Technological Tests

The tubular design is the most advanced SOFC technology. Tests of a nominal WFC 25-kW SOFC unit were started in 1992 at Rokko Island near Osaka, Japan in a joint program by Kansai Electric Co., Osaka Gas, and Tokyo Gas Co. This unit consists of 1152 cells, 50-cm length, which are contained... 

The DOE still retains oversight of two Naval Petroleum Reserve properties and one technology testing center Teapot Dome Naval Petroleum Reserve 3 in Wyoming and a small stripper well oil field with 540 wells. The Rocky Mountain Oilfield Testing Center identifies and resolves technical and environmental issues associated with the production, distribution and use of the nation s energy resources. It was established in 1994 and is the only oil field testing center in the United States. 

Demonstration I (demonstration testing of the initial three technologies selected for the first phase of ACWA technology testing)... 

Siemens Westinghouse, in conjunction with Ontario Hydro Technologies, tested AES cells at pressures up to 15 atmospheres on both hydrogen and natural gas (22). Figure 8-8 illustrates the performance at various pressures ... 

International Harmonization of General Monographs on Dosage Forms and Pharmaco-technological Test Methods Seville October 1998... 

R.F. Reiter, R. Volberding and A.J. Johnson, DARPA cargo container inspection technology test bed program, in Contraband and Cargo Inspection Technology International Symposium, 28—30 October 1992, Washington, DC, ONDCP and NIJ (1992) 227-234. 

Recently, monoclonal antibodies were attached to gas-filled microbubbles using this spacer coupHng technology. Testing in vitro, in a cell culture system, demonstrated selective accumulation of decafluorobutane-based lipid shell MP1950 microbubbles with covalently attached anti-lCAM-1 antibodies, onto the surface of activated endotheUum [8]. Anti-P-selectin antibodies attached to such microbubbles via an avidin-biotin scheme showed selective accumulation in the areas of inflammation and ischemia/reperfusion injury in an animal model [93]. In the latter example, biotin was also connected to the microbubble surface via a flexible polymer spacer arm. 

Adhesives are used in everyday applications. Adhesives may be in liquid form or thick pastes. Their main mechanism is based on the polymerization or crosslinking of polymers, which gives rise to glue or other adhesive application. The degree of adhesion of such a process is determined by conventional technological tests. 

The summary s importance cannot be overstated. In this section, the sponsor can state and argue its case for the product s approval. A well-prepared summary includes a straightforward description of the product and its manufacturing technology, testing data, nonclinical data, clinical data, and adverse and beneficial effects. Such a summary can build CBER s confidence in the applicant, the validity of the BLA s information, and the product itself. In addition, because the summary is one of the few sections reviewed by all members of the BLA licensing committee, it can be pivotal in establishing a foundation for product approval. 

A new chapter has been introduced that brings together all the monographs describing dosage forms, and whenever necessary, the monographs have been supplemented by technological tests and harmonized so that the chapter constitutes a coherent whole. 

The summary s importance cannot be overstated. In this section, the sponsor can state and argue its case for the product s approval. A wellprepared summary includes a straightforward description of the product and its manufacturing technology, testing data, nonclinical data, clinical data, and adverse and beneficial effects. 

As part of a technology test program for non-stockpile CWM, the NSCMP hired Stone Webster to conduct tests of the MGC/PLASMOX plasma arc process on simulated H and GB neutralents with MEA. MGC conducted these tests from January 8 through January 19, 2001, under a subcontract to Bums and Roe Enterprises at the MGC/PLASMOX facility in Switzerland. 

Jefferson Proving Ground, Indiana FY 1995 Army base closure. Research and development technology testing-demonstration for subsurface unexploded ordnance detection, identification, and remediation in a controlled test environment. 

Sunflower Army Ammunition Plant, Kansas Partially active and partially closed Army ammunition manufacturing facility. Research and development and applied technology testing-demonstration for contaminated media. This would also be a DOIT Committee process demonstration site. Possible future demilitarization site for missiles is a research and development opportunity for missile fuels technology. 

In all cases, the success of bioaugmentation rehes on the survival of augmented biomass. However, oxygen supply is also important. At the US. National Environmental Technology Test Site, at Port Hueneme, California,... 

Unfortunately, 40% of all the production wells in areas selected for steam treatment broke down for different reasons. This failure made it difficult to carry out some of the planned technological tests. Although several of these wells were put back into operation, they were not properly located to enable effective control of the steaming process for the field as a whole. 

Edward Doyle and Joseph Cardito, Technology Test Program for Treatment of NSCMP Feeds, presentation to the committee on September 25, 2001. 

Batch SCWO is part of NSCMP s long-term technology test program (see Table 2-4). As such, several years of development and scale-up are required before an operational unit is available for testing. Decisions concerning subsequent deployment of this unit would depend on the needs at the time that it is available (mid-2006, at the earliest). 

---