Sodium 1,2,4-triazole

Benzylation of sodium 1,2,4-triazole was not regjoselective and the step utilized NaH, which is not suitable for large scale preparation, for generating the sodium triazole species. 

Substituted phenacyl bromides (61) were condensed with vicinal diols (62), and the resulting bromoketals (63) were then coupled with sodium 1,2,4-triazole in dimethyl formamide solution. 

The synthesis of anastrozole (Scheme 3.3) began with an 8 2 displacement of commercially available 3,5-fc (bromomethyl)toluene (19) using potassium nitrile and a phase-transfer catalyst, tetrabutylammonium bromide (Edwards and Large, 1990). The resulting fcw-nitrile 20 in DMF was then deprotonated with sodium hydride in the presence of excess methyl iodide to give the fc -dimethylated product 21. Subsequently, a Wohl-Ziegler reaction on 21 was carried out using A-bromosuccinamide (NBS), and a catalytic amount of benzoyl peroxide (BPO) as the radical initiator. Finally, an Sn2 displacement of benzyl bromide 22 with sodium triazole in DMF afforded anastrozole (2) as a white solid. 

A mixture of 2,2-(5-methyl-l,3-phenylene)di(2-methylpropionitrile) (2.26 g), N-bromosuccinimide (1.78 g), benzoylperoxide (0.05 g) and carbon tetrachloride (50 ml) was refluxed for 2 hours, cooled and filtered, and the filtrate was evaporated to dryness under reduced pressure. The residue was dissolved in dimethylformamide (20 ml), sodium triazole (1.8 g) was added, and the mixture was stirred at room temperature for 18 h. Water (100 ml) was added, and the mixture was extracted twice with ethyl acetate, dried and evaporated to dryness and the residue was purified by flash column chromatography, eluting with ethyl acetate to give 2,2-[5-(lH-l,2,4-triazol-l-ylmethyl)-l,3-phenylene]di(2-methylpropionitrile), mp 81-82°C after crystallization from ethyl acetate/cyclohexane. 

Reaction with nucleophiles such as copper cyanide or sodium triazole gave 15 and 16 respectively. 

Phenylhydrazinecarboxamide M6 and sodium triazol-3-olate M7 were prepared according to the literature (Scheme 9.8) [18]. 

Nitric acid may be precipitated by nitron [2218-94-2] (4,5-dihydro-l,4-diphenyl-3,5-phenylimino-l,2,4-triazole). The yellow precipitate maybe seen at dilutions as low as 1 60,000 at 25°C or 1 80,000 at 0°C. To prevent nitrous acid from interfering with the test results, it may be removed by treating the solution with hydrazine sulfate, sodium azide, or sulfamic acid. 

Halogeno-l-methyl-l,2,3-triazoles undergo substitution reactions with amines, but the 4-halogeno analogs do not. 5-Chloro-l,4-diphenyl-l,2,3-triazole with sodium cyanide in DMSO gives the cyano derivative (63JCS2032). 1-Substituted 3-chloro- and 5-chloro-l,2,4-triazoles both react with amines. 

Amino-l,2,4-triazole has been prepared by evaporating formylguanidine nitrate with sodium carbonate, and from 5(3)-amino-1,2,4-triazole carboxjdic acid-3(S) by heating above its melting point, or by a long digestion with acetic acid. ... 

A mixture of 300 ml. of water, 150 ml. of concentrated nitric acid, and 0.2 g. of sodium nitrite (Note 2) is placed in a 2-1. threenecked flask equipped with a stirrer and a thermometer. The stirred mixture is warmed to 45°, and 2 g. of l,2,4-triazole-3(5)-thiol is added. When oxidation starts, as indicated by the evolution of brown fumes of nitrogen dioxide and a rise in temperature, a bath of cold water is placed under the reaction flask to provide cooling and an additional 99 g. (total, 101 g. 1 mole) of 1,2,4-triazole-3(5)-thiol is added in small portions over the course of 30-60 minutes. The rate of addition and the extent of cooling by the water bath are so regulated as to keep the temperature close to 45 7° all during the addition. The water bath is kept cold by the occasional addition of ice. 

