Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Safety validation

According to lEC 61508 and lEC 61511 the safety validation should be performed in terms of the overall safety functions requirements and the overall safety integrity requirements, taking into account the safety requirements allocation for the E/E/PE safety-related system in designing. In particular PFDavg value has to be verified in the probabilistic modeling process for the architectures considered of the E/E/PE safety-related systems taking into accoimt the probabihstic interval criterion for selected SIL. [Pg.102]

Appropriate documentation of the SRECS safety validation testing shall be produced, which shall state for each SRCF ... [Pg.260]

The version of the safety validation plan being used and the version of SRECS tested. [Pg.260]

The SRCF under test or analysis, with specific references to the requirements specified during the SRECS safety validation planning. [Pg.260]

In the example company that developed this lean design process, its use commences when an assumption is made that a project is of such magnitude that it will require following the steps outlined in its Request for Capital Expenditure Procedure. For purchases below the capital expenditure request level, the basics in the process are applied, but not as extensively. For example, if the machine shop supervisor submits a request to purchase a metal cutting saw, safety considerations would be established and they would have to be reviewed by environmental, health, and safety professionals as well as more than one level of management. Those safety requirements would be included in the purchase order. After receipt and installation of the equipment, a safety validation would be made. [Pg.259]

Factory acceptance testing, installation and commissioning and safety validation of safety instrumented systems Clauses 13,14, and IS... [Pg.15]

Application software safety validation planning To develop a plan for validating the application software 12.3.2 SIS application software safety requirements specification SIS application software safety validation plan Verification information... [Pg.73]

The application software shall be reviewed to ensure conformance to the specified design, the design principles, and the requirements of safety validation planning. [Pg.82]

When discrepancies occur between expected and actual SAT results, the analysis made and decision whether to continue the vaiidation or to issue a change request and return to an earlier part of the development life cycle is available as part of the results of the safety validation - 15.2.7... [Pg.80]

General requirements Development of overall safety requirements concepts, scope definitions (7.1—75) (clause numbers—Typ.) allocation of safety related requirements to E/E/PEs (7.6) specification of safety requirements (7.10) installation commissioning, safety validation, operation and maintenance, modification and retrofit, decommissioning or disposal of E/E/PEs (7.13 and 7.14). Operation, maintenance modification (7.15—7.17) Yes Yes Yes ... [Pg.425]

Software safety validation To ensure that integrated system complies with the intended SIL 7.7.2... [Pg.439]

Clause 15 SIS safety validation Validation through inspection and testing of installed and commissioned SIS, and associated SIF achieved the safety requirements specified. [Pg.452]


See other pages where Safety validation is mentioned: [Pg.252]    [Pg.273]    [Pg.51]    [Pg.55]    [Pg.67]    [Pg.89]    [Pg.16]    [Pg.145]    [Pg.247]    [Pg.247]    [Pg.18]    [Pg.47]    [Pg.71]    [Pg.74]    [Pg.74]    [Pg.77]    [Pg.88]    [Pg.57]    [Pg.75]    [Pg.78]    [Pg.78]    [Pg.251]    [Pg.573]    [Pg.279]    [Pg.279]    [Pg.431]    [Pg.431]    [Pg.432]    [Pg.435]    [Pg.440]    [Pg.440]    [Pg.454]   
See also in sourсe #XX -- [ Pg.218 , Pg.236 , Pg.238 , Pg.242 ]




SEARCH



© 2024 chempedia.info