Transparency performance

Develop transparent performance measures for procurement—roll out trial to all contracts and focus on ... 

Atr—ftir can be readily performed on most commercial ftir spectrometers through the use of an attachment for atr spectroscopy. These devices provide ir-transparent internal reflection elements that are typically made of Ge, KRS-5, ZnSe, or ZnS. These internal reflection elements are made of materials that are of extremely high purity to avoid losses from absorption by impurities in these devices. Coupling of a thin film or surface sample to one of these reflection elements is accompHshed by pressing the sample against the element while acquiring the spectmm. 

Cera.micA.bla.tors, Several types of subliming or melting ceramic ablators have been used or considered for use in dielectric appHcations particularly with quartz or boron nitride [10043-11 -5] fiber reinforcements to form a nonconductive char. Fused siHca is available in both nonporous (optically transparent) and porous (sHp cast) forms. Ford Aerospace manufactures a 3D siHca-fiber-reinforced composite densified with coUoidal siHca (37). The material, designated AS-3DX, demonstrates improved mechanical toughness compared to monolithic ceramics. Other dielectric ceramic composites have been used with performance improvements over monolithic ceramics (see COMPOSITE MATERIALS, CERAMIC MATRIX). 

Water—Glycol Solutions. These materials are transparent solutions of water and glycol having good low temperature properties. They frequently contain water-soluble additives to improve performance in corrosion resistance, anti-wear, etc. A water-soluble polymer is commonly utilized to boost viscosity. As solutions their advantage over emulsions is their inherent stabdity. 

The unusual resiHence of ionomers combined with ease of processing have resulted in widespread replacement of balata mbber as golf-ball covers. In order to obtain desirable backspin characteristics, low glass-transition ionomer compositions have been developed (10). Transparent coatings on bowling pins promote both longer life and improved playing performance. 

It is used in high grade industrial paints and, in combination with high performance pigments, in automotive finishes. The transparent type which is tinctoriaHy strong finds appHcations in a variety of printing inks. 

Cycloahphatic diamines which have reacted with diacids to form polyamides generate performance polymers whose physical properties are dependent on the diamine geometric isomers. (58,74). Proprietary transparent thermoplastic polyadipamides have been optimized by selecting the proper mixtures of PDCHA geometric isomers (32—34) for incorporation (75) ... 

It would be incomplete for any discussion of soap crystal phase properties to ignore the colloidal aspects of soap and its impact. At room temperature, the soap—water phase diagram suggests that the soap crystals should be surrounded by an isotropic Hquid phase. The colloidal properties are defined by the size, geometry, and interconnectiviness of the soap crystals. Correlations between the coUoid stmcture of the soap bar and the performance of the product are somewhat quaUtative, as there is tittle hard data presented in the literature. However, it might be anticipated that smaller crystals would lead to a softer product. Furthermore, these smaller crystals might also be expected to dissolve more readily, leading to more lather. Translucent and transparent products rely on the formation of extremely small crystals to impart optical clarity. 

Absorbance. Analyte measurements in clinical analyzers using Hquid reagents are most commonly performed by transmission of light, ie, by absorbance photometry or colorimetry (Fig. 3a). The Hquid to be analyzed is either held in a cuvette or passed through a flowceU having transparent walls. 

Optical Coatings. Thin surface coatings are appHed to optical components to improve performance. Wideband antireflection coatings for the visible and ir regions need materials with a refractive iadex of for the best efficieacy. Cerium fluoride, a stable material resistant to humidity damage, has a suitable iadex, 1.63 ia the visible, 1.59 ia the iafrared, and is transparent over the range 0.5 p.m to 5 p.m. It is one of the compounds used to build up the multilayers deposited on lenses, sensors, and the like. 

These universal concentrates are preferred if they can be used, because inventorying costs can be reduced it is not necessary to stock different concentrates for different colorants. In some performance polymers this concept is not appHcable because the universal vehicles have a negative effect on weathering, transparency, or processing performance. 

The development vehicle used to create and test the rule base must be as flexible as possible, allowing easy alterations and expansion of the rule base with whatever displays can convey the most information. The delivery vehicle, however, should be virtually transparent to the user, conveying only as much information as needed to solve the problem at hand. Self-tuning controllers can perform their task without explicitlv informing users, but their output and status is available on demanci, and their operation may be easily limited or interrupted. 

All three techniques probe 500 A to 1 pm or so in depth for opaque materials, depending on the penetration depth of the incident light. For transparent materials, essentially bulk properties are measured by PL and Modulation Spectroscopy. All three techniques can be performed in ambient atmosphere, since visible light is used both as incident probe and signal. 

TRANSPARENT FLOW GATING INTERFACE WITH PACKED CAPILLARY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY-CAPILLARY ZONE ELECTROPHORESIS... 

The materials used as the electron and hole injecting electrodes play a crucial role in the overall performance of the device and therefore cannot be neglected even in a brief review of the materials used in OLEDs. The primary requirements for the function of the electrodes is that the work function of the cathode be sufficiently low and that of the anode sufficiently high, to enable good injection of electrons and holes, respectively. In addition, at least one electrode must be sufficiently transparent to permit the exit of light from the organic layer. 

---