Steel metal polishers

In the present work, steel surfaces polished, phosphated and painted are studied using AC Impedance technique In order to evaluate the protection efficiency of a commercial phosphatlng solution. The AC Impedance behavior of painted metal has been correlated with the Immersion time In the phosphatlng solution and with the desirability of a phospho-chromic rinse (18-23). A comparison of the Impedance behavior of two different types of commercial paints Is made for various durations of Immersion In sodium chloride solution at room temperature, and also for various temperatures at a given duration of Immersion. 

Gr. chroma, color) Discovered in 1797 by Vauquelin, who prepared the metal the next year, chromium is a steel-gray, lustrous, hard metal that takes a high polish. 

Cast molding is an increasingly used manufacturing process for both rigid gas-permeable and hydrogel contact lenses. In this process, two molds, made from a variety of plastics, are used. A female mold forms the lens front surface (convex) and a male mold forms the lens back surface (concave). The plastic molds are made from metal tools or dies that are usually stainless steel, precision lathed, and polished to the specified lens design. A variety of mold materials are used. The polymerized, hardened lens is released from the mated molds and is processed in much the same way as the spin-cast lenses described above. 

The materials of construction, from the cupboard to the fan, should be inorganic and resistant to attack by perchloric acid. For the cupboard itself suitable materials include stainless steel of types, 316 or 317, solid epoxy resin, and rigid PVC. Stainless steel has been popular for this application as it is easy to form, weld, and polish. It is, however, attacked by the acid, which causes discoloration of the metal surface and the formation of iron(III) perchlorate, which can be explosive. Ductwork, separate from other extract systems, is usually made from stainless steel or plastic materials. Fire regulations may preclude the use of plastic ductwork or require it to be sheathed in an outer casing of metal or GRP. The fan casing and impeller can both be made of plastic. 

Surface Coatings of metals that passivate readily Surface treatments to facilitate formation of passive film Cr coatings on Fe Polishing stainless steel and removing Fe impurities by HNO3 chromate treatment of A1... 

FSM Sosnowiec manufactures automobile lamps, door locks, and window winders for the Polish-manufactured Fiat cars. The lamp bodies are made of zinc-aluminum alloy and then copper-nickel-chromium plated. The door locks and window winders are made of steel and then zinc plated. The wastestreams contain cyanide and the heavy metals chromium (VI), copper, zinc, and nickel. The company carries out the traditional treatments of detoxification, neutralization, and dewatering.29... 

---