Sulphur Iodide

A number of bromides and iodides are known but there are no sulphur iodides. 

Iododurene has been prepared by treatment of durene either with iodine and mercuric oxide,4 or with sulphur iodide and nitric acid.5... 

Sulphammonium decomposes into ammonia and sulphur under ordinary pressures. With liquid ammonia in sealed tubes at temperatures between 0° C. and 20° C. it gives the compound (NH3)2S.2NH3, and at —23° C. it forms (NH3)2S.NHa. With iodine in solution in liquid ammonia, sulphammonium forms an ammoniacal compound of sulphur iodide. The blue colour of a solution of sulphammonium may possibly be due to the presence of colloidal sulphur.3... 

A convenient method for the preparation of telomers of pentafluoro-sulphur iodide, with the general formula SF5(C2F4)nI, has been described.69 The compounds were prepared by the reaction of disulphur decafluoride with equimolar amounts of 1,2-di-iodotetrafluoroethylene at 150 °C in an autoclave, with the simultaneous injection of tetrafluoroethylene ... 

Arsenates(V) are more powerful oxidising agents than phos-phates(V) and will oxidise sulphite to sulphate, hydrogen sulphide (slowly) to sulphur and, depending on the conditions, iodide to iodine. 

Liquid sulphur dioxide is a solvent for a number of substances, for example iodine, sulphur, some sulphites, potassium iodide and sulphur dichloride oxide, SOClj (see below). The liquid can be assumed to ionise slightly, thus ... 

In what way does a solution of hydrogen peroxide react with (a) chlorine water, (b) potassium permanganate solution, (c) potassium dichromate solution, (d) hydrogen sulphide 50 cm of an aqueous solution of hydrogen peroxide were treated with an excess of potassium iodide and dilute sulphuric acid the liberated iodine was titrated with 0.1 M sodium thiosulphate solution and 20.0 cm were required. Calculate the concentration of the hydrogen peroxide solution in g 1" ... 

Iodine is rarely prepared in the laboratory the method used is the oxidation of an iodide by manganese(IV) oxide and sulphuric acid, for example with sodium iodide ... 

This reaction is also used on a large scale, to obtain iodine from seaweed. The ash from burnt seaweed ( kelp ) is extracted with water, concentrated, and the salts other than iodides (sulphates and chlorides) crystallise out. The more soluble iodides remain and the liquor is mixed with sulphuric acid and manganese dioxide added the evolved iodine distils off and is condensed. 

Most iodine produced commercially comes from the sodium iodate(V) remaining after sodium nitrate has been crystallised from Chile saltpetre. The iodatefV) is first reduced to iodide by blowing sulphur dioxide into the solution (or by addition of sodium sulphite) ... 

The iodine is then liberated by heating the copper(I) iodide with sulphuric acid and iron(III) oxide ... 

The presence of chloric(I) acid makes the properties of chlorine water different from those of gaseous chlorine, just as aqueous sulphur dioxide is very different from the gas. Chloric(I) acid is a strong oxidising agent, and in acid solution will even oxidise sulphur to sulphuric acid however, the concentration of free chloric(I) acid in chlorine water is often low and oxidation reactions are not always complete. Nevertheless when chlorine bleaches moist litmus, it is the chloric(I) acid which is formed that produces the bleaching. The reaction of chlorine gas with aqueous bromide or iodide ions which causes displacement of bromine or iodine (see below) may also involve the reaction... 

An aqueous solution of hydrogen iodide, up to 50% strength, may be prepared by passing hydrogen sulphide (or sulphur dioxide) into a suspension of iodine in water ... 

Hence hydrogen iodide cannot be produced by the reaction of sulphuric acid with an iodide. Hydriodic acid is slowly oxidised by air (more rapidly in light) liberating iodine ... 

Addition of an oxidising agent to a solution of an iodide (for example concentrated sulphuric acid, hydrogen peroxide, potassium dichromate) yields iodine the iodine can be recognised by extracting the solution with carbon tetrachloride which gives a purple solution of iodine. 

The dichromate ion oxidises iron(II) to iron(III), sulphite to sulphate ion, iodide ion to iodine and arsenic(III) to arsenic(V) (arsenate). Reduction of dichromate by sulphite can be used to prepare chrome alum, since, if sulphur dioxide is passed into potassium dichromate acidified with sulphuric acid, potassium and chromium(III) ions formed are in the correct ratio to form the alum, which appears on crystallisation ... 

