Stereoselective reactions 1,3-dipolar cycloaddition

A model for the mechanism of the highly enantioselective AlMe-BINOL-cata-lyzed 1,3-dipolar cycloaddition reaction was proposed as illustrated in Scheme 6.13. In the first step nitrone la coordinates to the catalyst 11b to form intermediate 12. In intermediate 13, which is proposed to account for the absolute stereoselectivity of this reaction, it is apparent that one of the faces of the nitrone, the si face, is shielded by the ligand whereas the re face remains available... 

A rather unexpected discovery was made in connection to these investigations [49]. When the 1,3-dipolar cycloaddition reaction of la with 19b mediated by catalyst 20 (X=I) was performed in the absence of MS 4 A a remarkable reversal of enantioselectivity was observed as the opposite enantiomer of ench-21 was obtained (Table 6.1, entries 1 and 2). This had not been observed for enantioselective catalytic reactions before and the role of molecular sieves cannot simply be ascribed to the removal of water by the MS, since the application of MS 4 A that were presaturated with water, also induced the reversal of enantioselectivity (Table 6.1, entries 3 and 4). Recently, Desimoni et al. also found that in addition to the presence of MS in the MgX2-Ph-BOX-catalyzed 1,3-dipolar addition shown in Scheme 6.17, the counter-ion for the magnesium catalyst also strongly affect the absolute stereoselectivity of the reac-... 

The best known of metal carbene reactions, cydopropanation reactions, have been used since the earliest days of diazo chemistry for addition reactions to the carbon-carbon double bond. Electron-donating groups (EDG) on the carbon-carbon double bond facilitate this catalytic reaction [37], whereas electron-withdrawing groups (EWG) inhibit addition while facilitating noncatalytic dipolar cycloaddition of the diazo compound [39] (Scheme 5). There are several reviews that describe the earlier synthetic approaches [1, 2,4, 5,40-43], and these will not be duplicated here. Focus will be given in this review to control of stereoselectivity. 

Chapter 6 looks at concerted pericyclic reactions, including the Diels-Alder reaction, 1,3-dipolar cycloaddition, [3,3]- and [2,3]-sigmatropic rearrangements, and thermal elimination reactions. The carbon-carbon bond-forming reactions are emphasized and the stereoselectivity of the reactions is discussed in detail. 

Alkenylboronic esters undergo regio- and stereoselective 1,3-dipolar cycloadditions with nitrones. These reactions lead to boronic ester-substituted isoxazolidines, which can be converted by oxidation with H202 to the corresponding 4-hydroxy derivatives (Eq. 8.48).69 The high selectivity could be the result of a favorable interaction between the boronic ester and the amino group. 

Recently, Denmark and coworkers have developed a new strategy for the construction of complex molecules using tandem [4+2]/[3+2]cycloaddition of nitroalkenes.149 In the review by Denmark, the definition of tandem reaction is described and tandem cascade cycloadditions, tandem consecutive cycloadditions, and tandem sequential cycloadditions are also defined. The use of nitroalkenes as heterodienes leads to the development of a general, high-yielding, and stereoselective method for the synthesis of cyclic nitronates (see Section 5.2). These dipoles undergo 1,3-dipolar cycloadditions. However, synthetic applications of this process are rare in contrast to the functionally equivalent cycloadditions of nitrile oxides. This is due to the lack of general methods for the preparation of nitronates and their instability. Thus, as illustrated in Scheme 8.29, the potential for a tandem process is formulated in the combination of [4+2] cycloaddition of a donor dienophile with [3+2]cycload-... 

Dipolar cycloaddition reaction of benzo(A)thiophene-l,1-dioxide 282 with nonstabilized azomethine ylides gave high overall yield of new pyrrolo derivatives 5 and 6 with low stereoselectivity (Scheme 50) <2006TL5139>. 

The three-component reaction between isatin 432a, a-aminoacids 433 (proline and thioproline) and dipolarophiles in methanol/water medium was carried out by heating at 90 °C to afford the pyrrolidine-2-spiro-3 -(2-oxindoles) 51. The first step of the reaction is the formation of oxazlidinones 448. Loss of carbon dioxide from oxazolidinone proceeds via a stereospecific 1,3-cycloreversion to produce the formation of oxazolidinones almost exclusively with /razw-stereoselectivity. This /f-azomethine ylide undergo 1,3-dipolar cycloaddition with dipolarophiles to yield the pyrrohdinc-2-r/ V -3-(2-oxindolcs) 51. (Scheme 101) <2004EJ0413>. 

Pyrazolopyrazolopyrazines can be prepared from a stereoselective dipolar cycloaddition between the alkene group of 284 and diazomethane (Equation 45). Ten equivalents of diazomethane are used in this reaction when only 1 equiv is used, the corresponding methyl ester of the starting material was formed <20020L773>. 

Chiacchio and co-workers <97T13855> reported a stereoselective synthesis of 133 via an intramolecular 1,3-dipolar cycloaddition. Intermediate 132 was generated in situ by the reaction of tra .v-/V-(2-formylphenyl)-i -methyl-2-phcnylcthenc- l -sulfonamide 131 with N-methylhydroxylamine and afforded a tricyclic benzothiazine 133 in 51% yield (Scheme 36). 

An intramolecular nitrone 1,3-dipolar cycloaddition reaction to give 46 from 45 followed by reductive N-O bond cleavage afforded a stereoselective synthesis of the tetrahydro 177-1-benzazepines 47 the nitrone precursors 44 were prepared in turn by a Claisen rearrangement from an IV-allylamine <06SL2275>. 

