Toluene, 2-hydroxylation

Formaldehyde (HCHO) FORM Toluene-hydroxyl radical adduct T02... 

Formation and Conversion of Arenium Ions An example is the scheme of the toluene hydroxylation ... 

The high fraction of ortho-isomer in the toluene hydroxylation product as compared with para-isomer is due to orbital control (Cj + C2 > C3 + c ) at the initial binding of the hydroxylating agent. The reversed ratio of the formed ortho- and para-isomers in passing from toluene to fluorobenzene accounts for the difference of the thermodynamic and the charge factors for the reactions of these compounds. 

Batch operation to synthesis of DHCD reqnires the supply of a biocatalyst, that is, a strain as the enzyme source, oxygen or air, and an aromatic reactant. Attention should be paid to the supply of the aromatic reactant since the aromatic reactant has damaging effects on microbial cells, and thns cannot be added to the reactor in too great an amount at one time. A detailed stndy of toluene hydroxylation kinetics (Woodley et al. 1991) showed that the aqneous toluene concentration should be... 

Diols that bear two hydroxyl groups m a 1 2 or 1 3 relationship to each other yield cyclic acetals on reaction with either aldehydes or ketones The five membered cyclic acetals derived from ethylene glycol (12 ethanediol) are the most commonly encoun tered examples Often the position of equilibrium is made more favorable by removing the water formed m the reaction by azeotropic distillation with benzene or toluene... 

An old name for benzene was phene and its hydroxyl derivative came to be called phe nol This like many other entrenched common names is an acceptable lUPAC name Likewise o m and p cresol are acceptable names for the various ring substituted hydroxyl derivatives of toluene More highly substituted compounds are named as deriv atives of phenol Numbering of the ring begins at the hydroxyl substituted carbon and proceeds m the direction that gives the lower number to the next substituted carbon Sub stituents are cited m alphabetical order... 

Commonly used isocyanates are toluene dhsocyanate, methylene diphenyl isocyanate, and polymeric isocyanates. Polyols used are macroglycols based on either polyester or polyether. The former [poly(ethylene phthalate) or poly(ethylene 1,6-hexanedioate)] have hydroxyl groups that are free to react with the isocyanate. Most flexible foam is made from 80/20 toluene dhsocyanate (which refers to the ratio of 2,4-toluene dhsocyanate to 2,6-toluene dhsocyanate). High-resilience foam contains about 80% 80/20 toluene dhsocyanate and 20% poly(methylene diphenyl isocyanate), while semi-flexible foam is almost always 100% poly(methylene diphenyl isocyanate). Much of the latter reacts by trimerization to form isocyanurate rings. 

Bis (trimethyl silyl) peroxide (CH2)3SiOOSi(CH2)3 can be used with triflic acid (CF SO H) and acts as an effective hydroxylating agent of aromatics such as toluene, mesitylene and naphthalene (165). Sodium perborate (a safe and inexpensive commercial chemical) can be used in conjunction with the triflic acid to hydroxylate aromatics (166). 

Neopentyl glycol, or 2,2-dimethyl-1,3-propanediol [126-30-7] (1) is a white crystalline soHd at room temperature, soluble ia water, alcohols, ethers, ketones, and toluene but relatively iasoluble ia alkanes (1). Two primary hydroxyl groups are provided by the 1,3-diol stmcture, making this glycol highly reactive as a chemical intermediate. The gem-A methy configuration is responsible for the exceptional hydrolytic, thermal, and uv stabiUty of neopentyl glycol derivatives. 

Synthetic phenol capacity in the United States was reported to be ca 1.6 x 10 t/yr in 1989 (206), almost completely based on the cumene process (see Cumene Phenol). Some synthetic phenol [108-95-2] is made from toluene by a process developed by The Dow Chemical Company (2,299—301). Toluene [108-88-3] is oxidized to benzoic acid in a conventional LPO process. Liquid-phase oxidative decarboxylation with a copper-containing catalyst gives phenol in high yield (2,299—304). The phenoHc hydroxyl group is located ortho to the position previously occupied by the carboxyl group of benzoic acid (2,299,301,305). This provides a means to produce meta-substituted phenols otherwise difficult to make (2,306). VPOs for the oxidative decarboxylation of benzoic acid have also been reported (2,307—309). Although the mechanism appears to be similar to the LPO scheme (309), the VPO reaction is reported not to work for toluic acids (310). 

Polyethers prepared from propylene oxide are soluble in most organic solvents. The products with the highest hydroxyl number (lowest molecular weight) are soluble in water, not in nonpolar solvents such as hexane. The solubihty of 3000 molecular weight triols is high enough in solvents such as toluene, hexane, and methylene chloride that the triols can be purified by a solvent extraction process. 

Production is by the acetylation of 4-aminophenol. This can be achieved with acetic acid and acetic anhydride at 80°C (191), with acetic acid anhydride in pyridine at 100°C (192), with acetyl chloride and pyridine in toluene at 60°C (193), or by the action of ketene in alcohoHc suspension. 4-Hydroxyacetanihde also may be synthesized directiy from 4-nitrophenol The available reduction—acetylation systems include tin with acetic acid, hydrogenation over Pd—C in acetic anhydride, and hydrogenation over platinum in acetic acid (194,195). Other routes include rearrangement of 4-hydroxyacetophenone hydrazone with sodium nitrite in sulfuric acid and the electrolytic hydroxylation of acetanilide [103-84-4] (196). 

