Tetraalkylammonium preparation

A mild and effective method for obtaining N- acyl- and N- alkyl-pyrroles and -indoles is to carry out these reactions under phase-transfer conditions (80JOC3172). For example, A-benzenesulfonylpyrrole is best prepared from pyrrole under phase-transfer conditions rather than by intermediate generation of the potassium salt (81TL4901). In this case the softer nature of the tetraalkylammonium cation facilitates reaction on nitrogen. The thallium salts of indoles prepared by reaction with thallium(I) ethoxide, a benzene-soluble liquid. 

This method is based on the generation of the tetraalkylammonium salt of pyrrolidorle, which acts as a base. The method is compatible with a large variety of carboxylic acids and alkylating agents. The method is effective for the preparation of macrolides. 

In the Koenigs-Knorr method and in the Helferich or Zemplen modifications thereof, a glycosyl halide (bromide or chloride iodides can be produced in situ by the addition of tetraalkylammonium iodide) is allowed to react with a hydrox-ylic compound in the presence of a heavy-metal promoter such as silver oxide, carbonate, perchlorate, or mercuric bromide and/or oxide,19-21 or by silver triflu-oromethanesulfonate22 (AgOTf). Related to this is the use of glycosyl fluoride donors,23 which normally are prepared from thioglycosides.24... 

Deoxy-3-[ F]fluoro-D-glucose ( F-3DFG) was prepared - 454,467,473-476 essentially according to the procedure for the cold synthesis (see Section 11,2), namely, treatment of248 with Cs F (in DMF or HMPA), tetraalkylammonium [ F]fluoride (DMF, HMPA, or MeCN) or K F (in acetamide). 6-Deoxy-6-[ F]fluoro-a-D-galactopyranose was likewise pre-pared aceording to the cold synthesis. ... 

Thienoindolizines can be prepared by treatment of the alkenylindolizine 261 with bromine and a base, whereby bromination of the indolizine ring also occurs. Alternatively, reaction of 261 with a tetraalkylammonium tribromide and a base gives the tricycle 262, which can then be brominated to 263 by treatment with molecular bromine <2004CPB279> (Scheme 71). 

Lipophilic ion exchangers traditionally used for polymeric membrane preparation are the anionic tetraphenylborate derivatives and the cationic tetraalkylammonium salts. The charges on both lipophilic ions are localized on a single (boron or nitrogen) atom, but the steric inaccessibility of the charged center, due to bulky substituents, may inhibit ion-pair formation in the membrane and provide, when necessary, non-specific interactions between ionic sites and sample ions. 

The first example of biphasic catalysis was actually described for an ionic liquid system. In 1972, one year before Manassen proposed aqueous-organic biphasic catalysis [1], Par shall reported that the hydrogenation and alkoxycarbonylation of alkenes could be catalysed by PtCh when dissolved in tetraalkylammonium chloride/tin dichloride at temperatures of less than 100 °C [2], It was even noted that the product could be separated by decantation or distillation. Since this nascent study, synthetic chemistry in ionic liquids has developed at an incredible rate. In this chapter, we explore the different types of ionic liquids available and assess the factors that give rise to their low melting points. This is followed by an evaluation of synthetic methods used to prepare ionic liquids and the problems associated with these methods. The physical properties of ionic liquids are then described and a summary of the properties of ionic liquids that are attractive to clean synthesis is then given. The techniques that have been developed to improve catalyst solubility in ionic liquids to prevent leaching into the organic phase are also covered. 

Tetra-n-butylammonium cyanoborohydride has been prepared by metathesis from the quaternary ammonium hydrogen sulphate and sodium cyanoborohydride. Other tetraalkylammonium cyanoborohydrides have also been synthesized [10]. 

For further contributions on the dia-stereoselectivity in electropinacolizations, see Ref. [286-295]. Reduction in DMF at a Fig cathode can lead to improved yield and selectivity upon addition of catalytic amounts of tetraalkylammonium salts to the electrolyte. On the basis of preparative scale electrolyses and cyclic voltammetry for that behavior, a mechanism is proposed that involves an initial reduction of the tetraalkylammonium cation with the participation of the electrode material to form a catalyst that favors le reduction routes [296, 297]. Stoichiometric amounts of ytterbium(II), generated by reduction of Yb(III), support the stereospecific coupling of 1,3-dibenzoylpropane to cis-cyclopentane-l,2-diol. However, Yb(III) remains bounded to the pinacol and cannot be released to act as a catalyst. This leads to a loss of stereoselectivity in the course of the reaction [298]. Also, with the addition of a Ce( IV)-complex the stereochemical course of the reduction can be altered [299]. In a weakly acidic solution, the meso/rac ratio in the EHD (electrohy-drodimerization) of acetophenone could be influenced by ultrasonication [300]. Besides phenyl ketone compounds, examples with other aromatic groups have also been published [294, 295, 301, 302]. 

The use of /i-ketocstcrs and malonic ester enolates has largely been supplanted by the development of the newer procedures based on selective enolate formation that permit direct alkylation of ketone and ester enolates and avoid the hydrolysis and decarboxylation of ketoesters intermediates. Most enolate alkylations are carried out by deprotonating the ketone under conditions that are appropriate for kinetic or thermodynamic control. Enolates can also be prepared from silyl enol ethers and by reduction of enones (see Section 1.3). Alkylation also can be carried out using silyl enol ethers by reaction with fluoride ion.31 Tetraalkylammonium fluoride salts in anhydrous solvents are normally the... 

If a tetraalkylammonium salt is not present, fairly severe contamination by[BuH14]- salts occurs,2 so the procedure is most useful for preparing tetraalkylammonium salts. The potassium salt is often more desirable as it is the specified precursor in the syntheses of iso-B9H 15,3B8H,2,4 and several metallaboranes.5... 

Other tetraalkylammonium salts are also used in electrochemical measurements they are tetraalkylammonium nitrates, picrates, carboxylates, sulfonates, etc. They can be prepared in the laboratory, by neutralizing the corresponding acid in water with ftjNOH just to the equivalence point, removing water, and then drying. If necessary, the products are recrystallized. Some tetraalkylammonium salts form hydrates and are difficult completely to dehydrate. For practical information, see, for example, Ref. [19]. 

Quaternary ammonium salts of heterocyclic compounds have been used in liquid-liquid phase-transfer syntheses. When these compounds are achiral, they show a behavior very similar to that of other quaternary ammonium salts. For example, 2-dialkylamino-l-alkylpyridinium tetrafluoroborates have been used by Tanaka and Mukayama282 in the alkylation of active methylene compounds PhCH2CN, PhCH(Et)CN, and PhCH(Me)COPh. However, comparative studies of the efficiency of the catalysts show that alkylpyridinium bromides283 or N-alkyl-Af-benzyl-piperidinium chloride284 have a smaller catalytic activity compared to tetraalkylammonium halides. McIntosh285 has described the preparation of azapropellane salts 186 as potential chiral phase transfer catalysts. 

---