Tetrahydrofuran complex with borane

The products are Hquids, soluble in various solvents and stable over prolonged periods. Monochloroborane is an equiUbtium mixture containing small amounts of borane and dichloroborane complexes with dimethyl sulfide (81). Monobromoborane—dimethyl sulfide complex shows high purity (82,83). Solutions of monochloroborane in tetrahydrofuran and diethyl ether can also be prepared. Strong complexation renders hydroboration with monochloroborane in tetrahydrofuran sluggish and inconvenient. Monochloroborane solutions in less complexing diethyl ether, an equiUbtium with small amounts of borane and dichloroborane, show excellent reactivity (88,89). Monochloroborane—diethyl etherate [36594-41-9] (10) may be represented as H2BCI O... 

Scheme 4 outlines the synthesis of key intermediate 7 in its correct absolute stereochemical form from readily available (S)-(-)-malic acid (15). Simultaneous protection of the contiguous carboxyl and secondary hydroxyl groups in the form of an acetonide proceeds smoothly with 2,2 -dimethoxypropane and para-toluene-sulfonic acid and provides intermediate 26 as a crystalline solid in 75-85 % yield. Chemoselective reduction of the terminal carboxyl group in 26 with borane-tetrahydrofuran complex (B H3 THF) affords a primary hydroxyl group that attacks the proximal carbonyl group, upon acidification, to give a hydroxybutyrolactone. Treat-... 

In a 250 mL round-bottomed flask with an argon inlet equipped with a magnetic stirring bar the CBS-catalyst (1.85 g) was dissolved in tetrahydrofuran (10 mL) and cooled to 0°C in an ice bath. From a syringe filled with borane dimethyl sulfide-complex (2.00 mL dissolved in 10 mL THF) 20% of the volume (2.40 mL) were added and the solution was stirred for 5 minutes. A solution of the diketone (3.00 g dissolved in 30 mL THF) was added from a second syringe simultaneously with the rest of the borane dimethyl sulfide-complex over 2 hours. The resulting yellow solution was stirred for another... 

Borane-tetrahydrofuran complex Furan, tetrahydro, compd. with borane (1 1) (8,9) (14044-65-6)... 

A boron analog - sodium borohydride - was prepared by reaction of sodium hydride with trimethyl borate [84 or with sodium fluoroborate and hydrogen [55], and gives, on treatment with boron trifluoride or aluminum chloride, borane (diborane) [86. Borane is a strong Lewis acid and forms complexes with many Lewis bases. Some of them, such as complexes with dimethyl sulfide, trimethyl amine and others, are sufficiently stable to have been made commercially available. Some others should be handled with precautions. A spontaneous explosion of a molar solution of borane in tetrahydrofuran stored at less than 15° out of direct sunlight has been reported [87]. 

Opening of a bottle where some particles of lithium aluminum hydride were squeezed between the neck and the stopper caused a fire [68]. Lithium aluminum hydride must not be crushed in a porcelain mortar with a pestle. Fire and even explosion may result from contact of lithium aluminum hydride with small amounts of water or moisture. Sodium bis(2-methoxy-ethoxy)aluminum hydride (Vitride, Red-Al ) delivered in benzene or toluene solutions also may ignite in contact with water. Borane (diborane) ignites in contact with air and is therefore kept in solutions in tetrahydrofuran or in complexes with amines and sulfides. Powdered lithium borohydride may ignite in moist air. Sodium borohydride and sodium cyanoborohydride, on the other hand, are considered safe. ... 

High yields of amines have also been obtained by reduction of amides with an excess of magnesium aluminum hydride (yield 100%) [577], with lithium trimethoxyaluminohydride at 25° (yield 83%) [94] with sodium bis(2-methoxy-ethoxy)aluminum hydride at 80° (yield 84.5%) [544], with alane in tetra-hydrofuran at 0-25° (isolated yields 46-93%) [994, 1117], with sodium boro-hydride and triethoxyoxonium fluoroborates at room temperature (yields 81-94%) [1121], with sodium borohydride in the presence of acetic or trifluoroacetic acid on refluxing (yields 20-92.5%) [1118], with borane in tetrahydrofuran on refluxing (isolated yields 79-84%) [1119], with borane-dimethyl sulflde complex (5 mol) in tetrahydrofuran on refluxing (isolated yields 37-89%) [1064], and by electrolysis in dilute sulfuric acid at 5° using a lead cathode (yields 63-76%) [1120]. 

Reduction of 5,5-dimethyl-2-pyrrolidone with 3 mol of lithium aluminum hydride by refluxing for 8 hours in tetrahydrofuran gave 2,2-dimethylpyrrol-idine in 67-79% yields [1123]. Reduction of e-caprolactam was accomplished by heating with sodium bis(2-methoxyethoxy)aluminum hydride [544], by successive treatment with triethyloxonium fiuoroborate and sodium borohydride [1121], and by refluxing with borane-d ras. )a.y sulfide complex [1064]. 

