Solvents, acidic complex

The solid appears to be a mixture of the complexes CH,COOH.BF, and 2CH COOH.BF,. The latter appears to be a liquid and is alone soluble in ethylene dichloride the former is a solid. The solid moiioocetic acid complex is obtained by saturating an ethylene dichloride solution of acetic acid with boron trifluoride, filtering and washing the precipitate with the solvent it is hygroscopic and should be protected from moisture. It may be used as required 0-75 mol is employed with 0-26 mol of ketone and 0 6 mol of anhydride. 

Potcntiomctric Titrations In Chapter 9 we noted that one method for determining the equivalence point of an acid-base titration is to follow the change in pH with a pH electrode. The potentiometric determination of equivalence points is feasible for acid-base, complexation, redox, and precipitation titrations, as well as for titrations in aqueous and nonaqueous solvents. Acid-base, complexation, and precipitation potentiometric titrations are usually monitored with an ion-selective electrode that is selective for the analyte, although an electrode that is selective for the titrant or a reaction product also can be used. A redox electrode, such as a Pt wire, and a reference electrode are used for potentiometric redox titrations. More details about potentiometric titrations are found in Chapter 9. 

To date, a number of simulation studies have been performed on nucleic acids and proteins using both AMBER and CHARMM. A direct comparison of crystal simulations of bovine pancreatic trypsin inliibitor show that the two force fields behave similarly, although differences in solvent-protein interactions are evident [24]. Side-by-side tests have also been performed on a DNA duplex, showing both force fields to be in reasonable agreement with experiment although significant, and different, problems were evident in both cases [25]. It should be noted that as of the writing of this chapter revised versions of both the AMBER and CHARMM nucleic acid force fields had become available. Several simulations of membranes have been performed with the CHARMM force field for both saturated [26] and unsaturated [27] lipids. The availability of both protein and nucleic acid parameters in AMBER and CHARMM allows for protein-nucleic acid complexes to be studied with both force fields (see Chapter 20), whereas protein-lipid (see Chapter 21) and DNA-lipid simulations can also be performed with CHARMM. 

The formation of acyl halide-Lewis acid complexes have been observed by several methods. For example, both 1 1 and 1 2 complexes of acetyl chloride, with AICI3 can be observed by NMR spectroscopy. The existence of acylium ions has been demonstrated by X-ray diffraction studies on crystalline salts. For example, crystal structure determinations have been reported for /i-methylphenylacylium and acetylium ions as SbFg salts. There is also a good deal of evidence from NMR measurements which demonstrates that acylium ions can exist in nonnucleophilic solvents. " The positive charge on acylium ions is delocalized onto the oxygen atom. This delocalization is demonstrated in particular by the short O—C bond lengths in acylium ions, which imply a major contribution from the structure having a triple bond ... 

Depending on the specific reaction conditions, complex 4 as well as acylium ion 5 have been identified as intermediates with a sterically demanding substituent R, and in polar solvents the acylium ion species 5 is formed preferentially. The electrophilic agent 5 reacts with the aromatic substrate, e.g. benzene 1, to give an intermediate cr-complex—the cyclohexadienyl cation 6. By loss of a proton from intermediate 6 the aromatic system is restored, and an arylketone is formed that is coordinated with the carbonyl oxygen to the Lewis acid. Since a Lewis-acid molecule that is coordinated to a product molecule is no longer available to catalyze the acylation reaction, the catalyst has to be employed in equimolar quantity. The product-Lewis acid complex 7 has to be cleaved by a hydrolytic workup in order to isolate the pure aryl ketone 3. 

The Lewis acid complex 4 can cleave into an ion-pair that is held together by the solvent cage, and that consists of an acylium ion and a Lewis acid-bound phenolate. A fr-complex 6 is then formed, which further reacts via electrophilic aromatic substitution in the ortho- or para-position ... 

A solution of 3 g of the nitrile, water (5 moles per mole of nitrile), and 20 g of boron trifluoride-acetic acid complex is heated (mantle or oil bath) at 115-120° for 10 minutes. The solution is cooled in an ice bath with stirring and is carefully made alkaline by the slow addition of 6 A sodium hydroxide (about 100 ml). The mixture is then extracted three times with 100-ml portions of 1 1 ether-ethyl acetate, the extracts are dried over anhydrous sodium sulfate, and the solvent is evaporated on a rotary evaporator to yield the desired amide. The product may be recrystallized from water or aqueous methanol. Examples are given in Table 7.1. 

Polycrystalline and well-oriented specimens of pure amylose have been trapped both in the A- and B-forms of starch, and their diffraction patterns84-85 are suitable for detailed structure analysis. Further, amylose can be regenerated in the presence of solvents or complexed with such molecules as alcohols, fatty acids, and iodine the molecular structures and crystalline arrangements in these materials are classified under V-amylose. When amylose complexes with alkali or such salts as KBr, the resulting structures86 are surprisingly far from those of V-amyloses. 

The chemistry of Co(III) in dilute aqueous acidic solution is complicated by (/) oxidation of the solvent, it) complex formation with counter-ions, Hi) hydrolysis and iv) apparently extensive dimerisation. These phenomena are discussed further in the section on oxidation of water. 

Following earlier studies of the oxidation of formic and oxalic acids by pyridinium fluoro-, chloro-, and bromo-chromates, Banerji and co-workers have smdied the kinetics of oxidation of these acids by 2, 2Tbipyridinium chlorochromate (BPCC) to C02. The formation constant of the initially formed BPCC-formic acid complex shows little dependence on the solvent, whilst a more variable rate constant for its decomposition to products correlates well with the cation-solvating power. This indicates the formation of an electron-deficient carbon centre in the transition state, possibly due to hydride transfer in an anhydride intermediate HCOO—Cr(=0)(0H)(Cl)—O—bpyH. A cyclic intermediate complex, in which oxalic acid acts as a bidentate ligand, is proposed to account for the unfavourable entropy term observed in the oxidation of this acid. 

Fig. 4.22 Comparison of measured and calculated distribution ratios of americi-um(III)-terpyridine-decanoic acid complexes between 0.05 M HNOj and various organic solvent combinations. The calculated values are obtained with the Hansen partial solubility parameters. (From Ref. 45.)... 

All these methods have found applications in theoretical considerations of numerous problems more or less directly related to solvent extraction. The MM calculated structures and strain energies of cobalt(III) amino acid complexes have been related to the experimental distribution of isomers, their thermodynamic stability, and some kinetic data connected with transition state energies [15]. The influence of steric strain upon chelate stability, the preference of metal ions for ligands forming five- and six-membered chelate rings, the conformational isomerism of macrocyclic ligands, and the size-match selectivity were analyzed [16] as well as the relation between ligand structures, coordination stereochemistry, and the thermodynamic properties of TM complexes [17]. 

Sridharan and Mathai noticed that the transesterification of small esters under acid-catalyzed conditions was retarded by the presence of spectator polar compounds. " Thus, given that water can form water-rich clusters around protons (solvent-proton complexes) with less acid strength than methanol-only proton complexes, some catalyst deactivation may be expected with increased water concentrations. Also, water-rich methanol proton complexes should be less hydrophobic than methanol-only clusters, thus making it more difficult for the catalytic species (H" ) to approach the hydrophobic TG (and possibly DG) molecules and contributing to catalyst deactivation. Therefore, with water present in the feedstock or produced during the reaction in significant quantities, some catalyst deactivation can take place by hydration. 

---