Uranium nuclear fission

Technetium then became available in a weighable quantity because of uranium nuclear fission leading to the production of "Tc in nuclear reactors. The total amount of "Tc in the world at the end of 1993 is estimated to be 78 tons, more abundant than rhenium on the earth. 

Uranium is converted by CIF, BiF, and BrP to UF. The recovery of uranium from irradiated fuels has been the subject of numerous and extensive investigations sponsored by atomic energy agencies in a number of countries (55—63). The fluorides of the nuclear fission products are nonvolatile hence the volatile UF can be removed by distiUation (see Nuclearreactors Uraniumand uranium compounds). 

Economic Aspects. The principal market for deuterium has been as a moderator for nuclear fission reactors fueled by unenriched uranium. The decline in nuclear reactor constmetion has sharply reduced the demand for heavy water. The United States has stopped large-scale production of D2O, and Canada is the only suppHer of heavy water at this time. Heavy water is priced as a fine chemical, and its price is not subject to market forces. 

The only large-scale use of deuterium in industry is as a moderator, in the form of D2O, for nuclear reactors. Because of its favorable slowing-down properties and its small capture cross section for neutrons, deuterium moderation permits the use of uranium containing the natural abundance of uranium-235, thus avoiding an isotope enrichment step in the preparation of reactor fuel. Heavy water-moderated thermal neutron reactors fueled with uranium-233 and surrounded with a natural thorium blanket offer the prospect of successful fuel breeding, ie, production of greater amounts of (by neutron capture in thorium) than are consumed by nuclear fission in the operation of the reactor. The advantages of heavy water-moderated reactors are difficult to assess. 

Production in Fission of Heavy Elements. Tritium is produced as a minor product of nuclear fission (47). The yield of tritium is one to two atoms in 10,000 fissions of natural uranium, enriched uranium, or a mixture of transuranium nucHdes (see Actinides and transactinides Uranium). 

In 1938 Niels Bohr had brought the astounding news from Europe that the radiochemists Otto Hahn and Fritz Strassmann in Berlin had conclusively demonstrated that one of the products of the bom-bardmeiit of uranium by neutrons was barium, with atomic number 56, in the middle of the periodic table of elements. He also announced that in Stockholm Lise Meitner and her nephew Otto Frisch had proposed a theory to explain what they called nuclear fission, the splitting of a uranium nucleus under neutron bombardment into two pieces, each with a mass roughly equal to half the mass of the uranium nucleus. The products of Fermi s neutron bombardment of uranium back in Rome had therefore not been transuranic elements, but radioactive isotopes of known elements from the middle of the periodic table. 

Wlieii very heavy nuclei, such as those of uranium and plutonium, are split into lighter nuclei having less total mass than the very heavy nuclei, energy is released. The process is called nuclear fission. In either nuclear fission or nuclear fusion, much of the convened rest energy emerges as kinetic energy, heat, and light. 

At the end of 1938, Hahn sent her a description of his experiments on the interaction of neutrons with uranium. He and a young chemist. Fritz Strasstnan. had detennined that one of the reaction products was clearly barium. Meitner was so excited about this that she showed Hahn s letter to her nephew, physicist Otto Frisch. Their discussions on the topic gave birth to the idea of nuclear fission. 

Nuclear fission is also involved in nuclear weapons. To create a bomb, the concentration of the isotope uranium-235 must be increased to at least 85 percent from its natural concenti ation of only 0.7 percent. This increase ot concentration is difficult and expensive. In a typical nuclear reactor the uranium-235 concentration in the fuel is only 3 to 4 percent, and hence a nuclear reactor cannot explode like a bomb. In a nuclear bomb... 

Nuclear fission is a process in which a heavy nucleus—usually one with a nucleon number of two hundred or more—separates into two nuclei. Usually the division liberates neutrons and electromagnetic radiation and releases a substantial amount of energy. The discoveiyi of nuclear fission is credited to Otto I lahn and Fritz Strassman. In the process of bombarding uranium with neutrons in the late 1930s, they detected several nuclear products of significantly smaller mass than uranium, one of which was identified as Ba. The theorectical underpinnings that exist to this day for nuclear fission were proposed by Lise Meitner and Otto Frisch. Shortly after Hahn and Strassman s discovery. 

Some nuclear fission reactors are designed to use natural uranium having 0.7 percent and 99.3 percent CANDU reactors, manufactured in... 

