Vibrational spectroscopy, transition metal

One of the most valuable techniques available to any kind of spectroscopist is that of isotopic substitution. This paper will discuss a few applications of the method to problems in the optical spectroscopy of atoms, diatomic and small polyatomic molecules, the vibrations of transition metal ccmplexes, hydrogen bonding, solvation, and optical activity. We shall, not treat either magnetic resonance or microwave spectroscopy. 

Raman spectroscopy has provided information on catalytically active transition metal oxide species (e. g. V, Nb, Cr, Mo, W, and Re) present on the surface of different oxide supports (e.g. alumina, titania, zirconia, niobia, and silica). The structures of the surface metal oxide species were reflected in the terminal M=0 and bridging M-O-M vibrations. The location of the surface metal oxide species on the oxide supports was determined by monitoring the specific surface hydroxyls of the support that were being titrated. The surface coverage of the metal oxide species on the oxide supports could be quantitatively obtained, because at monolayer coverage all the reactive surface hydroxyls were titrated and additional metal oxide resulted in the formation of crystalline metal oxide particles. The nature of surface Lewis and Bronsted acid sites in supported metal oxide catalysts has been determined by adsorbing probe mole-... 

Methane-to-methanol conversion by gas-phase transition metal oxide cations has been extensively studied by experiment and theory see reviews by Schroder, Schwarz, and co-workers [18, 23, 134, 135] and by Metz [25, 136]. We have used photofragment spectroscopy to study the electronic spectroscopy of FeO" " [47, 137], NiO [25], and PtO [68], as well as the electronic and vibrational spectroscopy of intermediates of the FeO - - CH4 reaction. [45, 136] We have also used photoionization of FeO to characterize low lying, low spin electronic states of FeO [39]. Our results on the iron-containing molecules are presented in this section. 

Tian ZQ, Ren B, Mao BW. 1997. Extending surface Raman spectroscopy to transition metal surfaces for practical applications. 1. Vibrational properties of thiocyanate and carbon monoxide adsorbed on electrochemically activated platinum surfaces. J Phys Chem B 101 1338-1346. 

Conclusions. Time-resolved CO laser absorption spectroscopy can provide information useful in characterizing the primary photochemical channels in gas-phase transition metal carbonyls. We have found that product vibrational energy distributions indicate that W(CO)g and Cr(CO>6 dissociate via different... 

The period under review has seen a small, but apparently real, decrease in the annual number of publications in the field of the vibrational spectroscopy of transition metal carbonyls. Perhaps more important, and not unrelated, has been the change in perspective of the subject over the last few years. Although it continues to be widely used, the emphasis has moved from the simple method of v(CO) vibrational analysis first proposed by Cotton and Kraihanzel2 which itself is derived from an earlier model4 to more accurate analyses. One of the attractions of the Cotton-Kraihanzel model is its economy of parameters, making it appropriate if under-determination is to be avoided. Two developments have changed this situation. Firstly, the widespread availability of Raman facilities has made observable frequencies which previously were either only indirectly or uncertainly available. Not unfrequently, however, these additional Raman data have been obtained from studies on crystalline samples, a procedure which, in view of the additional spectral features which can occur with crystalline solids (vide infra), must be regarded as questionable. The second source of new information has been studies on isotopically-labelled species. 

Fourier-transform infrared (FTIR) spectroscopy Spectroscopy based on excitation of vibrational modes of chemical bonds in a molecule. The energy of the infrared radiation absorbed is expressed in inverse centimeters (cm ), which represents a frequency unit. For transition-metal complexes, the ligands -C N and -C=0 have characteristic absorption bands at unusually high frequencies, so that they are easily distinguished from other bonds. The position of these bonds depends on the distribution of electron density between the metal and the ligand an increase of charge density at the metal results in a shift of the bands to lower frequencies. 

A variety of anionic transition metal cyano-complexes have been intercalated in LDHs and their structure investigated by vibrational spectroscopy [161]. There is general agreement that octahedral complexes such as [Fe(CN)6] and [Fe(CN)6] intercalated in LDHs ahgn themselves with their three-fold axis perpendicular to the sheets, but the spectra are gen-... 

The interaction of N2 with transition metals is quite complex. The dissociation is generally very exothermic, with many molecular adsorption wells, both oriented normal and parallel to the surface and at different sites on the surface existing prior to dissociation. Most of these, however, are only metastable. Both vertically adsorbed (y+) and parallel adsorption states (y) have been observed in vibrational spectroscopy for N2 adsorbed on W(100), and the parallel states are the ones known to ultimately dissociate [335]. The dissociation of N2 on W(100) has been well studied by molecular beam techniques [336-339] and these studies exemplify the complexity of the interaction. S(Et. 0n Ts) for this system [339] in Figure 3.36 (a) is interpreted as evidence for two distinct dissociation mechanisms a precursor-mediated one at low E and Ts and a direct activated process at higher These results are similar to those of Figure 3.35 for 02/ Pt(lll), except that there is no Ts... 

Vibrational Spectroscopy of Hydride-Bridged Transition Metal Compounds... 

Infrared data have been tabulated for benzotriazole and a wide range of its transition metal complexes or adducts (172). Far infrared spectra have been recorded for copper(II) benzotriazole adducts and bands at 270-320 cm-1 have been assigned to Cu-N vibrations (172). Infrared absorptions at approximately 825, 800, and 775 cm-1 in the spectra of cobalt(III)/4,5-disubstituted triazolate complexes have been attributed to triazolate ring vibrations (109). Infrared data have been reported and assignments made for palladium and platinum thiatriazoline-5-thionate complexes (37) and for the parent thione (127). Vibrational spectroscopy has been employed in an attempt to determine coordination sites for a range of 8-azapurine complexes (108). 

NMR is a widely used and important technique for molecular structure determination as applied to bulk materials, where it competes, often advantageously, with vibrational spectroscopy. However, a lack of sensitivity has limited its application to the study of adsorption on high-area finely divided surfaces. Also, certain metals with bulk magnetic properties—e.g., Fe, Co, and Ni (but not the other group Vlll transition metals)—cannot be studied by the technique as their magnetism causes very broad and weak resonances from adsorbed species. 

The cross-section in Eq. (1 illustrates another distinguishing feature of inelastic neutron scattering for vibrational spectroscopy, i.e., the absence of dipole and polarizability selection rules. In contrast, it is believed that in optical and inelastic electron surface spectroscopies that a vibrating molecule must possess a net component of a static or induced dipole moment perpendicular to a metal surface in order for the vibrational transition to be observed ( 7,8). This is because dipole moment changes of the vibrating molecule parallel to the surface are canceled by an equal image moment induced in the metal. 

Although not exhaustive, the above summary of experiments with hydrogen chemisorbed on transition-metals serves to illustrate how neutron vibrational spectroscopy is performed with catalytic substrates and the methods used to analyze the inelastic neutron spectra. In concluding this section we note that the technique can be extended to supported catalysts such as in recent experiments with hydrogen adsorbed on both MoS and alumina supported MoSp (38). Also, as another indication of the variety of systems which can be studied, we note earlier experiments with ethylene (39) and acetylene (40) adsorbed on silver exchanged 13X zeolites. "Tn this work, deuteration of the molecules was helpful in identifying the surface vibratory modes on these ionic substrates of greater complexity. 

---