Toxic fire products, generation

Fire Hazards - Flash Point (deg. F) 425 OC Flammable Limits in Air (%) Not pertinent Fire Extinguishing Agents Carbon dioxide or dry chemical Fire Extinguishing Agents Not to be Used Not pertinent Special Hazards of Combustion Products Toxic vapors are generated when heated Behavior in Fire Solid melts and burns Ignition Temperature Data not available Electrical Hazard Not pertinent Burning Rate Not pertinent. 

Fire Resistant Elastomers. The poly(aryloxyphosphazene) elastomers offer excellent fire resistance without incorporating halogen in the polymer or as an additive. These polymers are self-extinguishing in air and generate only moderate non-corrosive smoke and a minimum of toxic combustion products upon combustion (50-53). The poly(aryloxyphosphazene) elastomers (APN ) have excellent potential for applications such as... 

The carbon black generated by a fire from a rubber source increases the smoke density other products are highly toxic and often corrosive. The halogens, phosphates, borates, and their acids evolved during a fire corrode metals and electrical and electronic equipment. Hence many of the fire retardants described below cannot be used in situations where the toxic gases evolved will create their own hazards. In these cases inorganic hydroxides are used, at filler-type addition levels. Aluminium hydroxide and magnesium hydroxide are used as non-toxic fire retardant systems. 

Techniques are available to quantify the generation of smoke, toxic and corrosive fire products using the NBS Smoke Chamber (15), pyrolysis-gas chromatography/mass spectrometry (PY-GC-MS) (J 6), FMRC Flammability Apparatus (2,3,5,17,18), OSU Heat Release Rate Apparatus (13) and the NIST Cone Calorimeter (JJO. Techniques are also available to assess generation of 1) toxic compounds in terms of animal response (19), and 2) corrosive compounds in terms of metal corrosion (J 7). In the study, FMRC techniques and AMTL PY-GC-MS techniques were used. 

Generation of Smoke, Toxic and Corrosive Fire Products. Smoke, toxic and corrosive products are generated in fires as a result of vaporization, decomposition and combustion of materials in the presence or absence of air. 

---