Substitutions tetrafluoroborate

These studies at the same time aroused my interest in the mechanistic aspects of the reaetions, including the complexes of RCOF and RF with BF3 (and eventually with other Lewis acid fluorides) as well as the complexes they formed with aromatics. 1 isolated for the first time at low temperatures arenium tetrafluoroborates (the elusive (T-complexes of aromatic substitutions), although I had no means to pursue their structural study. Thus my long fascination with the chemistry of car-bocationic complexes began. 

Several variations of this general procedure have been described. The functionalized dithiocarbamate (23) on heating with a mixture of phosphorus pentasulfide and tetrafluoroboric acid gave the 2-amino-substituted 1,3-dithiolylium tetrafluoroborate (24) in moderate to good yield (69CPB1924). 

O-Alkylation of A-unsubstituted /3-lactams to give the corresponding 2-alkoxy-l- etines can be achieved by reaction of the azetidin-2-ones with hard electrophiles (trialkyloxonium tetrafluoroborates) followed by treatment with base (cf. Section 5.09.4.3.1) (67JHC619, 69LA(725)124). In contrast, reaction of the A-unsubstituted azetidin-2-ones (73) or their derived anions with a variety of softer electrophiles results in A-substitution, and some representative reactions are illustrated in Scheme 7. 

Poly(phenylenepyrazoles), 5, 300 Polypyrazoles, 5, 300 N-substituted, 5, 300 Polypyrazolines, 5, 300 Poly(pyrazol-l-yl) borates as ligands, 5, 225, 235 Polypyrroles applications, 4, 376 Polypyrrole tetrafluoroborate conductors, 1, 355 Polysaccharides as pharmaceuticals, 1, 152 Poly-2,5-selenienylenes applications, 4, 971 Polysilacyclopentanes, 1, 609 Polysufides macrocyclic... 

Pentamethylcyclopentadienyl substituted boron complexes arc obtamed by the reaction of the pentamethylcyclopentadienyl anion with boron tnfluonde [109] (Table 27) Similarly, the Gngnard reagent prepared from 3,5-bis(tnfluorometh-yl)iodobenzene reacts with sodium tetrafluoroborate to form the phase-transfer eatalyst 2 under anhydrous eonditions [110] (equation 87)... 

Isolated carbonyls always give epoxides from the Corey-Chaykovsky reaction. Take the aldehyde substrate as an example. Spiro epoxide 30 was produced from the reaction of trisnorsqualene aldehyde 28 (R20 represents the polyene side-chain with 20 carbons) with substituted sulfur ylide 29, prepared in situ from cyclopropyldiphenylsulfonium tetrafluoroborate and KOH. " For the epoxidation of ketones, the Corey-Chaykovsky reaction works well for diaryl- (31), arylalkyl- (32), ... 

Cleavage of the chiral auxiliary is effected in a three-step procedure commencing with quatemization of the nitrogen with methyl fluorosulfonate, methyl trlfluoromethanesulfonate, or trimethyloxonium tetrafluoroborate. Reduction of the corresponding iminium salt 19 with NaBH4 and acidic hydrolysis of the resulting product affords substituted aldehyde 5 without epimerization of either stereocenter. 

Searching for donoracceptor-substituted anions as well as related cations derived from cyclopentadiene, the azafulvalene 32 was synthesized by condensation of the potassium salt of the pushpull-substituted cyclopentadiene with 3-methyl-2-methylsulfanyl-benzothiazolium tetrafluoroborate (85AG996) (Scheme 9). 

Complex 105 enters the pyrazoleAriphenylphosphine ligand substitution reaction with PPha to give 108 (910M3123). Further reaction with triphenylphosphine and silver tetrafluoroborate gives the heterodinuclear complex 109 (94IC2196). 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

H- and 3//-Azepines are generally unstable in aqueous acid solution and the few examples of simple azepinium salts, namely perchlorates,77 bromides,105 picrates35201 and a solitary iodide,105 have been prepared under nonaqueous conditions. The fractional crystallization of oxalate salts has been used for the separation of mixtures of 4- and 6-substituted 3f/-azepines,66 and 3,6-di-tm-butyl- and 2,5-di-tert-butyl-3//-azepine, on treatment with tetrafluoroboric acid in acetonitrile, are converted quantitatively into their crystalline tetrafluoroboratc salts.70... 

