Sodium glycolate structure

Periodate lignin may be another type of lignin preparation representative of whole lignin in wood [46]. Wood meal suspending in water with a small amount of acetic acid is treated with sodium metaperiodate at room temperature, by which vic-glycol structures in carbohydrates are cleaved to give aldehydes. After the subsequent reduction of aldehydes to alcohols, carbohydrates are readily hydrolyzed even at room temperature in a mild acid condi-... 

Another method for the hydroxylation of the etliylenic linkage consists in treatment of the alkene with osmium tetroxide in an inert solvent (ether or dioxan) at room temperature for several days an osmic ester is formed which either precipitates from the reaction mixture or may be isolated by evaporation of the solvent. Hydrolysis of the osmic ester in a reducing medium (in the presence of alkaline formaldehyde or of aqueous-alcoholic sodium sulphite) gives the 1 2-glycol and osmium. The glycol has the cis structure it is probably derived from the cyclic osmic ester ... 

Stoddart and his coworkers have reported syntheses of the trans-syn-trans and the trans-anti-trans isomers of dicyclohexano-18-crown-6 The synthesis of these two compounds from trans-l,2-cyclohexanediol was accomplished in two stages. First, the diols were temporarily linked on one side by formation of the formal, and this was treated with diethylene glycol ditosylate and sodium hydride to form the hemi-crown formal. Removal of the formal protecting group, followed by a second cychzation completed the synthesis. The synthesis of the trans-anti-trans compound is illustrated below m Eq (3 12) and the structures of the five possible stereoisomers are shown as structures 1—5. 

The sodium or potassium salt of 6-azauracil in aqueous ethanol, anhydrous ethanol, or ethylene glycol reacted with methyl iodide practically exclusively to give the 3-methyl derivative (63). In toluene the sodium, potassium, and mercuric salts produced no methylated derivatives whereas the silver salt also yielded the 3-methyl derivative, Similarly, the 3-methyl derivative was prepared from the mercuric salt of 6-azathymine, and its structure was established by hydrolysis to pyruvic acid 4-methylthiosemicarbazone. ... 

The oxidation may be performed at pH 5.0 by addition of an aqueous solution of sodium metaperiodate. The reaction is allowed to proceed in the dark at 4 °C and after 24 hours the excess periodate is destroyed by the addition of ethylene glycol. The aims in periodate oxidation are to elucidate the number of neighbouring hydroxyl groups by estimating the number of moles of periodate consumed and to determine the structure of the moiety remaining after the reaction. The amount of periodate used in the reaction may be determined in several ways, including titrimetric and spectrophotometric methods. 

Rudnic, E.M., Kanig, J., and Rhodes, C.T., The effect of molecular structure on the function of sodium starch glycolate in wet granulated systems. Drug Dev. Ind Pharm., 9 303-320 (1983). 

We have recently evaluated the ATRP of a wide range of hydrophilic monomers such as 2-sulfatoethyl methacrylate (SEM), sodium 4-vinylbenzoate (NaVBA), sodium methacrylate (NaMAA), 2-(dimethylamino)ethyl methacrylate (DMA), 2-(iV-morpholino)ethyl methacrylate (MEMA), 2-(diethylamino)ethyl methacrylate (DEA), oligo(ethylene glycol) methacrylate (OEGMA), 2-hydroxyethyl methacrylate (HEMA), glycerol monomethacrylate (GMA), 2-methacryl-oyloxyethyl phosphorylcholine (MPC), and a carboxybetaine-based methacrylate [CBMA]. Their chemical structures and literature references (which contain appropriate experimental details) are summarised in Table 1. 

The peculiar layer structure of these clays gives them cation exchange and intercalation properties that can be very useful. Molecules, such as water, and polar organic molecules, such as glycol, can easily intercalate between the layers and cause the clay to swell. Water enters the interlayer region as integral numbers of complete layers. Calcium montmorillonite usually has two layers of water molecules but the sodium form can have one, two, or three water layers this causes the interlayer spacing to increase stepwise from about 960 pm in the dehydrated clay to 1250, 1550, and 1900 pm as each successive layer of water forms. 

In contrast, raspberry and core shell structures are formed when in both stages a non ionic surfactant, i.e., nonylphenol ethoxylated poly(ethylene glycol) and sodium persulfate are used. 

Only one paper that we are aware of explores a combined synthesis and processing route to aluminosilicates. Kemmitt and Milestone use precursors made by reaction of sodium hydroxide, boehmite [Al(0)OH] and silica in ethylene glycol in a 4 3 1 ratio160. The precursor structures are related to those shown above. On removal of solvent (ethylene glycol) a glycolate precursor is obtained that contains a pentacoordinated... 

---