Triazolopyrimidines and their derivatives are relatively stable toward alkaline and acid hydrolysis. However, the action of aqueous sodium hydroxide, ammonia, or hydrazine under pressure converts them to derivatives of 1,2,3-triazole. ... 

According to Hofman-Bang carbon sulfide selenide, CSSe, catalyzes the iodine-azide reaction but is at the same time decomposed with the formation of selenium. Experiments, in both this laboratory and that of Hofman-Bang have shown that carbon diselenide reacts with sodium azide (in aqueous or aqueous-alcoholic solution) with immediate precipitation of red selenium even at — 20° C. //a selena-triazole is formed in this reaction it must be extremely unstable. 

A nitro group in the 4-position markedly increases the instability of the isoxazole ring in alkaline medium. This effect is clearly demonstrated by 3,5-dime thy 1-4-nitroisoxazole. Whereas 3,5-dimethyl-isoxazole is not affected by alkali, its 4-nitro-derivative (134) is cleaved by 2% sodium hydroxide. The structure of the product was proved by its conversion into a triazole (135) with phenyl diazonium chloride, according to the original authors. ... 

Intramolecular dipolar azide-olefin cycloaddition of 723 took place upon heating in benzene to afford 724 (83JA3273). An alternative rearrangement process can take place upon photolysis of 724 to give 725. Mesylation of 4-(3-hydroxypropyl)-2,4,6-trimethyl-2,5-cyclohexadiene-l-one (78JA4618) and subsequent treatment with sodium azide in DMF afforded the respective azide 726 which underwent intramolecular cycloaddition to afford the triazoline 727 (83JOC2432). Irradiation of 727 gave the triazole derivative 728 (Scheme 126). 

Chloro-2-(3-methyl-4H-1,2,4-triazol-4-yDbenzophenone (Oxidation of 7solution prepared by adding sodium periodate (2 g) to a stirred suspension of ruthenium dioxide (200 mg) in water (35 ml). The mixture became dark. Additional sodium periodate 18 g) was added during the next 15 minutes. The ice-bath was removed and the mixture was stirred for 45 minutes. Additional sodium periodate (4 g) was added and the mixture was stirred at ambient temperature for 18 hours and filtered. The solid was washed with acetone and the combined filtrate was concentrated in vacuo. The residue was suspended in water and extracted with methylene chloride. The extract was dried over anhydrous potassium carbonate and concentrated. The residue was chromatographed on silica... 

Reduction of the 1//-1,2-benzodiazepines 6 with lithium aluminum hydride results in the dihydro compounds 8, which are dehydrogenated to the 3H-1,2-benzodiazepines 9 by 4-phenyl-4//-l,2,4-triazole-3,5-dione.123 The products readily revert to the 1//-tautomers in the presence of sodium methoxide. 3//-1,2-Benzodiazepines react with 3-chloroperoxybenzoic acid to give mixtures of 1- and 2-oxides, 10 and 11, in which the latter predominate. Treatment of the 2-oxides 11 with nucleophiles provides 3-substituted H- 1.2-benzodiazepines 12. Selected examples are given.124... 

Benzoate can be used as an anodic inhibitor and is effective at preventing waterline attack. Phosphate is also sometimes included. Sodium borate (borax) is usually added to the formulation to provide an alkalinity reserve buffer. Typically, a copper inhibitor such as benzo-triazole (BTA) or tolyltriazole (TTA) also forms part of a formulation and is used to provide yellow metal (copper and brasses) protection. 

