Ultrasonic vibration acoustic wave detection

Due to their high sensitivity to strain, temperature variation, vibration, and acoustic waves, embedded extrinsic Fabry-Perot interferometric optical fiber sensors have been developed to detect delamination, based on changes in the acoustic properties of the materials before and after delamination [41]. Impact events and corrosion cracking generate ultrasonic waves, which can be characterized using elliptical core fiber sensors [40]. The in-line Fabry-Perot interferometer seems well suited for the local detection of shear waves and the characterization of impact-induced damage. 

Ultrasonic vibration potential (UVP), an electro-acoustical method involving detection of the alternating electric field (potential or current) generated when dispersed species are made to move by imposed sound waves (Figure 4.8). This technique is also referred to as colloid vibration potential (CVP) or colloid vibration current (CVC). 

Because electrophoresis uses optical detection, this technique is limited to the analysis of dilute systems however, the recent development of electroacoustic methods has extended analysis to concentrated slurries containing up to 50% vol/vol solids [73], The electroacoustic effect is the response of charged particles to an applied alternating electrical or acoustical field [74], in contrast to the static field employed in electrophoresis. The acoustical response results from relative vibratory motion between particle and medium if the two phases differ in density. If an alternating electrical field is applied, charged particles vibrate in a back-and-forth motion in phase with the applied field, producing a sound wave whose pressure amplitude is proportional to the particle mobility and This technique is termed electrokinetic sonic amplitude (ESA). Alternatively, if an ultrasonic wave is applied, the particles vibrate at the sound... 

---