Styrene-butadiene rubber copolymer constants

In our experiments, it was felt that a better comparison of properties would be achieved if the test compounds belong to a particular series of copolymers. To that purpose, a series of styrene-butadiene copolymers, in which the styrene content varied from 0 to 30% were used. A compound of butadiene rubber with high cis content, and a compound of natural rubber were also included in the test programme. A specimen of natural rubber compound served as a reference specimen whether the condition of the countersurface is maintained constant or not may be checked. Figure 6 shows the results obtained at 20 C on a glass surface with the help of a constant speed tribometer. 

Acrylonitrile/Butadiene/Styrene (ABS) Acry-lonitrile/butadiene/styrene (ABS) polymers are not true terpolymers. As HIPS they are multipolymer composite materials, also called polyblends. Continuous ABS is made by the copolymerization of styrene and acrylonitrile (SAN) in the presence of dissolved PB rubber. It is common to make further physical blends of ABS with different amounts of SAN copolymers to tailor product properties. Similar to the bulk continuous HIPS process, in the ABS process, high di-PB (>50%, >85% 1,4-addition) is dissolved in styrene monomer, or in the process solvent, and fed continuously to a CSTR where streams of AN monomer, recycled S/AN blends from the evaporator and separation stages, peroxide or azo initiators, antioxidants and additives are continuously metered according to the required mass balance to keep the copolymer composition constant over time at steady state. 

Maleic anhydride grafting (cont.) poly(styrene-co-divinylbenzene), 694 poly(styrene-co-isobutylene), 675, 689 poly(styrene-co-nfialeic anhydride), 676, 679 poly(vinyl acetate), 676, 694 poly(vinyl acetate-co-vinyl fluoride), 678 poly(vinyl alkyl ethers), 675, 679, 692, 701 poly(vinyl chloride), 683, 692, 693, 695, 702 poly(vinylidene chloride), 691 poly(vinyl toluene-co-butadiene), 689 radical—initiated, 459-462, 464-466, 471, 475, 476 radiation—initiated, 459, 461, 466, 471, 474 redox-initiated, 476 rubber, 678, 686, 687, 691, 694 to saturated polymers, 459-466, 475, 476 solvents used 460-463, 465, 466, 469, 474-476 styrene block copolymers, 679 tall oil pitch, 678, 697 terpene polymers, 679, 700 thermally-initiated, 462, 464-467, 469, 476 to unsaturated polymers, 459, 466-474 vapor-phase techniques, 464, 474, 475 to wool fibers, 476 Maleic anhydride monomer acceptor for complex formation, 207-210 acetal copolymerization, 316 acetone CTC thermodynamic constants, 211 acetone photo-adduct pyrolysis, 195, 196 acetylacetone reaction, 235 acetylenic photochemical reactions, 193-196 acrylamide eutectic mixtures, 285 acylation of aromatic acids, 97 acylation of aromatics, 91, 92 acylation of fused aromatics, 92, 95, 97, 98 acylation of olefins, 99 acylation of phenols, 94-96 acylic diene Diels-Alder reactions, 104-111, 139 addition polymer condensations, 503-505 adduct with 2-cyclohexylimino-cyclopentanedi-thiocarboxylic acid, 51 adducts for epoxy resins curing, 507-510 adduct with 2-iminocyclopentanedithiocarboxylic acid, 51... 

---