Introduction of the C2 sulfonamide is accomplished via sulfonylation with chlorosulfonic acid, conversion to the sulfonyl chloride using thionyl chloride, and amidation using concentrated ammonium hydroxide in tetrahydrofuran. Reduction of the 4-acetamido compound using borane-tetrahydrofuran complex provides the 4-ethylamino derivative. The 45,65-frans diastereomer is selectively crystallized as its maleate salt from acetone in the presence of the unwanted 4R,6S-cis diastereomer. Neutralization of the maleate salt and extraction of the free base in ethyl acetate, followed by formation of the hydrochloride salt, yields crude dorzolamide hydrochloride. 

High stereoselectivities (94-100 %) are attained in the reduction of aromatic ketones by use of a new chiral borane complex with (S)-2-amino-3-methyl-l,l-diphenylbutan-l-ol,(S-68) readily prepared in two steps from (S)-valine, in an experimentally convenient procedure961. (S)-Valine methyl ester hydrochloride was converted with excess of phenylmagnesium bromide into (S-68). The same treatment of (R)-valine gave (R-68). In a typical asymmetric reduction the reagent, prepared from (S-68) and borane, and the ketone (69) in tetrahydrofuran were kept at 30 °C for some hours. The corresponding alcohols were obtained in high optical purity. (S-68) could be recovered to more than 80% without racemization 96). 

A 0.5 M solution of 9-BBN in tetrahydrofuran was purchased from Aldrich Chemical Company, Inc., and was used without additional purification. The preparation2 of the reagent by hydroboration of 1,5-cyclooctadiene with borane/tetrahydrofuran complex is reported. 

Compound with 9S-cinchonan-9-ol (3974950-3), 67, 1 Borane-dimethylsulfide (13292-87-0), 68, 77 Borane, tetrahydrofuran complex, 69, 214... 

Reductive cleavage of dioxepanes with borane-THF complex (THF = tetrahydrofuran) leads to 1,4-diols. This procedure has found application in the synthesis of discrete polyethers (Scheme 27) <2003JOC9166>. 

Borane-Amine Complexes or Borane Tetrahydrofuran. Deactivate by slow addition of a mixture of the appropriate solvent and butanol. Place in a separate labeled container for disposal by burning. Spray into furnace equipped with afterburner and scrubber.12 13... 

Another method for the addition of the elements of water, H and OH, to an alkene was developed by H. C. Brown, who shared the 1979 Nobel Prize in chemistry for this work. In this reaction the alkene is first allowed to react with a complex of borane (BH3) in tetrahydrofuran (THF). The initial product is then allowed to react with a basic solution of hydrogen peroxide. An example is shown in the following equation ... 

Complexes with Electrophiles An ether s nonbonding electrons also stabilize borane, BH3. Pure borane exists as a dimer called diborane, B2H6. Diborane is a toxic, flammable, and explosive gas, whose use is both dangerous and inconvenient. Borane forms a stable complex with tetrahydrofuran. The BH3 THF complex is commercially available as a 1 M solution, easily measured and transferred like any other air-sensitive liquid reagent. The availability of BH3 THF has contributed greatly to the convenience of hydroboration (Section 8-7). 

Tris(N-methylanilino)borane has previously been prepared by the reaction of boron trifluoride-ether complexes with three equivalents each of N-methylaniline and a suitable Grignard reagent,1,2 by the reaction of (N-methylanilino)potassium with boron trifluoride-ether complexes,2 and by aminolysis of boron trichloride by N-methylaniline.3 The present general procedure describes a convenient preparation of tris(N-methylanilino)-borane by the reaction of (N-methylanilino)lithium and boron trifluoride-diethyl ether in tetrahydrofuran-hexane as solvent. 

Cirpinen9 Bicyclo 3.1.1]hept-2-ene, 2,6,6-lrimethyl-, (IS)- (9) (7785-26-4) 0Ors-3ria-tetrahydrofuran complex Furan, tetrahydro-, compd. with borane (1.T) (8,9) (14 .o44-65-6)... 

Treatment of cyanoethylcellulose with borane-dimethylsulfide or borane-tetrahydrofuran complexes in tetrahydrofuran has resulted in the quantitative conversion to 3-aminopropylceIlulose. Such aminopropylcellulose derivatives have also been employed as intermediates for acetamido or aryluredo products, and in grafting reactions [119]. 

The Step 2 product (2.3 mmol) dissolved in 30 ml of THE was treated with a borane-tetrahydrofuran complex (23 mmol) and then refluxed for 18 hours and quenched with water. The mixture was concentrated and treated with 6M hydrochloric acid and... 

---