The ring-chlorinated derivatives of toluene form a group of stable, industrially important compounds. Many chlorotoluene isomers can be prepared by direct chlorination. Other chlorotoluenes are prepared by indirect routes involving the replacement of amino, hydroxyl, chlorosulfonyl, and nitro groups by chlorine and the use of substituents, such as nitro, amino, and sulfonic acid, to orient substitution followed by their removal from the ring. 

Other derivatives can be prepared by reaction of the alcohol with an acid anhydride. For example, phthalic or 3-nitrophthalic anhydride (I mol) and the alcohol (Imol) are refluxed for half to one hour in a non-hydroxylic solvent, e.g. toluene or alcohol-free chloroform, and then cooled. The phthalate ester crystallises out, is precipitated by the addition of low boiling petroleum ether or is isolated by ev toration of the solvent. It is recrystallised from water, 50% aqueous ethanol, toluene or low boiling petroleum ether. Such an ester has a characteristic melting point and the alcohol can be recovered by acid or alkaline hydrolysis. 

Solid esters are easily crystallisable materials. It is important to note that esters of alcohols must be recrystallised either from non-hydroxylic solvents (e.g. toluene) or from the alcohol from which the ester is derived. Thus methyl esters should be crystallised from methanol or methanol/toluene, but not from ethanol, n-butanol or other alcohols, in order to avoid alcohol exchange and contamination of the ester with a second ester. Useful solvents for crystallisation are the corresponding alcohols or aqueous alcohols, toluene, toluene/petroleum ether, and chloroform (ethanol-free)/toluene. Esters of carboxylic acid derived from phenols... 

Constitution. On oxidation with chromic acid, conhydrine yields Z-piperidyl-2-earboxylic acid. It is converted into Z-coniine either by reduction of the iodo-derivative (iodoconiine), C,HijNI, formed by the action of hydriodic acid and phosphorus at 180° or by hydrogenation of the mixture of coniceines produced, when it is dehydrated by phosphorus pentoxide in toluene. These and other observations indicate that the p- ygen atom must occur as a hydroxyl group, in the w-propyl side-chain in either the a- (XV) or (XVI) position, since the y-position would involve... 

The position of the free hydroxyl group in these two alkaloids is either C or C , since Spath has shown that the OiV-diacetyl derivative of -5-hydroxy-3 4-dimethoxyphenylethylamine, when heated in toluene solution with phosphoric oxide, yields a product which must be either 6-acetoxy-7 8-dimethoxy-, or 8-acetoxy-6 7-dimethoxy-l-methyl-3 4-dihydrowoquinoline. On reduction with tin and hydrochloric acid t is converted into anhalonidine, which must therefore be 6-hydroxy-7 8-dimethoxy- (or 8-hydroxy-6 7-dimethoxy-)-l-methyl-l 2 3 4-tetrahydrofsoquinoline. Similarly the methiodide of the acetoxy-com-pound on reduction yields, by loss of acetic acid and addition of two hydrogen atoms, pellotine, proving the latter to be A -methylanhalonidine. The position of the free hydroxyl group was finally shown by Spath to... 

In a 250 ml Erlenmeyer flask covered with aluminum foil, 14.3 g (0.0381 mole) of 17a-acetoxy-3j5-hydroxypregn-5-en-20-one is mixed with 50 ml of tetra-hydrofuran, 7 ml ca. 0.076 mole) of dihydropyran, and 0.15 g of p-toluene-sulfonic acid monohydrate. The mixture is warmed to 40 + 5° where upon the steroid dissolves rapidly. The mixture is kept for 45 min and 1 ml of tetra-methylguanidine is added to neutralize the catalyst. Water (100 ml) is added and the organic solvent is removed using a rotary vacuum evaporator. The solid is taken up in ether, the solution is washed with water and saturated salt solution, dried over sodium sulfate, and then treated with Darco and filtered. Removal of the solvent followed by drying at 0.2 mm for 1 hr affords 18.4 g (theory is 17.5 g) of solid having an odor of dihydropyran. The infrared spectrum contains no hydroxyl bands and the crude material is not further purified. This compound has not been described in the literature. 

Tartaric acid, 114 Terephthalic acid, i7r Tetrabromocresol, 165 7 hiocarbamide, 128 Thiocarbanilamide, 159 Thiocarbanilide, 159 Thiourea, 128 /i-Tolyl bromide, 167 / Tolyl chloride, 165 /-Tolyl cyanide, 169 Tolyliodochloride, 169 Toluene from toluidine, 163 / Toluic acid, 170 Tribromophenol, 180 Trichloracetic acid, 99 Trimethylxanthine, 131 l rinitrophenol, 185 Triphenylguanidine, ito Triphenylmetbane, 2 4 J schugac s hydroxyl method, 223 Tube furnace, 23 Tyrosine, 133... 

A mixture of 2-chloro-A-(2-hydroxyl-l-methyl-2-phenylethyl)benzamide (44) (9.5g, 24.9 mmol) and P2O5 in o-chlorobenzene (1,50 mL) was refluxed overnight. Upon completion, the reaction was cooled to room temperature and then chilled to 0 °C. To the crude reaction mixture, 300 mL of water was cautiously added. The resulting dark solution was washed with toluene (2 x 50 mL). The aqueous layer was cooled to 0 °C and 50% NaOH added to final pH of 11. The resulting mixture was extracted with toluene (4 x 50 mL). The toluene fractions were combined, dried, filtered and concentrated in vacuo. The residue was crystallized from benzene to afford l-(2-chlorophenyl)-3-methylisoquinoline (45) as a white solid (6.68g, 80%). M.P. = 107-108 °C H NMR (CDCI3) S 8.45 (s, IH), 8.11 (d, IH), 7.85 (dt, IH), 7.41-7.68 (bm, 6H), 2.51 (s, 3H). 

---