Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Sensitivity evaluation

Davis, G.D. and Kolonko, L.L., Process control methodology — process sensitivity evaluation of the case to insulation bondline. In Proc. JANNAF Structure and Mechanical Behavior Subcommittee Meeting, Pub . 591. Chemical Propulsion Information Agency, Columbia, MD, 1992, p. 67. [Pg.1008]

Kinkead ER, Bunger, SK, Wolfe RE. 1992e. Irritation and sensitization evaluation of Fyrquel 220 hydraulic fluid. 212-213. [Pg.342]

Kinkead ER, Wolfe RE, Bunger SK. 1992d. Irritation and sensitization evaluation of Durad MP280 hydraulic fluid. Acute Toxicity Data 1 211. [Pg.343]

Figure 14. Sensitivity evaluation of a MZI nanodevice by using solutions of vatying... Figure 14. Sensitivity evaluation of a MZI nanodevice by using solutions of vatying...
Dunkle s Syllabus (1957-1958) Shock Tube Studies in Detonation (pp 123-25) Determination of Pressure Effect (144-45) Geometrical and Mechanical Influences (145-48) Statistical Effects of Sensitivity Discussion on Impact Sensitivity Evaluation (148-49) Pressure in the Detonation Head (175) Temperature of Detonation (176) Charge Density, Porosity, and Granulation (Factors Affecting the Detonation Process) (212-16) Heats of Explosion and Detonation (243-46) Pressures of Detonation (262-63) A brief description of Trauzl Block Test, Sand Test, Plate Dent Test, Fragmentation Test, Hess Test (Lead Block Crushing Test), Kast Test (Copper Cylinder Compression Test), Quinan. Test and Hop-kinson Pressure Bar Test (264-67) Detonation Calorimeters (277-78) Measurements... [Pg.315]

Consider briefly the relative character of sensitivity evaluation, namely, that it is possible only to speak of a higher or lower sensitivity of one explosive as compared with another. It would be meaningless, for example, to say that the sensitivity of some explosive is so many times higher than that of another explosive. No single sensitivity has this property in this sense it is analogous with such a property of explosives as, for example, detonation capacity. It is most convenient to compare explosives with respect to sensitivity, against those explosives about whose sensitivity fairly firm empirical ideas exist, eg the explosives of a reference series ... [Pg.312]

Fig. 10. Sensitivity evaluation of SPFS on planar surfaces. (1), (2), (3) are fluorescence kinetic curves of the binding of L2F5 to surfaces of different biotin densities of % — 0.0004, 0.0001, 0, respectively. (4), (5), (6) are fluorescence kinetic curves of the binding of AF-RaM to 2F5 (mouse IgG) bound surfaces of different X = 0.0004, 0.0001, 0, respectively. Fig. 10. Sensitivity evaluation of SPFS on planar surfaces. (1), (2), (3) are fluorescence kinetic curves of the binding of L2F5 to surfaces of different biotin densities of % — 0.0004, 0.0001, 0, respectively. (4), (5), (6) are fluorescence kinetic curves of the binding of AF-RaM to 2F5 (mouse IgG) bound surfaces of different X = 0.0004, 0.0001, 0, respectively.
Gupta BD, Sharma AK (2005) Sensitivity evaluation of a multilayered surface plasmon resonance-based fiber optical sensor a theoretical study. Sensors Actuators B Chem 107 40-46... [Pg.227]

A sensitive evaluation of the truth content of this view - it would not be a general view (Kipnis et al, 1996) - is less important than the historical fact that it should be flatly asserted in that setting. [Pg.2]

Temperature and heat sensitive evaluations (thermal properties)... [Pg.202]

Table 46.1. Clinical Sensitivity Evaluation of Home Pregnancy Tests (1) Name of Device Confidence in Positive Results (%)Clinical Sensitivity (%) ... Table 46.1. Clinical Sensitivity Evaluation of Home Pregnancy Tests (1) Name of Device Confidence in Positive Results (%)Clinical Sensitivity (%) ...
The Project sensitivity evaluation shows that the most significant factors affecting the Project parameters are the volume of energy sales, tariffs and construction cost. [Pg.63]

ENTRENA, L. GARCIA-VALDERAS, M. FERNANDEZ-CARDENAL, R. LINDOSO, A. LOPEZ-ONGIL, C. Soft error sensitivity evaluation of microprocessors by multilevel emulation-based fault injection. IEEE Transactions on Cmnputers, 2010, v. 61, n. 3, pp. 313-322. [Pg.103]

The overall evaluations of rupture probability may be performed in a rigorous, yet onerous, way by Monte Carlo methods, or, especially for sensitivity evaluations, by simplified methods. [Pg.123]

Any test result should be accompanied by a detailed evaluation of the reliability of the measurements (usually obtained by means of statistical analysis), evaluation of the signal to noise ratio and sensitivity evaluations, with... [Pg.40]

DSC provides a rapid and sensitive evaluation of isothermal crystallization behavior. The sample of interest is annealed at a sufficiently high temperature for a period long enough to remove the previous thermal history. The sample is then rapidly cooled to the crystallization temperature, and the time period of exothermic crystallization is measured. [Pg.77]

The approximate response statistics computed through Eqs. (3) and (4) are extremely important in evaluating the variability of the response quantities of interest due to the intrinsic uncertainty of the model parameters and provide information on the statistical correlation between the different response quantities. It is noteworthy that these approximate first- and second-order response statistics can be readily obtained when response sensitivities evaluated at the mean values of the random parameters are... [Pg.30]

Morris RE, Koo B, Guenther A, Yarwood G, McNally D, Tesche TW, Tonnesen G, Boylan J, Brewer P (2006) Model sensitivity evaluation for organic carbon using two multi-pollutant air quality models that simulate regional haze in the southeastern United States. Atmos Environ 40 4960-4972... [Pg.94]

This reaction was exploited by Tsukatani and Matsumoto (2000) in a stopped-flow FIA method. An immobilized D-malate dehydrogenase enzyme reactor was employed and the reduced enzymatic cofactor NADH that was formed was monitored fluorometrically (Xex = 340 nm = 460 nm). Due to the slow reaction rate, the flow was stopped with the sample in the reactor to increase reaction time. The intrinsic sample fluorescence was also assessed using a parallel blank reactor without immobilized enzyme. The method was validated through the analysis of red and white wine samples. The enzyme reactor stability was also evaluated and it was found that the sensitivity (evaluated as amplitude of response at a constant concentration of the analyte) gradually decreased to 60% within a week but then remained stable for a month. As D-malate cannot be present in naturally fermented wines (except for fraudulent addition), the interference of this primary substrate can be considered negligible. [Pg.293]

Susan Dingman, Risk Sensitivity Evaluations for the Intentional Depressurization Strategy, Letter Report to the NRC, Sandia National Laboratories, Albuquerque, NM, March 1991. [Pg.429]


See other pages where Sensitivity evaluation is mentioned: [Pg.940]    [Pg.98]    [Pg.200]    [Pg.121]    [Pg.404]    [Pg.425]    [Pg.21]    [Pg.210]    [Pg.473]    [Pg.148]    [Pg.45]    [Pg.123]    [Pg.364]    [Pg.447]    [Pg.237]    [Pg.513]    [Pg.515]   
See also in sourсe #XX -- [ Pg.671 ]




SEARCH



Cell culture models, evaluating sensitizing

Cell culture models, evaluating sensitizing potential

Environment-sensitive cracking evaluate

Evaluating Sensitivity and Linearity in Matrix

Pressure-sensitive adhesives evaluation

Sensitivity evaluation circuits

Sensitivity functions evaluation

© 2024 chempedia.info