2,2,2-trifluoroethyl

Chemically, 2,2,2-trifluoroethanol behaves as a typical alcohol. It can be converted to trifluoroacetaldehyde [75-90-1] or trifluoroacetic acid [76-05-1] by various oxidi2iag agents such as aqueous chlorine solutions (51) or oxygen ia the preseace of a vanadium pentoxide catalyst (52). Under basic conditions, it adds to tetrafluoroethylene and acetylene to give, respectively, 1,1,2,2-tetrafluoroethyl 2/2/2 -trifluoroethyl ether [406-78-0] (53) and... 

Trifluoroethanol is also the starting material for the anesthetic Isoflurane (l-chloro-2,2,2-trifluoroethyl difluoromethyl ether [26675-46-7]) (55,56) and Desflurane (2-difluoromethoxy-l,l,l,2-tetrafluoroethane [57041-67-5]) (57). 

Xenon difluoride is used to prepare methyliodine difluoride from methyl iodide [102, 128] as well as to convert miscellaneous aryl [103, 129, 110] heptafluorapropyl [129], and 2,2,2-trifluoroethyl [103] iodides to the corresponding organo iodine difluorides in yields ranging from 60 to 100% Elemental fluorine transforms aryl iodides to their corresponding aryliodine difluoride turn pounds [131 132], which are known to add fluorine to alkenes ]133] (equation 21)... 

Condensation of sodium phenoxide witli 2,2,2-trifluoroethyl iodide gives a product of direct substitution in a low yield, several other ethers are formed by eliminatton-addition reactions [7] Use of mesylate as a leaving group and hex amethyl phosphoramide (HMPA) as a solvent increases the yield of the substitution [S] Even chlorine can be replaced when the condensation is performed with potassium fluoride and acetic acid at a high temperature [9] (equations 6-8)... 

Trifluoromethyl thiirane is formed by the action of tris(diethylamino)-phosphineon l-chloromethyl-2,2,2-trifluoroethyldisulfide [S2] (equation 73) Difluoromethyl phenyl selenide is prepared by treatment of lithium phenyl-selemde with chlorodifluoroniethane via a carbene mechanism [Si] (equation 44) Bis(2,2,2-trifluoroethyl)diselenide is formed in the reaction of 2,2,2-trifluoroethyl mesylate with lithium diselenide [84] (equation 74). 

The synthesis and condensation reactions of 2,2,2-trifluoroethyl vinyl ketone with enamines and ketones were investigated [57J (equation 38) (Table 13). These reactions lead to the formation of 2-trifluoromethylcyclohexenones. 

Bis(2,2,2-trifluoroethyl)]phosphite can be used to prepaie esters of phos phorous acid by a transestenfication reaction with alcohols and phenols [750] (equation 78)... 

In the preparation of the thiazides containing more highly functionalized side chains (183-185), an acetal of the aldehyde is usually used rather than the free carbonyl compound. Thus, trichlomethiazide (183) is prepared by reaction of 160 with the dimethyl acetal from dichloroacetaldehyde. In a similar vein, alkylation of the acetalthiol, 190, with allyl bromide affords 191. This yields altizide (184) on condensation with 160. Alkylation of 190 with 2,2,2-trifluoroethyl iodide gives 192. This leads to epithiazide (185) on condensation with 160. 

The crude product was washed successively with concentrated HCI, 62% HjSO, concentrated HjSO and 5% NaOH solution. It was dehydrated over a drying agent and then refractionated in a still. 20 parts of bis(2,2,2-trifluoroethyl) ether were recovered (BP 62.5° to 63.5°C). 

Therapeutic Function Inhalation anesthetic Chemical Name (2,2,2-trlfluoroethoxy)ethene Common Name 2,2,2-trifluoroethyl vinyl ether Structural Formula CF3CH20CH=CH2 Chemical Abstracts Registry No. 406-90-6... 

The reaction mixture comprising 2,2,2-trifluoroethyl vinyl ether, 2,2,2-trifluoroethanol and potassium 2,2,2-trifluoroethylate was fractionally distilled, whereupon crude 2,2,2-trifluoroethyl vinyl ether was obtained which boiled at 42° to 45°C at 760 mm. More 2,2,2-trifluoroethyl vinyl ether was obtained when the distillation residue was returned to the bomb and reacted with acetylene in the same manner as hereinabove described. 

