Surface vibration metallic surfaces

Figure Bl.6.10 Energy-loss spectrum of 3.5 eV electrons specularly reflected from benzene absorbed on the rheniiun(l 11) surface [H]. Excitation of C-H vibrational modes appears at 100, 140 and 372 meV. Only modes with a changing electric dipole perpendicular to the surface are allowed for excitation in specular reflection. The great intensity of the out-of-plane C-H bending mode at 100 meV confimis that the plane of the molecule is parallel to the metal surface. Transitions at 43, 68 and 176 meV are associated with Rli-C and C-C vibrations.

The polarization dependence of the photon absorbance in metal surface systems also brings about the so-called surface selection rule, which states that only vibrational modes with dynamic moments having components perpendicular to the surface plane can be detected by RAIRS [22, 23 and 24]. This rule may in some instances limit the usefidness of the reflection tecluiique for adsorbate identification because of the reduction in the number of modes visible in the IR spectra, but more often becomes an advantage thanks to the simplification of the data. Furthenuore, the relative intensities of different vibrational modes can be used to estimate the orientation of the surface moieties. This has been particularly useful in the study of self-... 

Our intention is to give a brief survey of advanced theoretical methods used to detennine the electronic and geometric stmcture of solids and surfaces. The electronic stmcture encompasses the energies and wavefunctions (and other properties derived from them) of the electronic states in solids, while the geometric stmcture refers to the equilibrium atomic positions. Quantities that can be derived from the electronic stmcture calculations include the electronic (electron energies, charge densities), vibrational (phonon spectra), stmctiiral (lattice constants, equilibrium stmctiires), mechanical (bulk moduli, elastic constants) and optical (absorption, transmission) properties of crystals. We will also report on teclmiques used to study solid surfaces, with particular examples drawn from chemisorption on transition metal surfaces. 

For films on non-metallic substrates (semiconductors, dielectrics) the situation is much more complex. In contrast with metallic surfaces both parallel and perpendicular vibrational components of the adsorbate can be detected. The sign and intensity of RAIRS-bands depend heavily on the angle of incidence, on the polarization of the radiation, and on the orientation of vibrational transition moments [4.267]. 

In recent years there is a growing interest in the study of vibrational properties of both clean and adsorbate covered surfaces of metals. For several years two complementary experimental methods have been used to measure the dispersion relations of surface phonons on different crystal faces. These are the scattering of thermal helium beams" and the high-resolution electron-energy-loss-spectroscopy. ... 

One of the m jor attractions in the metal-atom synthesis of dimer and cluster species is the ability to isolate highly unsaturated species, M Lm, that may then be considered to be models for chemisorption of the ligand, L, on either a bare, or a supported, metal surface (,100). It is quite informative to compare the spectral properties of these finite cluster-complexes to those of the corresponding, adsorbed surface-layers (100), in an effort to test localized-bonding aspects of chemisorption, and for deciphering UPS data and vibrational-energy-loss data for the chemisorbed state. At times, the similarities are quite striking. 

For insulating surfaces, the friction p can be only due to phonon emission into the substrate, but on metal surfaces damping to vibration may result from both phononic and electronic excitations so that p= %/+ pp. The damping coefficient is assumed to be in the form of a diagonal matrix. 

In diatomic molecules such as N2, O2, and CO the valence electrons are located on the 5cr, Ijt and 2jt orbitals, as shown by Fig. 6.6. [Note that the 5cr level is below the Ijt level due to interaction with the 4cr level, which was not included in the figure.] In general, the Ijt level is filled and sufficiently low in energy that the interaction with a metal surface is primarily though the 5cr and 2jt orbitals. Note that the former is bonding and the latter antibonding for the molecule. We discuss the adsorption of CO on d metals. CO is the favorite test molecule of surface scientists, as it is stable and shows a rich chemistry upon adsorption that is conveniently tracked by vibrational spectroscopy. 

Recent work in our laboratory has shown that Fourier Transform Infrared Reflection Absorption Spectroscopy (FT-IRRAS) can be used routinely to measure vibrational spectra of a monolayer on a low area metal surface. To achieve sensitivity and resolution, a pseudo-double beam, polarization modulation technique was integrated into the FT-IR experiment. We have shown applicability of FT-IRRAS to spectral measurements of surface adsorbates in the presence of a surrounding infrared absorbing gas or liquid as well as measurements in the UHV. We now show progress toward situ measurement of thermal and hydration induced conformational changes of adsorbate structure. The design of the cell and some preliminary measurements will be discussed. 

Rh(CO)2 [16]. Such a dicarbonyl should possess two vibration modes. However, only the symmetric mode is observable in the IR spectrum. The asymmetric mode is inaccessible to an IR experiment on a metal surface due to the so-called metal surface selection rule, which prohibits the observation of dipole excitation if the transition dipole moment is oriented parallel to the surface. It should be noted that the observed frequencies fit well to values observed for Rh(CO)2 on technical Rh/Al203 catalysts [35-40] ( 2100 cm ) and Rh(CO)2 on planar TiO2(110) surfaces [41] (2112 cm ). 

OOCC6H4—N=N—QH4COO) was found on metal surfaces. The coupled product also presents vibrations at around 550cm [58]. 

Persson BNJ, Ryberg R. 1981. Vibrational interaction between molecules adsorbed on a metal surface The dipole-dipole interaction. Phys Rev B 24 6954-6970. 

Tian ZQ, Ren B, Mao BW. 1997. Extending surface Raman spectroscopy to transition metal surfaces for practical applications. 1. Vibrational properties of thiocyanate and carbon monoxide adsorbed on electrochemically activated platinum surfaces. J Phys Chem B 101 1338-1346. 

---