Surface Self-Assembled Monolayers

8-tt Ulman, A., Formation and structure of self-assembled monolayers , Chem. Rev. 1996, 96, 1533-1554. 

There is a vast range of chemistry of functionalised thiols that act as sensitiser electrode coatings in sensing. To take just one example, a ferrocene derived thiol receptor containing amide functional groups 

---

Most studies of ORR catalysis by metalloporphyrins have been carried out using water-insoluble catalysts absorbed on a graphite electrode in contact with aqueous solution. In a limited number of cases, four other approaches have been used catalysts imbedded in an inert film (i.e., Nafion or lipid) on the electrode surface self-assembled monolayers of catalysts catalysts in aqueous or mixed organic/aqueous solutions in contact with an electrode and catalysis in mixed aqueous/organic medium using... 

Gold-Coated Surfaces Self-Assembled Monolayers of Thiols. 91... 

Whitesides, G. M., and Laibinis, P. E. Wet chemical approaches to the characterization of organic surfaces self-assembled monolayers, wetting, and the physical-organic chemistry of the solid-liquid interface. Langmuir, 6, 87 (1990). 

Delamarche, B. Michel, H.A. Biebuyck, and C. Gerber, Golden interfaces the surface self assembled monolayers, Adv. Mater. 8, 719 729 (1996). 

Organic Surfaces Self-Assembling Monolayers and Langmuir-Blodgett Films... 

Dendrimers, Fractals, Neurons, and Trees 769 Lyotropic Liquid Crystals From Soap Scum to Biological Membranes 774 Organic Surfaces Self-Assembling Monolayers and Langmuir-Blodgett Films 778 Free-Radical Living Polymerizations 787 Lycra/Spandex 790... 

Freunscht P, Van Duyne R P and Schneider S 1997 Surface-enhanced Raman spectroscopy of trans-stilbene adsorbed on platinum- or self-assembled monolayer-modified silver film over nanosphere surfaces Chem. Phys. Lett. 281 372-8... 

Figure Bl.22.3. RAIRS data in the C-H stretching region from two different self-assembled monolayers, namely, from a monolayer of dioctadecyldisulfide (ODS) on gold (bottom), and from a monolayer of octadecyltrichlorosilane (OTS) on silicon (top). Although the RAIRS surface selection rules for non-metallic substrates are more complex than those which apply to metals, they can still be used to detemiine adsorption geometries. The spectra shown here were, in fact, analysed to yield the tilt (a) and twist (p) angles of the molecular chains in each case with respect to the surface plane (the resulting values are also given in the figure) [40].

Self-assembled monolayers (SAMs) are molecular layers tliat fonn spontaneously upon adsorjDtion by immersing a substrate into a dilute solution of tire surface-active material in an organic solvent [115]. This is probably tire most comprehensive definition and includes compounds tliat adsorb spontaneously but are neither specifically bonded to tire substrate nor have intennolecular interactions which force tire molecules to organize tliemselves in tire sense tliat a defined orientation is adopted. Some polymers, for example, belong to tliis class. They might be attached to tire substrate via weak van der Waals interactions only. 

Deiamarche E, Michei B, Biebuyck FI A and Gerber C 1996 Golden interfaces the surface of self-assembled monolayers Adv. Mater. 8 719-29... 

Harder P, Grunze M, Dahint R, Whitesides G M and Laibinis P E 1998 Molecular conformation in oligo(ethylene glycol)-terminated self-assembled monolayers on gold and silver surfaces determines their ability to resist protein adsorption J. Rhys. Chem. B 102 426-36... 

A second class of monolayers based on van der Waal s interactions within the monolayer and chemisorption (in contrast with physisorption in the case of LB films) on a soHd substrate are self-assembled monolayers (SAMs). SAMs are well-ordered layers, one molecule thick, that form spontaneously by the reaction of molecules, typically substituted-alkyl chains, with the surface of soHd materials (193—195). A wide variety of SAM-based supramolecular stmctures have been generated and used as functional components of materials systems in a wide range of technological appHcations ranging from nanoHthography (196,197) to chemical sensing (198—201). 

Fig. 6. Self-assembled monolayers are formed by immersing a substrate into a solution of the surface-active material. Necessary conditions for the...

Surface properties are generally considered to be controlled by the outermost 0.5—1.0 nm at a polymer film (344). A logical solution, therefore, is to use self-assembled monolayers (SAMs) as model polymer surfaces. To understand fully the breadth of surface interactions, a portfoHo of chemical functionahties is needed. SAMs are especially suited for the studies of interfacial phenomena owing to the fine control of surface functional group concentration. 

Langmuir-Blodgett films (LB) and self assembled monolayers (SAM) deposited on metal surfaces have been studied by SERS spectroscopy in several investigations. For example, mono- and bilayers of phospholipids and cholesterol deposited on a rutile prism with a silver coating have been analyzed in contact with water. The study showed that in these models of biological membranes the second layer modified the fluidity of the first monolayer, and revealed the conformation of the polar head close to the silver [4.300]. 

As mentioned earlier, the contact-mechanics-based experimental studies of interfacial adhesion primarily include (1) direct measurements of surface and interfacial energies of polymers and self-assembled monolayers (2) quantitative studies on the role of interfacial coupling agents in the adhesion of elastomers (3) adhesion of microparticles on surfaces and (4) adhesion of viscoelastic polymer particles. In these studies, a variety of experimental tools have been employed by different researchers. Each one of these tools offers certain advantages over the others. These experimental studies are reviewed in Section 4. 

Section 4.1 briefly describes some of the commonly employed experimental tools and procedures. Chaudhury et al., Israelachvili et al. and Tirrell et al. employed contact mechanics based approach to estimate surface energies of different self-assembled monolayers and polymers. In these studies, the results of these measurements were compared to the results of contact angle measurements. These measurements are reviewed in Section 4.2. The JKR type measurements are discussed in Section 4.2.1, and the measurements done using the surface forces apparatus (SFA) are reviewed in Section 4.2.2. 

---