Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Solvation and polarity

Solubility equilibrium, 24 Solubility parameter, 415 Solvation, 401 change in, 354 preferential, 403 selective, 403 Solvation and polarity, 399 Solvation energy, 403, 420 Solvation of anions, 360 Solvation shell, 403 Solvatochromic comparison method, 439... [Pg.247]

Thus, a dipolar aprotlc solvent such as dlmethylsulfoxide provides the necessary solvation and polarity to render lithium alkoxldes as effective initiators for ethylene oxide polymerization. Work is underway to further explore the scope and kinetics of this Important polymerization system. [Pg.40]

Complexes. In common with other dialkylamides, highly polar DMAC forms numerous crystalline solvates and complexes. The HCN—DMAC complex has been cited as an advantage ia usiag DMAC as a reaction medium for hydrocyanations. The complexes have vapor pressures lower than predicted and permit lower reaction pressures (19). [Pg.85]

The physical picture in concentrated electrolytes is more apdy described by the theory of ionic association (18,19). It was pointed out that as the solutions become more concentrated, the opportunity to form ion pairs held by electrostatic attraction increases (18). This tendency increases for ions with smaller ionic radius and in the lower dielectric constant solvents used for lithium batteries. A significant amount of ion-pairing and triple-ion formation exists in the high concentration electrolytes used in batteries. The ions are solvated, causing solvent molecules to be highly oriented and polarized. In concentrated solutions the ions are close together and the attraction between them increases ion-pairing of the electrolyte. Solvation can tie up a considerable amount of solvent and increase the viscosity of concentrated solutions. [Pg.509]

Solvent effects on chemical equilibria and reactions have been an important issue in physical organic chemistry. Several empirical relationships have been proposed to characterize systematically the various types of properties in protic and aprotic solvents. One of the simplest models is the continuum reaction field characterized by the dielectric constant, e, of the solvent, which is still widely used. Taft and coworkers [30] presented more sophisticated solvent parameters that can take solute-solvent hydrogen bonding and polarity into account. Although this parameter has been successfully applied to rationalize experimentally observed solvent effects, it seems still far from satisfactory to interpret solvent effects on the basis of microscopic infomation of the solute-solvent interaction and solvation free energy. [Pg.432]

Polarity. The increase in the polarity of the plasticizer (e.g. existence of polar groups, substitution of aryl groups by alkyl ones) reduces softening efficiency, worsens low-temperature properties of the plasticized polymers, improves solvation, and reduces extractability by aliphatic solvents. [Pg.627]

From the experimental results and theoretical approaches we learn that even the simplest interface investigated in electrochemistry is still a very complicated system. To describe the structure of this interface we have to tackle several difficulties. It is a many-component system. Between the components there are different kinds of interactions. Some of them have a long range while others are short ranged but very strong. In addition, if the solution side can be treated by using classical statistical mechanics the description of the metal side requires the use of quantum methods. The main feature of the experimental quantities, e.g., differential capacitance, is their nonlinear dependence on the polarization of the electrode. There are such sophisticated phenomena as ionic solvation and electrostriction invoked in the attempts of interpretation of this nonlinear behavior [2]. [Pg.801]

In general, ILs behave as moderately polar organic solvents with respect to organic solutes. Unlike the organic solvents to which they are commonly compared, however, they are poorly solvating and are rarely found as solvates in crystal structures. [Pg.75]

Since the term hydration refers to aqueous solutions only, the word solvation was introduced as a general term for the process of forming a solvate in solution. The terms solvation and heat of solvation were introduced at a time when little or nothing was known about polar molecules. We know now that, when an atomic ion is present in a solvent, the molecular dipoles are subject to the ionic field, whose intensity falls off in 1/r2. We cannot draw a sphere round the ion and say that molecules within this sphere react with the ion to form a solvated ion, while molecules outside do not. The only useful meaning that can now be attached to the term solvation is the total interaction between ion and solvent. As already mentioned, this is the sense in which the term is used in this book. [Pg.68]

The frequency-dependent spectroscopic capabilities of SPFM are ideally suited for studies of ion solvation and mobility on surfaces. This is because the characteristic time of processes involving ionic motion in liquids ranges from seconds (or more) to fractions of a millisecond. Ions at the surface of materials are natural nucleation sites for adsorbed water. Solvation increases ionic mobility, and this is reflected in their response to the electric field around the tip of the SPFM. The schematic drawing in Figure 29 illustrates the situation in which positive ions accumulate under a negatively biased tip. If the polarity is reversed, the positive ions will diffuse away while negative ions will accumulate under the tip. Mass transport of ions takes place over distances of a few tip radii or a few times the tip-surface distance. [Pg.277]

Recently, Eisenthal and coworkers have developed time-resolved surface second harmonic techniques to probe dynamics of polar solvation and isomerization reactions occurring at liquid liquid, liquid air, and liquid solid interfaces [22]. As these experiments afford subpicosecond time resolution, they are analogous to ultrafast pump probe measurements. Specifically, they excite a dye molecule residing at the interface and follow its dynamics via the resonance enhance second harmonic signal. [Pg.408]

Schuster, P., Jakubetz, W., and Marius, W. Molecular Models for the Solvation of Small Ions and Polar Molecules. 60, 1-107 (1975). [Pg.167]

Importantly, the presence of polar and non-polar domains in imidazolium ILs [77] affects their solvation and their ability to interact with different species. In fact, polar substrates are preferentially dissolved in polar domains and non-polar compounds in non-polar domains (Figure 1.4) [78,79]. As a consequence, the final size and shape of NPs can be tuned by the volume of these ILs domains. [Pg.12]


See other pages where Solvation and polarity is mentioned: [Pg.173]    [Pg.84]    [Pg.133]    [Pg.401]    [Pg.1139]    [Pg.264]    [Pg.136]    [Pg.380]    [Pg.401]    [Pg.264]    [Pg.52]    [Pg.173]    [Pg.84]    [Pg.133]    [Pg.401]    [Pg.1139]    [Pg.264]    [Pg.136]    [Pg.380]    [Pg.401]    [Pg.264]    [Pg.52]    [Pg.857]    [Pg.362]    [Pg.399]    [Pg.222]    [Pg.19]    [Pg.241]    [Pg.348]    [Pg.1248]    [Pg.203]    [Pg.175]    [Pg.221]    [Pg.21]    [Pg.176]    [Pg.450]    [Pg.363]    [Pg.112]    [Pg.151]    [Pg.18]    [Pg.18]    [Pg.224]    [Pg.210]    [Pg.245]    [Pg.156]    [Pg.187]    [Pg.81]    [Pg.189]   
See also in sourсe #XX -- [ Pg.399 ]




SEARCH



And solvation

Approaches to the Problem of Solvation Calculations in Polar and Charged Molecules

Numerical simulations of solvation in simple polar solvents Results and discussion

Polar solvation

Solvation of non-polar and apolar molecules - hydrophobic effects

The Solvated Electron in Alcohols and Other Polar Liquids

© 2024 chempedia.info