The C6 position of a V,./V-dialkyl-3//-azepin-2-amine, e.g. 1, displays remarkable reactivity towards electrophilic substitution, and with dimethyl(methylsulfanyl)sulfonium tetrafluorobor-ate undergoes methylsulfanylation and quaternization to yield 6-(methylsulfanyl)-3//-azepin-ium tetrafluoroborates, e.g. 2, identical to those obtained by quaternization of the free bases with trityl tetrafluoroborate.64 Basification of the salts with potassium carbonate yields the free bases, e.g. 3, which decompose during distillation or on exposure to air. 

With ten 7i-electrons delocalized over seven atoms, trithiadiazepine is electron rich and should undergo electrophilic substitution, which indeed it does. Nitronium tetrafluoroborate at — 10 C or copper(II) nitrate gives the mononitro derivative 5, which can be converted into the dinitro compound 6 by the action of an excess of nitronium tetrafluoroborate at 10 C.388... 

The most important results are given in Figure 4-1. The oxygen atom lies 244 pm from the N(l) atom of the diazonio group, well within the sum of the van der Waals radii. The diazonio group deviates by 10.4° from linearity. It seems that the 0(1) N(l) interaction is attractive, as indicated by the angle of 169.6° (instead of 180°) at N(l), but the 0(1) N(2) interaction is not. The NN distance (109.9 pm) is, however, not different from normal values found in diazonium ions. The same authors demonstrated later (Wallis et al., 1993) that this result is not unique for the quino-line-8-diazonium-l-oxide salt, as it was found also for two 1-naphthalenediazonium tetrafluoroborates substituted in the 8-position with the electron donors -SCH3 and -N(CH3)2 and - perhaps unexpectedly - for 8-nitronaphthalene-l-diazo-... 

Mechanistically there is ample evidence that the Balz-Schiemann reaction is heterolytic. This is shown by arylation trapping experiments. The added arene substrates are found to be arylated in isomer ratios which are typical for an electrophilic aromatic substitution by the aryl cation and not for a homolytic substitution by the aryl radical (Makarova et al., 1958). Swain and Rogers (1975) showed that the reaction takes place in the ion pair with the tetrafluoroborate, and not, as one might imagine, with a fluoride ion originating from the dissociation of the tetrafluoroborate into boron trifluoride and fluoride ions. This is demonstrated by the insensitivity of the ratio of products ArF/ArCl in methylene chloride solution at 25 °C to excess BF3 concentration. 

The only author to postulate a homolytic mechanism in the last few decades was Deng (1989). His arguments are based on the formation of small amounts of fluorinated bi- and polyphenyls in thermal fluoro-de-diazoniations and in mass-spec-trometric degradations of benzenediazonium tetrafluoroborate and its substituted derivatives. However, he does not include a critical discussion of his work. 

Cyano-de-diazoniations of the Sandmeyer type have been used for the synthesis of aromatic nitriles for many decades (example Clarke and Reed, 1964), as cyanide ions are comparable to bromide and iodide in many respects. A homolytic cyano-de-diazo-niation that does not use metal ions as reductant or ligand transfer reagent was described by Petrillo et al. (1987). They showed that substituted diazosulfides (XC6H4 — N2 — SC6H5), either isolated or generated in situ from arenediazonium tetrafluoroborates and sodium benzenethiolate, react with tetrabutylammonium cyanide in dimethylsulfoxide under photon stimulation, leading to nitriles (XC6H4CN). The method worked well with eleven benzenediazonium ions substituted in the 3- or 4-position, and was also used for the synthesis of phthalo-, isophthalo-, and tere-... 

With Pd(dba)2 in acetone/dichloromethane (1 1) and ethene (6-8 atm), styrene is formed from benzenediazonium tetrafluoroborate in 51% yield with seven substituted benzenediazonium salts the yields were 62-75%, but very small yields were obtained with the 2,4,6-trimethyl and the 2- and 4-nitro derivatives (Kikukawa et al., 1979). The two nitrodiazonium salts are good substrates in the Meerwein reaction... 

The Pd°-catalyzed arylations using arenediazonium tetrafluoroborates are limited to those diazonium salts that can be manipulated at room temperature. The reaction can, if necessary, be performed at temperatures up to 50 °C by using a mixture of an arylamine and tert-butyl nitrite in chloroacetic acid or in a mixture of chloroacetic and acetic acid (Kikukawa et al., 1981a). Styrene reacted with fourteen arylamines in the presence of 5 mol-% Pd(dba)2 to give the corresponding substituted stilbenes in yields of 46-97%. It is important for good yields to carry out these reactions in an acidic system. Without acid the yield was low (11%), and diazo tars were also formed. 

---