A microwave-assisted three-component reaction has been used to prepare a series of 1,4-disubstituted-1,2,3-triazoles with complete control of regiose-lectivity by click chemistry , a fast and efficient approach to novel functionalized compounds using near perfect reactions [76]. In this user-friendly procedure for the copper(l) catalyzed 1,3-dipolar cycloaddition of azides and alkynes, irradiation of an alkyl halide, sodium azide, an alkyne and the Cu(l) catalyst, produced by the comproportionation of Cu(0) and Cu(ll), at 125 °C for 10-15 min, or at 75 °C for certain substrates, generated the organic azide in situ and gave the 1,4-disubstituted regioisomer 43 in 81-93% yield, with no contamination by the 1,5-regioisomer (Scheme 18). 

Dihydro-3-methoxy-4-methyl-5-oxo-A/-[[2-(tri-fluoromethoxy)phenyl]sulfonyl]-1H-1,2,4-triazole-1-carboxamide, sodium salt... 

The drug discovery route to rizatriptan (1) began with the preparation of 1-(4 -nitrobenzyl)-l,2,4-triazole 5 using 4-nitrobenzyl bromide (4) and 1,2,4-triazole. (Scheme 4.1). Benzylation of the sodium salt of 1,2,4-triazole prepared with NaH was not regioselective and afforded a 1.5 1 mixture of l-(4 -nitrobenzyl)-1,2,4-triazole (5) and its regioisomer, 4-(4 -nitrobenzyl)-l,2,4-triazole. The desired isomer 5 was isolated in 52% yield after silica gel chromatography. Hydrogenation... 

Another important click reaction is the cycloaddition of azides. The addition of sodium azide to nitriles to give l//-tetrazoles is shown to proceed readily in water with zinc salts as catalysts (Eq. 11.71).122 The scope of the reaction is quite broad a variety of aromatic nitriles, activated and nonactivated alkyl nitriles, substituted vinyl nitriles, thiocyanates, and cyanamides have all been shown to be viable substrates for this reaction. The reaction of an arylacetylene with an azide in hot water gave 1,4-disubstituted 1,2,3-triazoles in high yields,123 while a similar reaction between a terminal aliphatic alkyne and an azide (except 111 - nitroazidobenzcnc) afforded a mixture of regioisomers with... 

The light fastness of the vic-triazole 11.17 on nylon is 4-5 as on cotton this is significantly superior to that of the DAST derivatives. Unlike the DAST types, the vic-triazole is also stable towards a sodium chlorite bleach. Applied to nylon in combination with sodium chlorite, compound 11.17 can give exceptionally high whiteness and excellent fastness properties. 

Tetranitro derivative 90 (z-TACOT Section 12.10.15.5) treated with methanolic sodium methoxide at ambient temperature does not lead to simple product of nucleophilic substitution of a nitro group but provides compound 92. Its formation can be rationalized by introduction of the methoxy group into the 1-position, followed by scission of the remote triazole ring of 91 to give the final product. Compound 90 subjected to the vicarious nucleophilic substitution (VNS) conditions using either hydroxylamine or trimethylhydrazinium iodide gives a very insoluble red solid, which was identified as l,3,7,9-tetraamino-2,4,8,10-tetranitrobenzotriazolo[2,l- ]benzotriazole 93 (Scheme 5) <1998JOC3352>. 

Reaction of the spirocyclic imidazoline 316 with glyoxal and sodium hydrogen sulfite results in hydrolysis of the aminal and subsequent double condensation to give the tetrazolopyridopyrazine 317 (Equation 109) <1999JHC117>. The pyridopyridazinylhydrazine 318 can be cyclized to the fused triazole 319 by reaction with formic acid (Equation 110) <1998SC2871>. 

Pyranopyridines. The chlorobenzopyranoquinolone 325 reacts with hydrazides to give a triazole-fused ring system, such as in compound 326. Likewise, reaction with sodium azide gives the tetrazolo-fused product 327 (Scheme 79) <2003IJB2567>. 

A three-component coupling was used to prepare a series of 1,4-disubstituted-l,2,3-triazoles 129 from the corresponding acetylated Baylis-Hillman adducts 127, sodium azide and terminal alkynes 128 <06TL3059>. This same reaction was also carried out in either water or in... 

---