Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Semi-reinforcing

Carbon blacks are usually used as fillers. The semi-reinforcing types, such as PEP (Past Extmsion Pumace) and SRE (Semi-Reinforcing Pumace) give the best performance (see Carbon, carbonblack). To lower the cost and improve the processibiUty of light compounds, or to lower the cost of black compounds, calcined clay or fine-particle calcium carbonate are used. [Pg.504]

N700(SRF) Semi Reinforcing Furnace N800(FT) Medium Thermal... [Pg.424]

SAF - Super abrasion furnace, ISAF - Intermediate super abrasion HAF - High abrasion furnace, FEF - Fast extmsion furnace SRF - Semi reinforcing furnace HS - High structure, LS - low structure, HM - High modulus ... [Pg.143]

Mica is available in a variety of grades and finds application as a semi-reinforcing filler and more often as a processing dry lubricant owing to its flake-like structure. It is also used as a dusting agent. [Pg.146]

N762 (Semi-Reinforcing Furnace) Carbon Black — 7... [Pg.102]

N762 (semi-reinforcing furnace) carbon black — 7... [Pg.106]

Most furnace black reactors are arranged horizontally. They can be up to 18 m long with an outer diameter of up to 2 m. Some vertical reactors are used especially for the manufacture of certain semi-reinforcing blacks (Figure 4.5) [4.12]. Further reactors are described in Ref. [4.13]. [Pg.172]

The proven compounding practice for the natural rubber layer is to load it with 30 phr of graphite, 30 phr of semi-reinforcing carbon black filler and 50 phr of inert filler, china clay. A low sulfur curing system is adopted for heat resistance with a suitable antioxidant to prevent flex-cracking. A typical chlorine resistant soft natural rubber compound formula is given in Table 3.2. [Pg.23]

Without carbon black With 50 phr (semi reinforcing furnace black (SRF)... [Pg.139]

Filler Semi Reinforcing Furnace Carbon Black ... [Pg.136]

Synonyms Aluminum-magnesium-sodium silicate Uses Semi-reinforcing filler for the mbber industry TlOj extender for paints food-pkg. adhesives, coatings... [Pg.1349]

Silica, fumed Wollastonite filler, semi reinforcing rubber Sodium magnesium aluminosilicate... [Pg.5245]

The subject of filler reinforcement on vulcanized rubber is very wide and complex. Fillers can be classified as reinforcing, semi-reinforcing and non-reinforcing. All fillers increase the hardness, modulus and stiffness of vulcanized rubber whether or not they are reinforcing or non-reinforcing. It has been established for a very long time that the term reinforcement has been widely used by the rubber technologist to denote the enhancement in the tensile... [Pg.98]

Semi-reinforcing carbon black SRF N762 Oil furnace 110 27 Medium reinforcement, high elongation and resilience, low compression set, used in mechanical goods, footwear, inner tubes and floor mats. [Pg.215]

See other pages where Semi-reinforcing is mentioned: [Pg.785]    [Pg.779]    [Pg.144]    [Pg.147]    [Pg.148]    [Pg.105]    [Pg.23]    [Pg.66]    [Pg.361]    [Pg.198]    [Pg.604]    [Pg.210]    [Pg.170]    [Pg.172]    [Pg.67]    [Pg.67]    [Pg.414]    [Pg.24]    [Pg.66]    [Pg.138]    [Pg.105]    [Pg.272]    [Pg.1197]    [Pg.140]    [Pg.388]    [Pg.754]    [Pg.4062]    [Pg.243]    [Pg.560]    [Pg.384]    [Pg.316]    [Pg.491]    [Pg.492]    [Pg.553]    [Pg.575]   
See also in sourсe #XX -- [ Pg.173 , Pg.241 , Pg.242 ]



SEARCH



Neat and reinforced semi-aromatic polyamides examples of properties

Rubber fillers, semi-reinforcing

Semi-reinforcing black

Semi-reinforcing carbon blacks

Semi-reinforcing fillers

© 2024 chempedia.info