Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Thermal decomposition, high-temperatur

Wood has very useful thermal properties. Dry wood has a low thermal conductivity and a high heat capacity, and is resistant to thermal decomposition at temperatures up to 250°C for short periods of time. [Pg.958]

Resin Mode of thermal decomposition Low-temperature products High-temperature products... [Pg.14]

Gas chromatography is applicable for compounds with a reasonably high volatility or molecules that are insensitive to thermal decomposition at temperatures below 200-300 °C. HPLC instruments operate in the liquid phase and are particularly suited for compounds with poor thermal stability or low volatility. They may also be used for organic compounds that are volatile. HPLC is very useful for the pharmaceutical and biological industry to separate ionic... [Pg.286]

Votsmeier M, Song S, Davidson D F and Hanson R K 1999 Shock tube study of monomethylamine thermal decomposition and NH2 high temperature absorption coefficients int. J. Chem. Kinetics 31 323-30... [Pg.2149]

Ozone is formed in certain chemical reactions, including the action of fluorine on water (p. 323) and the thermal decomposition ofiodic(VII) (periodic) acid. It is also formed when dilute (about 1 M) sulphuric acid is electrolysed at high current density at low temperatures the oxygen evolved at the anode can contain as much as 30% ozone. [Pg.263]

Uranium can be prepared by reducing uranium halides with alkali or alkaline earth metals or by reducing uranium oxides by calcium, aluminum, or carbon at high temperatures. The metal can also be produced by electrolysis of KUF5 or UF4, dissolved in a molten mixture of CaCl2 and NaCl. High-purity uranium can be prepared by the thermal decomposition of uranium halides on a hot filament. [Pg.200]

Coal can be converted to gas by several routes (2,6—11), but often a particular process is a combination of options chosen on the basis of the product desired, ie, low, medium, or high heat-value gas. In a very general sense, coal gas is the term appHed to the mixture of gaseous constituents that are produced during the thermal decomposition of coal at temperatures in excess of 500°C (>930°F), often in the absence of oxygen (air) (see Coal CONVERSION PROCESSES, gasification) (3). A soHd residue (coke, char), tars, and other Hquids are also produced in the process ... [Pg.62]

However, because of the high temperature nature of this class of peroxides (10-h half-life temperatures of 133—172°C) and their extreme sensitivities to radical-induced decompositions and transition-metal activation, hydroperoxides have very limited utiUty as thermal initiators. The oxygen—hydrogen bond in hydroperoxides is weak (368-377 kJ/mol (88.0-90.1 kcal/mol) BDE) andis susceptible to attack by higher energy radicals ... [Pg.227]

Thermal Stability. The saturated C —C 2 ketones are thermally stable up to pyrolysis temperatures (500—700°C). At these high temperatures, decomposition can be controlled to produce useful ketene derivatives. Ketene itself is produced commercially by pyrolysis of acetone at temperatures just below 550°C (see Ketenes, ketene dil rs, and related substances). [Pg.487]

Lithium Oxide. Lithium oxide [12057-24-8], Li20, can be prepared by heating very pure lithium hydroxide to about 800°C under vacuum or by thermal decomposition of the peroxide (67). Lithium oxide is very reactive with carbon dioxide or water. It has been considered as a potential high temperature neutron target for tritium production (68). [Pg.226]

At the high temperatures found in MHD combustors, nitrogen oxides, NO, are formed primarily by gas-phase reactions, rather than from fuel-bound nitrogen. The principal constituent is nitric oxide [10102-43-9] NO, and the amount formed is generally limited by kinetics. Equilibrium values are reached only at very high temperatures. NO decomposes as the gas cools, at a rate which decreases with temperature. If the combustion gas cools too rapidly after the MHD channel the NO has insufficient time to decompose and excessive amounts can be released to the atmosphere. Below about 1800 K there is essentially no thermal decomposition of NO. [Pg.422]

Thermal stabihty of the foaming agent in the presence of high temperature steam is essential. Alkylaromatic sulfonates possess superior chemical stabihty at elevated temperatures (205,206). However, alpha-olefin sulfonates have sufficient chemical stabihty to justify their use at steam temperatures characteristic of most U.S. steamflood operations. Decomposition is a desulfonation process which is first order in both surfactant and acid concentrations (206). Because acid is generated in the decomposition, the process is autocatalytic. However, reservoir rock has a substantial buffering effect. [Pg.193]

A residuum, often shortened to resid, is the residue obtained from petroleum after nondestmctive distillation has removed all the volatile materials. The temperature of the distillation is usually below 345°C because the rate of thermal decomposition of petroleum constituents is substantial above 350°C. Temperatures as high as 425°C can be employed in vacuum distillation. When such temperatures are employed and thermal decomposition occurs, the residuum is usually referred to as pitch. By inference, the name is used in the same manner as when it refers to the nonvolatile residue from the thermal decomposition of coal tar (3). [Pg.200]

Thermal decomposition of hydrocarbons is carried out ia the absence of oxygen and at a high temperature required to break the carbon—hydrogen... [Pg.15]

PTMEG is a polymeric ether susceptible to both thermal and oxidative degradation. It usually contains 300—1000 ppm of an antioxidant such as 2,6-di-/ f2 -butyl-4-hydroxytoluene (BHT) to prevent oxidation under normal storage and handling conditions. Thermal decomposition in an inert atmosphere starts at 210—220°C (410—430°E) with the formation of highly flammable THE. In the presence of acidic impurities, the decomposition temperature can be significantly reduced contact with acids should therefore be avoided, and storage temperatures have to be controlled to prevent decomposition to THF (261). [Pg.365]


See other pages where Thermal decomposition, high-temperatur is mentioned: [Pg.314]    [Pg.639]    [Pg.639]    [Pg.106]    [Pg.316]    [Pg.248]    [Pg.1224]    [Pg.58]    [Pg.67]    [Pg.252]    [Pg.99]    [Pg.298]    [Pg.98]    [Pg.14]    [Pg.317]    [Pg.60]    [Pg.219]    [Pg.466]    [Pg.273]    [Pg.362]    [Pg.387]    [Pg.22]    [Pg.275]    [Pg.350]    [Pg.9]    [Pg.38]    [Pg.354]    [Pg.419]    [Pg.101]    [Pg.226]    [Pg.227]    [Pg.281]    [Pg.293]    [Pg.433]   
See also in sourсe #XX -- [ Pg.203 ]




SEARCH



Decomposition temperature

Temperature thermal decomposition

Thermal decomposition

Thermal temperature

Thermalization temperature

© 2024 chempedia.info