Thiol sulfide from

The System described in the previous section has been extended with a sulfur chemiluminescence detector (SCO) for the detection of Sulfur compounds (32). The separated fractions were thiols + sulfides + thiophenes (as one group), benzothio-phenes, dibenzothiophenes and benzonaphtho-thiophenes. These four groups have been subsequently injected on-line into and separated by the GC unit. Again, no overlap between these groups has been detected, as can be seen from Figure 14.20, in which the total sulfur compounds are shown and from Figure 14.21 in which the separated dibenzothiophenes fraction is presented. The lower limit of detection of this method proved to be 1 ppm (mg kg ) sulfur per compound. 

In 1978 and 1980 the coupling of aryl bromides and iodides with both aliphatic and aromatic thiols was first reported in the presence of NaO-t-Bu and Pd(PPh3)4 (Equation (35)).118,119 In contrast to aryl halide aminations and etherifications, the thiation reactions did not require unusual catalysts. Yet, reactions that form aryl alkyl sulfides from alkyl thiols occurred in modest yields in many cases ... 

Several palladium catalysts for formation of aryl sulfides from aryl halides have been investigated more recently. A combination of Pd2(dba)3 and DPEphos catalyzed the formation of a broad range of diaryl sulfides in the presence of 1 mol.% palladium and NaO-t-Bu base in toluene solvent.12,rThe highest yields of alkyl aryl sulfides were obtained from aryl triflates and n-butyl thiol catalyzed by a combination of palladium acetate and BINAP. However, these reactions contained 10 mol.% catalyst, were long, and required deactivated aryl triflates. A combination of Pd2(dba)3 and DPPF catalyzed the coupling of thiols with resin-bound aryl halides.121... 

The palladium-catalyzed formation of sulfides can generate polyphenylene sulfide from a dithiol and a dibromoarene, or from 4-bromobenzenethiol (Equation (38)).17 In 1984 Asahi Glass obtained patents for the formation of this polymer in the presence of palladium and nickel catalysts.125,126 In addition, Gingras reported palladium-catalyzed couplings of aryl halides and thiols to form discrete phenylene sulfide oligomers.127,128 A number of polyphenylene sulfide wires, ranging from dimeric to pentameric structures, were prepared by the palladium coupling, albeit in modest yields ... 

Reductive Thiolation. Treatment of aldehydes with triethylsilane, thiols, and boron trifluoride monohydrate 217 yields sulfides in a one-flask process. For example, this method gives a 97% yield of benzyl isopropyl sulfide from benzaldehyde and 2-propanethiol (Eq. 204).365... 

Figure 4.8. The sulfur cycle where S° is elemental sulfur, H2S is hydrogen sulfide, S2032" is thiosulfate, SO32" is sulfite, SO/- is sulfate, R-OSO3H represents a sulfate ester, R-SO3H a sulfonic acid, R-S-R a thioether, and R-SH a thiol. (Adapted from Coyne MS. Soil Microbiology An Experimental Approach. Boston Delmar Publishers 1999.)...

Form sulfide from thiol (NaOH, R CH2X)... 

It is more than likely that when sulfur occurs in a crude oil or in coal (other than the pyrites), it is organically bound in one of the three forms listed in Table 8.3—the thiols, sulfides, or disulfides. The combustion of these compounds is very much different from that of other sulfur compounds in that... 

The most important applications of hydrogen sulfide involve the production of sodium sulfide and other inorganic sulfides. Hydrogen sulfide obtained as a by-product often is converted into sulfuric acid. It also is used in organic synthesis to make thiols or mercaptans. Other applications are in metallurgy for extracting nickel, copper, and cobalt as sulfides from their minerals and in classical qualitative analytical methods for precipitation of many metals (see Reactions). It also is used in producing heavy water for nuclear reactors. 

TABLE 4.18 Shift Position of Thiols, Sulfides, and Disulfides (ppm from TMS)... 

Sodium sulfhydride (NaSH) is a much better reagent for the formation of thiols (mercaptans) from alkyl halides than H2S and is used much more often. It is easily prepared by bubbling H2S into an alkaline solution, but hydrosulfide on a supported polymer resin has also been used. " The reaction is most useful for primary halides. Secondary substrates give much lower yields, and the reaction fails completely for tertiary halides because elimination predominates. Sulfuric and sulfonic esters can be used instead of halides. Thioethers (RSR) are often side products. The conversion can also be accomplished under neutral conditions by treatment of a primary halide with F and a tin sulfide, such as PhsSnSSnPhs. An indirect method for the preparation of a thiol is the reaction of an alkyl halide with thiourea to give an isothiuronium salt (119), and subsequent treatment with alkali or a... 

---