Sulfonate group Sulfur

Finally, the sulfonate content of lignin is deterrnined by two main methods one typified by conductometric titration in which sulfonate groups are measured direcdy, and the other which measures the sulfur content and assumes that all of the sulfur is present as sulfonate groups. The method of choice for determining the sulfonate content of lignin samples that contain inorganic or nonsulfonate sulfur, however, is conductometric titration (45). 

The aromatic sulfone polymers are a group of high performance plastics, many of which have relatively closely related stmctures and similar properties (see Polymers containing sulfur, polysulfones). Chemically, all are polyethersulfones, ie, they have both aryl ether (ArOAr) and aryl sulfone (ArS02Ar) linkages in the polymer backbone. The simplest polyethersulfone (5) consists of aromatic rings linked alternately by ether and sulfone groups. 

A polysulfone is characterized by the presence of the sulfone group as part of its repeating unit. Polysulfones may be aUphatic or aromatic. AUphatic polysulfones (R and are alkyl groups) were synthesized by radical-induced copolymerization of olefins and sulfur dioxide and characterized many years ago. However, they never demonstrated significant practical utiUty due to their relatively unattractive physical properties, not withstanding the low cost of their raw materials (1,2). The polysulfones discussed in this article are those based on an aromatic backbone stmcture. The term polysulfones is used almost exclusively to denote aromatic polysulfones. 

An example of a sulfite ester made from thionyl chloride is the commercial iasecticide endosulfan [115-29-7]. A stepwise reaction of thionyl chloride with two different alcohols yields the commercial miticide, propaigite [2312-35-8] (189). Thionyl chloride also has appHcations as a co-reactant ia sulfonations and chlorosulfonations. A patent describes the use of thionyl chloride ia the preparation of a key iatermediate, bis(4-chlorophenyl) sulfone [80-07-9] which is used to make a commercial polysulfone engineering thermoplastic (see Polymers CONTAINING SULFUR, POLYSULFONe) (190). The sulfone group is derived from chlorosulfonic acid the thionyl chloride may be considered a co-reactant which removes water (see Sulfolanes and sulfones). 

Miscellaneous. In ore flotation, sodium sulfite functions as a selective depressant. In textile processing, sodium sulfite is used as a bleach for wood (qv) and polyamide fibers and as an antichlor after the use of chlorine bleach. Synthetic appHcations of sodium sulfite include production of sodium thiosulfite by addition of sulfur and the introduction of sulfonate groups into dyestuffs and other organic products. Sodium sulfite is useful as a scavenger for formaldehyde in aminoplast—wood compositions, and as a buffer in chrome tanning of leather. 

Sulfo-. sulfo-, thio-. (Preferably, sulfo- is used to designate the sulfonic group, and thio to denote that sulfur replaces oxygen.) -azetat,... 

As in the acyclic series, there is a lengthening of the sulfur-oxygen bond as the sulfur is oxidized from the sulfoxide to the sulfone in both the thiirane (i.e. 16a - 17a) and the thiirene (i.e. 18a - 19b) series. Unexpected, however, is the substantial decrease in the OSO angle of the sulfone group in thiirenes compared with that of the thiiranes (e.g. dimethyl sulfone. There appears to be no simple explanation for this trend. 

Finally, the reaction of 19b with potassium fluoride in the presence of a crown-ether phase-transfer agent118 to yield the sulfonyl fluoride 67 and diphenylacetylene119 belongs to the same category in which a nucleophile (F in this case) attacks the electrophilic sulfur of the sulfone group (equation 19). 

In order to introduce an S03 group into long-chain fatty acids, direct sulfonation with sulfur trioxide had been suggested in 1962 [29], similar to the Hell-Volhard-Zelinskii reaction of the a-bromation studied by Watson [34], Ten years previously de Boer had reviewed this mechanism among others for lower aliphatic sulfocarboxylic acids [35]. The sulfonation process was proposed as a two-step mechanism. The first step is the rapid addition of the S03 into... 

They stated that the observed selectivity may be charge-controlled, since the molecular orbital calculation of the triazorine and the sulfone 95 showed a strongly negative field around the lone pairs of the azo moiety of the triazorine and a strongly positive field around the sulfur of the sulfone group [29]. 

The nucleophilic attack of strong bases (e.g. hydroxide ion, alkoxide ions and carbanions) on either the -carbon or the sulfur atom of the sulfone group -of the thiirane dioxides is the initial key step that is responsible for the subsequent ring opening and further reaction. The formation of a three-membered a-sulfonyl carbanion is not observed in these cases (equation 11). 

The complexes of sulfur trioxide with various nucleophiles (dioxane, pyridine etc.) are mild sulfonating reagents. Unlike other complexes of sulfur trioxide, dimethyl sulfide-sulfur trioxide readily adds to conjugated multiple bonds. Consequently, not only the sulfo group but also the dimethyl sulfide group add at the multiple bond. The reactions of dimethyl sulfide-sulfur trioxide complex with butadiene, isoprene and 2,3-dimethylbutadiene take place as conjugated l,4- -additions of dimethyl sulfide and sulfonate groups at the double bonds of the diene (equation 103).124... 

In the case of PEMs, the situation is more complicated because the sulfonate counter-ions (in the case of a PEM such as Nafion ) are bound to the polymer chain and are thus relatively immobile, in contrast to the free counter-ion in a small molecule acid such as sulfuric or acetic acid. Tethering of the sulfonate group can be considered to be an impediment to the mobility of the proton as it traverses the membrane. Proton mobility is also affected by the effective mean-free path of connectivity of the conduction pathway as shown in Figure 3.2. In situation (a), the increased number of dead ends and tortuosity of the aqueous domains through which proton transport occurs over the situation in (b) leads to lower overall mobility. This has been demonstrated by Kreuer and will be discussed later in this section. 

Oxidation of the Sulfane-Sulfur of Thiosulfate and the Resynthesis of the Sulfonate Group of Thiosulfate from Sulfane-Sulfur by Thiobacilli... 

---