earliest experiments with lasers in absorption spectroscopy were performed with the high-gain infrared line X = 3.39p of the He-Ne laser the first gas laser Several authors Miscovered that this laser line is absorbed by many hydrocarbon molecules, causing a vibrational-rotational transition in a band which belongs to the excitation of a C-H stretching vibration . ... [Pg.12]

Raman spectroscopy Is a form of vibrational spectroscopy which, like Infrared spectroscopy. Is sensitive to transitions between different vibrational energy levels in a molecule (1). It differs from Infrared spectroscopy In that Information Is derived from a light scattering rather than a direct absorption process. Furthermore, different selection rules govern the Intensity of the respective vibrational modes. Infrared absorptions are observed for vibrational modes which change the permanent dipole moment of the... [Pg.49]

Phase transitions can be studied by vibrational spectroscopy by means of changes of pressure or temperature. Other than the example of CaMo04 (198) given in Section 6.7. where a new phase was found at high pressure little is known for chalcogenometallates along this line of study. [Pg.104]

HOOKE S LAW SPRING KINETIC ISOTOPE EFFECT VIBRATIONAL COUPLING VIBRATIONAL REDISTRIBUTION VIBRATIONAL REAXATION VIBRATIONAL SPECTROSCOPY VIBRONIC TRANSITION VICINAL... [Pg.787]


See other pages where Vibrational transitions spectroscopy is mentioned: [Pg.2962]    [Pg.197]    [Pg.140]    [Pg.115]    [Pg.334]    [Pg.336]    [Pg.339]    [Pg.347]    [Pg.354]    [Pg.364]    [Pg.368]    [Pg.102]    [Pg.87]    [Pg.213]    [Pg.278]    [Pg.62]    [Pg.195]    [Pg.507]    [Pg.13]    [Pg.121]    [Pg.40]    [Pg.79]    [Pg.195]    [Pg.202]    [Pg.319]    [Pg.408]    [Pg.497]    [Pg.65]    [Pg.277]   
See also in sourсe #XX -- [ Pg.228 ]




SEARCH



Spectroscopy of vibrational transitions

Transition metal compounds, vibrational spectroscopy

Vibration /vibrations spectroscopy

Vibrational spectroscopy energy level transitions

Vibrational spectroscopy transition metal carbonyl complexes

Vibrational spectroscopy, transition metal

© 2024 chempedia.info