Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Selenium nitride

The value reported in [82WAG/EVA] is 708 kJ-moT, and is obviously based on the early [1884BER/VIE] study. [Pg.186]


Security type attache cases incorporating lithium batteries and/or pyrotechnic material Selenium nitride Silver acetylide (dry)... [Pg.476]

In spite of the hazardous nature of Sc4N4, this binary selenium nitride has been used for the synthesis of other Se-N compounds, all of which have sulfur analogues (Scheme 5.2). " However, safer alternatives to the use of Sc4N4, e.g., selenium-nitrogen halides and silicon-nitrogen-selenium reagents, are available for the development of Se-N chemistry. ... [Pg.88]

Selenium Nitride (Nitrogen Selenide). Se4N4, mw 371.87, N 15,07%, yel-brick red hygr amorph powd, mp (expl 160—200°), bp (decompn). SI sol in hot w (decompn) v si sol in acet, acet ac, bz CS2. Methods of prepn include passing dry ammonia into a dil soln of selenyl chloride in bz, or into a cooled soln of selenium chloride in CS2 (Refs 1-5 7-10)... [Pg.284]

Nitrogen Selenide. (Selenium Nitride). See under List of Nitride Compounds in this Vol... [Pg.316]

Kennett, F. A. et al., J. Chem. Soc., Dalton Trans., 1982, 851-857 In attempted preparation of poly(selenium nitride), the black solid formed by interaction with selenium tetrabromide in acetonitrile exploded violently within 1 min at 0°C. The solid produced from diselenium tetrachloride in acetonitrile exploded at around 100°C, and in dichloromethane the product exploded in contact with a nickel spatula. [Pg.464]

See Caesium azide Sulfur dioxide, also Poly (selenium nitride)... [Pg.1784]

Raman spectroscopy is a useful probe for detecting transannular S - S interactions in bicyclic or cage S-N molecules or ions. The strongly Raman active vibrations occur at frequencies in the range 180-300 cm-1, and for S- -S distances in the range 2.4-2.7 A. On the basis of symmetry considerations, the Raman spectrum of the mixed sulfur-selenium nitride S2Se2N4 was assigned to the 1,5- rather than the 1,3- isomer.37... [Pg.227]

Poly(selenium nitride), 4730 Poly(sulfur nitride), 4728 Potassium nitride, 4671... [Pg.267]

Phenyllithium, 2259 Phenylsodium, 2287 Phosphoryl dichloride isocyanate, 0327 Phthalic anhydride, 2899 2-Piperidone, 1934 Platinum diarsenide, 0107 Poly(butadiyne), 1386 Poly(carbon monofluoride), 0337 Poly(ethylene terephthalate), 3262 Poly(selenium nitride), 4730... [Pg.336]

Selenium does not combine directly with nitrogen, but a compound of the two elements, selenium nitride, Se4N4, has been obtained by the... [Pg.311]

If the oxychloride is applied in dilute benzene solution some nitrogen selenide or selenium nitride is also formed.3 With liquid ammonia in the presence of ether in open vessels, the primary product is the compound SeOCl2.4NH3, which is decomposed by water into selenium, selenium nitride, ammonium chloride, ammonium selenite and selenious acid in a sealed tube, selenium nitride is formed in comparatively good yield.4... [Pg.323]

Selenium Nitride, Se4N4.—This was first obtained in 1859 by saturating selenium tetrachloride with ammonia in the cold 3... [Pg.340]

After investigating the action of liquid ammonia on a variety of selenium compounds, Streeker and Claus 5 have come to the conclusion that the tetrahalides are the best initial materials for the preparation of selenium nitride. The action of liquid ammonia on selenium tetra-bromide in the presence of carbon disulphide gives a good yield of the nitride. [Pg.340]

Selenium nitride is insoluble in water, alcohol and ether, slightly... [Pg.340]

Selenium and Nitrogen Selenium Nitride—Nitrosylselonie Arid. [Pg.437]

For sulphur nitride, see nitrogen sulphide for selenium, nitride, see nitrogen selenide and for tellurium nitride, see nitrogen telluride. J. von Liebig 26 obtained a brown powder by igniting chromium chloride in ammonia, and he thought the product was elemental chromium. A. Schrotter showed that the product is chromium nitride, Cr2N2 or CrN. [Pg.126]

Selenium nitride, SeN, is formed by the reaction of selenium or selenium chlorides Se2Cl2 or SeCLi with active nitrogen prodnced by a high freqnency discharge. To date, only the electron band spectra have been investigated. [Pg.4308]

On the basis of vibrational and Se NMR spectra, the hybrid sulfur/selenium nitride SeS3N2 has a cyclic structure in which the selenium atom is linked to two sulfur atoms (62). " ... [Pg.4661]


See other pages where Selenium nitride is mentioned: [Pg.877]    [Pg.51]    [Pg.47]    [Pg.1785]    [Pg.336]    [Pg.248]    [Pg.341]    [Pg.877]    [Pg.276]    [Pg.1867]    [Pg.2127]    [Pg.1785]    [Pg.4308]    [Pg.696]    [Pg.701]   
See also in sourсe #XX -- [ Pg.4 , Pg.4 , Pg.783 ]

See also in sourсe #XX -- [ Pg.8 , Pg.101 ]

See also in sourсe #XX -- [ Pg.126 ]

See also in sourсe #XX -- [ Pg.4 , Pg.4 , Pg.783 ]

See also in sourсe #XX -- [ Pg.4 , Pg.4 , Pg.586 ]




SEARCH



Selenium nitride halide

Selenium tetrachloride nitride

© 2024 chempedia.info