Technical procedural

Documents derived from these policies and practices, such as drawings, specifications, plans, work instructions, technical procedures, and reports... 

Technical procedures to determine production rate, reservoir pressure, temperature, permeability, and skin effect, and to sample gas and liquids for analysis. 

Technical procedures to increase the production rate of a well. 

Normal values / ranges for medical / laboratory /technical procedures and/or tests included in the protocol... 

Updates of medical / laboratory / technical procedures / tests... 

In recent years, regulatory authorities and industry associations have undertaken several important initiatives to promote international harmonization of regulatory requirements. These efforts are designed to enhance harmonization and are committed to seeking scientifically based harmonized technical procedures for pharmaceutical development. These efforts are undertaken under the auspices of the International Conference on Harmonization (ICH), which is organized to provide an opportunity for tripartite... 

Two basically different technical procedures are at present in use to measure the amount of radiocarbon in matter ... 

Thus for an ideal two-phase system the total calibrated intensity that is scattered into the reciprocal space is the product of the square of the contrast between the phases and the product of the volume fractions of the phases, Vi (1 — Vi) = V1V2. V1V2 is the composition parameter66 of a two-phase system which is accessible in SAXS experiments. The total intensity of the photons scattered into space is thus independent from the arrangement and the shapes of the particles in the material (i.e., the topology). Moreover, Eq. (8.54) shows that in the raw data the intensity is as well proportional to the irradiated volume. From this fact a technical procedure to adjust the intensity that falls on the detector is readily established. If, for example, we do not receive a number of counts that is sufficient for good counting statistics, we may open the slits or increase the thickness of a thin sample. 

Generally, poly(3HB) can be produced discontinuously or continuously. To reach high biomass concentrations fed-batch processes are the method of choice. Continuous methods have only been occasionally used, but unfounded, as shown below. Comprehensive reviews on the current state of technical procedures have been given by Lee and Chang [103], Lee [99], Braunegg et al. [37], and Madison and Huisman [104]. Special conditions and approaches to maximize the exploitation of bacterial potentials with the two types of process regime are discussed below. 

Procedures should be organized and indexed in the form of manuals and must be written in compliance with National Committee for Clinical Laboratory Standards (NCCLS) GP2-A2 (3). Technical procedures designed for use at the bench should be complete, easy to follow, and readily available to testing personnel. These procedures must contain the following information for each assay performed ... 

National Committee for Clinical Laboratory Standards (1992) Clinical Laboratory Technical Procedure Manuals, Approved Guideline GP2-A2, 2nd ed. NCCLS, Villanova, PA. 

The quality manual shall include or make reference to the supporting procedures including technical procedures. 

The quality manual also has to include or has to make reference to all supporting and technical procedures. The quality manual therefore is the central document of the quality management system. 

For lack of an acceptable routine procedure for the direct assessment of ciguatoxin in fish tissues, the mouse bioassay with extracted lipids remains the method of choice for most laboratories doing ciguatoxin research. In addition, the radioimmunoassay has proven of value in screening S. dumerili (22, 23), but it is precluded for routine screening because of its cost factor and technical procedure. Nevertheless, it has been of value in the survey and assessment of new fishing grounds (28). 

It is not a simple technical procedure to keep the drying time as short as possible. Both the water content and the layer thickness of the drying substance are important. Only the principles can be slated here. In case of special questions we advise you to contact our experts in our Cologne factory. 

The reduction depicted in equation 53 is the basis of a method for determination of POV in the 0 to 10 meqkg range by FTNIR. Although the technical procedure is simple, data need PLS analysis because of the overlap of signals in the data acquisition region (4695 to 4553 cm- )235,435... 

The chemistry of cheesemaking can be divided into several phases the characteristics of milk, the cheesemaking process, and the ripening of cheese. The types of cheeses differ in specific aspects of the three phases, but there are substantial similarities. General principles will be emphasized in this chapter, with references to unique aspects of important types. The reader is referred to the previous volume of Fundamentals of Dairy Chemistry for early research reports (Emstrom and Wong 1974). The details of the technical procedures for the manufacture of different cheeses are beyond the scope of this book. Selected references on the manufacture of a variety of cheeses include Van Slyke... 

This pioneering work showed that the sodium pump was not confined to the plasma membrane of excitable cells (the pump is in fact found in virtually all animal cells) it also paved the way for an avalanche of mechanistic studies examining very many aspects of the function of the sodium pump. These included partial reactions, kinetic affinities for the three substrates at both sides of the membrane and their mutual interdependence, ATP utilization and its stoichiometric relationship to cation fluxes. Such experiments were readily performed on the red cell since these are available in large quantities and the development of simple technical procedures such as red cell ghost formation by transient hypotonic shock allowed ready access to, and control of, the intra- as well as extra-cellular face of the pump. 

Harvey, C. O., Separation of technetium by cation exchange and solvent extraction prior to measurement by beta counting. PNNL Technical Procedure pnl-alo-432, 1993, Pacific Northwest National Laboratory, Richland, WA. 

A scheme of the technical procedure that has proven useful for the concerning studies is shown in Fig. 4 (Pflug, 1984 a)17. Compact and unweathered rock samples are selected for the analyses. The rock sample is sectioned into two halves (top of Fig. 4). From one side of the main cut (lb) a normal ca. 30 pm thin section is produced. From the opposite surface of the cut (la), a thick section is prepared for the purpose of demineralization. The thin section (lb) is used for polarization microscopy and microprobe analyses. 

With the ongoing refinement of endovascular devices and techniques for carotid revascularization, catheter-based therapy has become technically feasible in most patients. Notwithstanding, appropriate case selection is required to ensure procedural safety, Here within we review new concepts pertaining to patient selection and technical procedural considerations that we consider crucial for enhancing clinical outcomes following carotid stenting,... 

So far we know the selection rules for spin-orbit coupling. Further, given a reduced matrix element (RME), we are able to calculate the matrix elements (MEs) of all multiplet components by means of the WET. What remains to be done is thus to compute RMEs. Technical procedures how this can be achieved for Cl wave functions are presented in the later section on Computational Aspects. Regarding symmetry, often a complication arises in this step Cl wave functions are usually determined only for a single spin component, mostly Ms = S. The Ms quantum numbers determine the component of the spin tensor operator for which the spin matrix element (S selection rules dictated by the spatial part of the ME. 

Classification components must be classified according to a system model comprising both the technical, procedural and human aspects, but with an emphasis on the last,... 

The Tribunal is not bound by technical rules of evidence, but shall adopt and apply to the greatest possible extent expeditious and non-technical procedure, and shall admit any evidence which it deems to have probative value. ... 

---