Scanning Kelvin probe force microscope

It is also possible to combine AFM with SKP to achieve the capability to map Volta potentials with submicron resolution [90, 120, 121]. The Scanning Kelvin Probe Force Microscope (SKPFM) operates by scanning the topography across a line and then, during a rescan of that line at a fixed distance from the surface. 

While the previously described techniques both require extrapolation of measured data in order to calculate the contact resistance, Kelvin probe force microscopy (KFM, also known as scanning surface potential microscopy or scanning potenti-ometry) can be used to determine the source and drain contributions to the contact resistance directly. In KFM, a conductive atomic force microscope (AFM) tip is scanned over the operational OFET channel twice. On the first pass, the topography... 

A modified version of the AC scanning force microscope with a Kelvin probe... 

Other than for electrodes immersed in bulk electrolyte, on electrodes covered by ultrathin layers the electrode potential may differ significantly across the electrode surface. Hence, localised measurements are of interest, being performed by scanning the tip across the sample. This was first applied for organic coated metals where the coating was electrochemically delaminating, driven by corrosion [12-14, 29], Even on the submicron scale the Kelvin probe technique can be applied for such studies, and then based on a modified atomic force microscope, see [34, 35]. Recent developments are the combination of Kelvin probe and SECM [36] and the use of Kelvin probe for hydrogen detection [37]. 

---