Dipolar cycloaddition reactions are of main interest in nitrile oxide chemistry. Recently, reviews and chapters in monographs appeared, which are devoted to individual aspects of these reactions. First of all, problems of asymmetric reactions of nitrile oxides (130, 131), including particular aspects, such as asymmetric metal-catalyzed 1,3-dipolar cycloaddition reactions (132, 133), development of new asymmetric reactions utilizing tartaric acid esters as chiral auxiliaries (134), and stereoselective intramolecular 1,3-dipolar cycloadditions (135) should be mentioned. Other problems considered are polymer-supported 1,3-dipolar cycloaddition reactions, important, in particular, for combinatorial chemistry... 

Intermolecular Cycloaddition at the C=C Double Bond Addition at the C=C double bond is the main type of 1,3-cycloaddition reactions of nitrile oxides. The topic was treated in detail in Reference 157. Several reviews appeared, which are devoted to problems of regio- and stereoselectivity of cycloaddition reactions of nitrile oxides with alkenes. Two of them deal with both inter- and intramolecular reactions (158, 159). Important information on regio-and stereochemistry of intermolecular 1,3-dipolar cycloaddition of nitrile oxides to alkenes was summarized in Reference 160. 

The 1,3-dipolar cycloaddition reactions of nitrile oxides to unsymmetrically substituted norbomenes (243) and to dicyclopentadiene and its derivatives (244) proceed with complete stereoselectivity. The approach of the dipole takes place exclusively from the exo-face of the bicycloheptane moiety, generally... 

Heterocycles Both non-aromatic unsaturated heterocycles and heteroaromatic compounds are able to play the role of ethene dipolarophiles in reactions with nitrile oxides. 1,3-Dipolar cycloadditions of various unsaturated oxygen heterocycles are well documented. Thus, 2-furonitrile oxide and its 5-substituted derivatives give isoxazoline adducts, for example, 90, with 2,3- and 2,5-dihydro-furan, 2,3-dihydropyran, l,3-dioxep-5-ene, its 2-methyl- and 2-phenyl-substituted derivatives, 5,6-bis(methoxycarbonyl)-7-oxabicyclo[2.2.1]hept-2-ene, and 1,4-epoxy-l,4-dihydronaphthalene. Regio- and endo-exo stereoselectivities have also been determined (259). 

The stereoselective synthesis of the 12-acetoxy enone 428, related to the limonoid azadiradione, has been achieved in 12 steps (16% overall yield), starting from tricyclic diester 429. The key steps involve an intramolecular 1,3-dipolar cycloaddition of a nitrile oxide and a Stille coupling reaction of vinyl iodide with stannylfuran (469). 

The reaction of 1,3-dipolar cycloaddition of enantiopure cyclic nitrones to protected allyl alcohol, is the basis of stereoselective syntheses of bicyclic N, O-iso-homonucleoside analogs (747), of isoxazolidine, to analogs of C-nucleosides related to pseudouridine (748) and to homocarbocyclic-2 -oxo-3 -azanucleosides (749) (Fig. 2.36). 

The 1,3-dipolar cycloaddition of nitrones to vinyl ethers is accelerated by Ti(IV) species. The efficiency of the catalyst depends on its complexation capacity. The use of Ti( PrO)2Cl2 favors the formation of trans cycloadducts, presumably, via an endo bidentate complex, in which the metal atom is simultaneously coordinated to the vinyl ether and to the cyclic nitrone or to the Z-isomer of the acyclic nitrones (800a). Highly diastereo- and enantioselective 1,3-dipolar cycloaddition reactions of nitrones with alkenes, catalyzed by chiral polybi-naphtyl Lewis acids, have been developed. Isoxazolidines with up to 99% ee were obtained. The chiral polymer ligand influences the stereoselectivity to the same extent as its monomeric version, but has the advantage of easy recovery and reuse (800b). 

For reviews dealing with stereoselective 1,3-dipolar cycloaddition reactions, see (a) Martin JN, Jones RCF. In The Chemistry of Heterocyclic Compounds Synthetic Applications of 1,3-Dipolar Cycloaddition Chemistry Toward Heterocycles and Natural Products, Padwa A, Pearson WH (Eds.), John Wiley Sons, New-York, Vol. 59, ch. 1, 1-81, 2002 ... 

The general method, that has been widely used for the synthesis of perhydropyrrolo[1,2-6]isoxazoles, is based on a cycloaddition reaction of cyclic nitrones with dipolarophiles. The nitrone is easily available by oxidation of the corresponding hydroxylamine with mercuric chloride. The cycloaddition of nitrone to dipolarophiles is highly regioselective and stereoselective and have been often applied in the total synthesis of natural products <20010L1367, 2004BML3967, 2005JOC3157>. As one representative example of dipolar cycloaddition, reaction... 

The [3 + 2]-cycloaddition reactions of allenes with 1,3-dipoles are useful for the construction of a variety of five-membered heterocycles with a high degree of regio- and stereochemical control [67]. Generally, the dipolar cycloaddition reactions are concerted and synchronous processes with a relatively early transition state. The stereoselectivities and regiochemistries are accounted for by the FMO theory The reaction pathway is favored when maximal HOMO-LUMO overlap is achieved. 

Abstract 1,3-Dipolar cycloaddition reactions (DCR) are atom-economic processes that permit the construction of heterocycles. Their enantioselective versions allow for the creation of up to four adjacent chiral centers in a concerted fashion. In particular, well-defined half-sandwich iridium (111) catalysts have been applied to the DCR between enals or methacrylonitrile with nitrones. Excellent yield and stereoselectivities have been achieved. Support for mechanistic proposals stems from the isolation and characterization of the tme catalysts. 

---