In water pollution studies, the oxygen content can be measured by making the water alkaline and shaking a measured volume with an oxygen-free solution containing Mn- (aq). The solution is acidified with sulphuric acid, potassium iodide added and the liberated iodine titrated with sodium thiosulphate. 

Nickel forms yellow anhydrous halides NiXjlX = F. Cl. Br) and a black iodide Nil2 all these halides are made by direct combination of the elements, and the chloride by reaction of sulphur dichloride oxide with the hydrated salt. All dissolve in water to give green solutions from which the hydrates can be crystallised the solutions contain the ion [NifHjOls], and the chloride crystallises as NiCl2.6H2O, nickel(II) chloride hexahydrate. 

Anhydrous cupric sulphate is white but forms a blue hydrate and a blue aqueous solution. The solution turns yellow when treated with concentrated hydrochloric acid, dark blue with ammonia, and gives a white precipitate and brown solution when treated with potassium iodide. A yellow-brown aqueous solution of ferric chloride becomes paler on acidification with sulphuric or nitric... 

To determine which halogen is present, take 1-2 ml. of the filtrate from the sodium fusion, and add dilute sulphuric acid until just acid to litmus. Add about 1 ml. of benzene and then about 1 ml. of chlorine water and shake. A yellowish-brown colour in the benzene indicates bromine, and a violet colour iodine. If neither colour appears, the halogen is chlorine. The result may be confirmed by testing the solubility of the silver halide (free from cyanide) in dilute ammonia solution silver chloride is readily soluble, whereas the bromide dissolves with difficulty, and the iodide not at all. 

Absolute diethyl ether. The chief impurities in commercial ether (sp. gr. 0- 720) are water, ethyl alcohol, and, in samples which have been exposed to the air and light for some time, ethyl peroxide. The presence of peroxides may be detected either by the liberation of iodine (brown colouration or blue colouration with starch solution) when a small sample is shaken with an equal volume of 2 per cent, potassium iodide solution and a few drops of dilute hydrochloric acid, or by carrying out the perchromio acid test of inorganic analysis with potassium dichromate solution acidified with dilute sulphuric acid. The peroxides may be removed by shaking with a concentrated solution of a ferrous salt, say, 6-10 g. of ferrous salt (s 10-20 ml. of the prepared concentrated solution) to 1 litre of ether. The concentrated solution of ferrous salt is prepared either from 60 g. of crystallised ferrous sulphate, 6 ml. of concentrated sulphuric acid and 110 ml. of water or from 100 g. of crystallised ferrous chloride, 42 ml. of concentrated hydiochloric acid and 85 ml. of water. Peroxides may also be removed by shaking with an aqueous solution of sodium sulphite (for the removal with stannous chloride, see Section VI,12). 

The experimental conditions necessary for the preparation of a solution of a diazonium salt, diazotisation of a primary amine, are as follows. The amine is dissolved in a suitable volume of water containing 2 5-3 equivalents of hydrochloric acid (or of sulphuric acid) by the application of heat if necessary, and the solution is cooled in ice when the amine hydrochloride (or sulphate) usually crystallises. The temperature is maintained at 0-5°, an aqueous solution of sodium nitrite is added portion-wise until, after allowing 3-4 minutes for reaction, the solution gives an immediate positive test for excess of nitrous acid with an external indicator—moist potassium iodide - starch paper f ... 

Add 101 g. (55 ml.) of concentrated sulphuric acid cautiously to 75 ml. of water contained in a 1 htre beaker, and introduce 35 g. of finely-powdered wi-nitroaniline (Section IV,44). Add 100-150 g. of finely-crushed ice and stir until the m-nitroaniUne has been converted into the sulphate and a homogeneous paste results. Cool to 0-5° by immersion of the beaker in a freezing mixture, stir mechanically, and add a cold solution of 18 g. of sodium nitrite in 40 ml. of water over a period of 10 minutes until a permanent colour is immediately given to potassium iodide - starch paper do not allow the temperature to rise above 5-7° during the diazotisation. Continue the stirring for 5-10 minutes and allow to stand for 5 minutes some m-nitrophenjddiazonium sulphate may separate. Decant the supernatant Uquid from the solid as far as possible. 

The Iodine may be recovered from the aqueous filtrate, containing sodium iodide, in the following manner. Add 33 ml. of concentrated sulphuric acid and a solution of 65 g. of sodium dichromate in 65 ml. of water. Allow the iodine to settle, wash it three times by decantation, filter, and allow to dry on a clock glass. The weight of crude iodine is about 50 g. 

---