The alkali metal hydroxides, instead of the alkali metals per se, can be employed to produce the alkali metal 2,2,2-trifluoroethanolate. However, this introduces water in the reaction mixture which requires removal prior to vinylation with acetylene. The crude products, on further distillation, yielded 2,2,2-trifluoroethyl vinyl ether having a boiling point of 43.1°C at 759 mm. 

Prepares solution of sodium methylate by dissolving 3.9 g of sodium metal in 500 ml of methanol. Add 39.0 g of 7-chloro-1,3-dihydro-5-phenyl-2H-1,4-benzodiazeplne-2-one. Evaporate the reaction mixture to a residue and dissolve the residue in 170 ml of dimethylformamide. Add 30 g of 2,2,2-trifluoroethyl Iodide and stir at room temperature for Vi hour, then heat to 60°C to 70°C for an additional 7 hours. Add 19 g of 2,2,2-trifluoroethyl iodide and resume the heating and stirring at 60°C to 70°C for an additional 16 hours. Filter off the solids and evaporate the filtrate to a residue in vacuo. Triturate the residue with water and extract with ethyl ether. Wash the ethereal extract with water, dry over anhydrous sodium sulfate and evaporate the solvent to a residue. 

Chemical Name 1 -Chloro-2 2 2-trifluoroethyl difluoromethyl ether Common Name —... 

C) Preparation of 2-Methyl-3-(2,2,2-Trifluoroethyl)Thiomethyl-6-Chloro-7-Sulfamyl-3,4-Dihydro-1,2,4-Benzothiadiazine-1,1-Dioxide To 4.6 g (0.015 mol) of 4-amino-2-chloro-5-(methylsulfamyl)benzenesulfonamide in 30 ml of the dimethyl ether of ethylene glycol is added 4.08 g (0.02 mol) of 2,2,2-trifluoroethylmercaptoacetaldehyde dimethylacetal followed by 1 ml of ethyl acetate saturated with hydrogen chloride gas. The resulting solution is refluxed for 1.5 hours, cooled and then slowly added to cold water dropwise with stirring. The crude product is filtered, dried and recrystallized from isopropanol (3.2 g), MP 202° to 202.5°C. A second recrystallization from isopropanol raised the MP to 202°... 

DKR of esters bearing an electron-withdrawing group at the ot-carbon can be performed easily under mild reaction conditions due to the low pKa of the oc-proton. Tsai et al. have reported an efficient DKR of rac-2,2,2-trifluoroethyl ot-chorophenyl acetate in water-saturated isooctane [40]. They used lipase MY from C. rugosa for the KR and trioctylamine as the base for racemization. (R)-chlorophenylacetic acid was obtained in 93% yield and 89.5% ee (Figure 4.15). 

Figure 6.16 Enantioselective transesterification of N-Cbz-amino acid 2,2,2-trifluoroethyl esters.

Other important derivatives for the preparation of (i-aminoacids are the corresponding P-aminonitriles. Lipase-catalyzed N-acylations of racemic cis-2-aminocyclopentane and cyclohexane carbonitriles with 2,2,2-trifluoroethyl butanoate have been successfully carried out in organic solvents and ionic liquids [53], PSL yielding better results than CALB (Scheme 7.29). 

Recently, a very interesting preparation of P-peptides has been carried out by Kanerva and coworkers through a two-step lipase-catalyzed reactions in which N-acetylated P-amino esters were first activated as 2,2,2-trifluoroethyl esters with CALB [55]. The activated esters were then used to react with a P-aminoester in the presence of CALA in dry diethylether or diisopropylether (Scheme 7.31). In this peptide synthesis, the aminoester was used in excess and the unreacted counterpart was easily separated and later recyded. 

CN 6-chloro-3,4-dihydro-3-[((2,2,2-trifluoroethyl)thio]methyl]-2H-l,2,4-benzothiadiazinc-7-sulfonamide... 

CN 7-chloro-5-(2-fluorophenyl)-l,3-dihydro-l-(2,2,2-trifluoroethyl)-27/-l,4-benzodiazepine-2-thione... 

---