Sampling unit, dynamics

The volatiles of fresh pineapple (Ananas comosus [L] Merr.) crown, pulp and intact fmit were studied by capillary gas chromatography and capillary gas chromatography-mass spectrometry. The fnjit was sampled using dynamic headspace sampling and vacuum steam distillation-extraction. Analyses showed that the crown contains Cg aldehydes and alcohols while the pulp and intact fruit are characterized by a diverse assortment of esters, h rocarbons, alcohols and carbonyl compounds. Odor unit values, calculated from odor threshold and concentration data, indicate that the following compounds are important contributors to fresh pineapple aroma 2,5-dimethyl-4-hydroxy-3(2H)-furanone, methyl 2-methybutanoate, ethyl 2-methylbutanoate, ethyl acetate, ethyl hexanoate, ethyl butanoate, ethyl 2-methylpropanoate, methyl hexanoate and methyl butanoate. 

Quadrupoles are low-resolution MS instruments frequently used for molecular weight determination. QMS provides unit-mass resolution, sufficient dynamic range, good quantitation capabilities, and easy sample introduction without severe vacuum restrictions. The limited mass range (up to 4000 Da) generally does not pose problems in polymer/additive analysis. Some limitations of QMS in polymer research are ... 

For non-interacting, incompressible polymer systems the dynamic structure factors of Eq. (3) may be significantly simplified. The sums, which in Eq. (3) have to be carried out over all atoms or in the small Q limit over all monomers and solvent molecules in the sample, may be restricted to only one average chain yielding so-called form factors. With the exception of semi-dilute solutions in the following, we will always use this restriction. Thus, S(Q, t) and Sinc(Q, t) will be understood as dynamic structure factors of single chains. Under these circumstances the normalized, so-called macroscopic coherent cross section (scattering per unit volume) follows as... 

In the solid, dynamics occurring within the kHz frequency scale can be examined by line-shape analysis of 2H or 13C (or 15N) NMR spectra by respective quadrupolar and CSA interactions, isotropic peaks16,59-62 or dipolar couplings based on dipolar chemical shift correlation experiments.63-65 In the former, tyrosine or phenylalanine dynamics of Leu-enkephalin are examined at frequencies of 103-104 Hz by 2H NMR of deuterated samples and at 1.3 x 102 Hz by 13C CPMAS, respectively.60-62 In the latter, dipolar interactions between the 1H-1H and 1H-13C (or 3H-15N) pairs are determined by a 2D-MAS SLF technique such as wide-line separation (WISE)63 and dipolar chemical shift separation (DIP-SHIFT)64,65 or Lee-Goldburg CP (LGCP) NMR,66 respectively. In the WISE experiment, the XH wide-line spectrum of the blend polymers consists of a rather featureless superposition of components with different dipolar widths which can be separated in the second frequency dimension and related to structural units according to their 13C chemical shifts.63... 

The chemically realistic simulations we are discussing have been performed using a united atom representation of PB, which leads to the question How does one actually measure a CH vector reorientation for such a model The answer to this question is to use the trick we discussed in the analysis of the pressure dependence of the melt structure factor of PB. Hydrogen atoms are placed on the backbone carbons at their mechanical equilibrium positions for each structure that has been sampled along the MD trajectory. The CH vector dynamics we are showing in Figure 16 is solely from the backbone reorientations of the chain. 

The titration process has been automated so that batches of samples can be titrated non-manually and the data processed and reported via printouts and screens. One such instrument is the Metrohm 670 titroprocessor. This incorporates a built-in control unit and sample changer so that up to nine samples can be automatically titrated. The 670 titroprocessor offers incremental titrations with variable or constant-volume steps (dynamic or monotonic titration). The measured value transfer in these titrations is either drift controlled (equilibrium titration) or effected after a fixed waiting time pK determinations and fixed end points (e.g. for specified standard procedures) are naturally included. End-point titrations can also be carried out. 

With a modern variable-wavelength or PDA detector, it is safe to use a maximum absorbance of up to 1.0-1.5 absorbance units (AU). A typical UV detector today should have a baseline noise in the order of 10 micro absorbance units (10 AU). Therefore, modern UV detectors should have a dynamic range of 4-5 orders of magnitude. The sample concentration and injection volume can be adjusted to make it possible to quantify the major component and impurities at the 0.05% level in the same chromatographic run without changing detection wavelength, sample concentration, or injection volume. 

---