Canada, are examples. These reactors do not use ordinai y water for the moderator. Most nuclear fission reactors use ordinaiy water for a moderator which requires that the fuel he about 3 percent and about 97 percent U. Achieving this enrichment requires that the solid uranium compounds in the yellow cake be converted to gaseous uranium hexafluoride (UF,). Following enrichment, gaseous UF is converted to solid uranium oxide (UO,) for fabrication of fuel elements for a nuclear reactor. 

Uranium-235 and U-238 behave differently in the presence of a controlled nuclear reaction. Uranium-235 is naturally fissile. A fissile element is one that splits when bombarded by a neutron during a controlled process of nuclear fission (like that which occurs in a nuclear reactor). Uranium-235 is the only naturally fissile isotope of uranium. Uranium-238 is fertile. A fertile element is one that is not itself fissile, but one that can produce a fissile element. When a U-238 atom is struck by a neutron, it likely will absorb the neutron to form U-239. Through spontaneous radioactive decay, the U-239 will turn into plutonium (Pu-239). This new isotope of plutonium is fissile, and if struck by a neutron, will likely split. 

For nuclear fission to result in a chain reaction, the sample must be large enough so that most of the neutrons are captured internally. If the sample is too small, most of the neutrons escape, breaking the chain. The critical mass of uranium-235 required to maintain a chain reaction in a bomb appears to be about 1 to 10 kg. In the bomb dropped on Hiroshima, the critical mass was achieved by using a conventional explosive to fire one piece of uranium-235 into another. 

When the Plutonium Project was established early in 1942, for the purpose of producing plutonium via the nuclear chain reaction in uranium in sufficient quantities for its use as a nuclear explosive, we were given the challenge of developing a chemical method for separating and isolating it from the uranium and fission products. We had already conceived the principle of the oxidation-reduction cycle, which became the basis for such a separations process. This principle applied to any process involving the use of a substance which carried plutonium in one of its oxidation states but not in another. By use of this... 

Induced nuclear fission is fission caused by bombarding a heavy nucleus with neutrons (Fig. 17.23). The nucleus breaks into two fragments when struck by a projectile. Nuclei that can undergo induced fission are called fissionable. For most nuclei, fission takes place only if the impinging neutrons travel so rapidly that they can smash into the nucleus and drive it apart with the shock of impact uranium-238 undergoes fission in this way. Fissile nuclei, however, are nuclei that can be nudged into breaking apart even by slow neutrons. They include uranium-235, uranium-233, and plutonium-239—the fuels of nuclear power plants. 

Once nuclear fission has been induced, it can continue, even if the supply of neutrons from outside is discontinued, provided that the fission produces more neutrons. Such self-sustaining fission takes place in uranium-235, which undergoes numerous fission processes, including... 

Fluidized-bed CVD was developed in the late 1950s for a specific application the coating of nuclear-fuel particles for high temperature gas-cooled reactors. PI The particles are uranium-thorium carbide coated with pyrolytic carbon and silicon carbide for the purpose of containing the products of nuclear fission. The carbon is obtained from the decomposition of propane (C3H8) or propylene... 

Nuclear fuel reprocessing was first undertaken with the sole purpose of recovering plutonium, for weapons use, from uranium irradiated in nuclear reactors. These reactors, called the production reactors, were dedicated to transmuting as much of the uranium as possible to plutonium. From its original scope of recovering exclusively plutonium, with no attempts to either recover or recycle uranium, nuclear fuel reprocessing has since grown into a much more sophisticated and complex operation with expanded scope. It is now called upon to separate uranium and plutonium from the fission products, and to purify these elements to levels at which these fissile materials can be conveniently recycled for reuse. The present scope also extends to fission products separation and concentration. 

The development of chemistry itself has progressed significantly by analytical findings over several centuries. Fundamental knowledge of general chemistry is based on analytical studies, the laws of simple and multiple proportions as well as the law of mass action. Most of the chemical elements have been discovered by the application of analytical chemistry, at first by means of chemical methods, but in the last 150 years mainly by physical methods. Especially spectacular were the spectroscopic discoveries of rubidium and caesium by Bunsen and Kirchhoff, indium by Reich and Richter, helium by Janssen, Lockyer, and Frankland, and rhenium by Noddack and Tacke. Also, nuclear fission became evident as Hahn and Strassmann carefully analyzed the products of neutron-bombarded uranium. 

Purex [Plutonium and uranium recovery by extraction] A process for the solvent extraction of plutonium from solutions of uranium and fission products, obtained by dissolving spent nuclear fuel elements in nitric acid. The solvent is tri-n-butyl phosphate (TBP) in... 

---