Temperature effective scale

Temperature effect on ro the change in the scale s no-load reading with changes in ambient temperature, expressed as a percentage of scale capacity pet °C, or the number of scale divisions per 5°C... 

Table 1 is condensed from Handbook 44. It Hsts the number of divisions allowed for each class, eg, a Class III scale must have between 100 and 1,200 divisions. Also, for each class it Hsts the acceptance tolerances appHcable to test load ranges expressed in divisions (d) for example, for test loads from 0 to 5,000 d, a Class II scale has an acceptance tolerance of 0.5 d. The least ambiguous way to specify the accuracy for an industrial or retail scale is to specify an accuracy class and the number of divisions, eg. Class III, 5,000 divisions. It must be noted that this is not the same as 1 part in 5,000, which is another method commonly used to specify accuracy eg, a Class III 5,000 d scale is allowed a tolerance which varies from 0.5 d at zero to 2.5 d at 5,000 divisions. CaHbration curves are typically plotted as in Figure 12, which shows a typical 5,000-division Class III scale. The error tunnel (stepped lines, top and bottom) is defined by the acceptance tolerances Hsted in Table 1. The three caHbration curves belong to the same scale tested at three different temperatures. Performance must remain within the error tunnel under the combined effect of nonlinearity, hysteresis, and temperature effect on span. Other specifications, including those for temperature effect on zero, nonrepeatabiHty, shift error, and creep may be found in Handbook 44 (5). The acceptance tolerances in Table 1 apply to new or reconditioned equipment tested within 30 days of being put into service. After that, maintenance tolerances apply they ate twice the values Hsted in Table 1.

Color Index Name Temperature effect in CIELAB units Fastness to overpainting on a fastness scale from 1 to 5 Bleed resistance on a fastness scale from 1 to 5... 

Just like refractive index, the °Brix scale is quite dependent on the temperature. Manual Abbe refractometers do not compensate for this temperature effect. Special correlation tables are used to adjust the readings to a standard temperature, 20°C. Digital refractometers, on the other hand, can operate over a fairly wide range of sample temperatures (+15 to +40°C) and automatically apply these temperature corrections. See Workplace Scene 15.2. 

It is interesting to contrast the rate ratio for reactions 10.1 and 10.4 where either H or D atoms react with H2 with that for reactions 10.1 and 10.7 where common H atoms react with either H2 or D2 (compare Figs. 10.1a and b). In the first case, (kH,HH/kD,HH), there is a ZPE difference in the transition state but not the ground state consequently the high temperature KIE is inverse. In the second (kH,HH/kH,DD), however, there are zero point energy differences in both the transition and ground states. We expect the vibrational force constants to be smaller in the more loosely bound transition as compared to the ground state. The isotope effects scale with the force constant differences. Consequently RT[ln(kH,HH/kH,DD)] =... 

On the other hand, since most of these reactions are thermally activated, their kinetics are accelerated by the rise in temperature in an Arrhenius-like manner. Therefore, within a much shorter time scale, the adverse effect of these reactions could become rather significant during the storage or operation of the cells at elevated temperatures. In this sense, the long-term and the thermal stability of electrolytes can actually be considered as two independent issues that are closely intertwined. The study of temperature effects on electrolyte stability is made necessary by the concerns over the aging of electrolytes in lithium-based devices, which in practical applications are expected to tolerate certain high-temperature environments. The ability of an electrolyte to remain operative at elevated temperatures is especially important for applications that are military/space-related or traction-related (e.g., electric or hybrid electric vehicles). On the other hand, elevated tem-... 

The thermodynamics of these reaction systems have been investigated, resulting in methods to predict the direction of a typical reaction a priori. Furthermore, studies on kinetics, enzyme concentration, pH/temperature effects, mixing, and solvent selection have opened up new perspectives for the understanding, modeling, optimization, and possible large-scale application of such a strategy. 

The steady movement of the baseline either up or down the scale is referred to as drift. Drift is often indicative of variations in chromatographic conditions, such as temperature or solvent programming. It can also be indicative of instrument instability owing to temperature effects on the detector. 

The first series of experiments was devoted to determination of the effect scale on the slit temperature. In the second series of experiments we used the slits formed by massive plates of gold-silver alloy and pure palladium, varying considerably their microstructure. Namely, they were initially highly cold-hardened samples and later on the ones annealed at the recrystallisation temperature. In other words, we deal with either fine-grained or coarse-grained metal surfaces. 

TEMPERATURE EFFECTS ON THE SCALING PROPERTIES OF ADSORPTION ON BIVARIATE HETEROGENEOUS SURFACES... 

---