Ruthenium polymerization

Originality Although ruthenium polymerization catalysts containing Schiff bases are... 

In an earlier investigation by the author [1] an additional acyclic diene metathesis ruthenium polymerization catalyst, (I), was identified and used in the metathesis of alkenyl alcohols. 

Hara M, Lean JT, Mallouk TE (2001) Photocatalytic oxidation of water by silica-supported tris(4,4 -dialkyl-2,2 -bipyridyl)ruthenium polymeric sensitizers and colloidal iridium oxide. Chem Mater 13 4668-4675... 

The first example of homogeneous transition metal catalysis in an ionic liquid was the platinum-catalyzed hydroformylation of ethene in tetraethylammonium trichlorostannate (mp. 78 °C), described by Parshall in 1972 (Scheme 5.2-1, a)) [1]. In 1987, Knifton reported the ruthenium- and cobalt-catalyzed hydroformylation of internal and terminal alkenes in molten [Bu4P]Br, a salt that falls under the now accepted definition for an ionic liquid (see Scheme 5.2-1, b)) [2]. The first applications of room-temperature ionic liquids in homogeneous transition metal catalysis were described in 1990 by Chauvin et al. and by Wilkes et ak. Wilkes et al. used weekly acidic chloroaluminate melts and studied ethylene polymerization in them with Ziegler-Natta catalysts (Scheme 5.2-1, c)) [3]. Chauvin s group dissolved nickel catalysts in weakly acidic chloroaluminate melts and investigated the resulting ionic catalyst solutions for the dimerization of propene (Scheme 5.2-1, d)) [4]. 

Acyclic diene molecules are capable of undergoing intramolecular and intermolec-ular reactions in the presence of certain transition metal catalysts molybdenum alkylidene and ruthenium carbene complexes, for example [50, 51]. The intramolecular reaction, called ring-closing olefin metathesis (RCM), affords cyclic compounds, while the intermolecular reaction, called acyclic diene metathesis (ADMET) polymerization, provides oligomers and polymers. Alteration of the dilution of the reaction mixture can to some extent control the intrinsic competition between RCM and ADMET. 

X(A1C13) = 0.5) to immobilize a ruthenium carbene complex for biphasic ADMET polymerization of an acyclic diene ester (Figure 7.4-2). The reaction is an equilibrium processes, and so removal of ethylene drives the equilibrium towards the products. The reaction proceeds readily at ambient temperatures, producing mostly polymeric materials but also 10 % dimeric material. 

In contrast to the situation with copper-based catalysis, most studies on ruthenium-based catalysts have made use of preformed metal complexes. The first reports of ruthenium-mediated polymerization by Sawamoto and coworkers appeared in I995.26 In the early work, the square pyramidal ruthenium (II) halide 146 was used in combination with a cocatalyst (usually aluminum isopropoxide). 

Bent ansa-metallocenes of early transition metals (especially Ti, Zr, Hf) have attracted considerable interest due to their catalytic activity in the polymerization of a-olefins. Ruthenium-catalyzed olefin metathesis has been used to connect two Cp substituents coordinated to the same metal [120c, 121a] by RCM or to connect two bent metallocenes by cross metathesis [121b]. A remarkable influence of the catalyst on E/Z selectivity was described for the latter case while first-generation catalyst 9 yields a 1 1 mixture of E- and Z-dimer 127, -127 is the only product formed with 56d (Eq. 19). 

Transition-metal-based Lewis acids such as molybdenum and tungsten nitro-syl complexes have been found to be active catalysts [49]. The ruthenium-based catalyst 50 (Figure 3.6) is very effective for cycloadditions with aldehyde- and ketone-bearing dienophiles but is ineffective for a,)S-unsaturated esters [50]. It can be handled without special precautions since it is stable in air, does not require dry solvents and does not cause polymerization of the substrates. Nitromethane was the most convenient organic solvent the reaction can also be carried out in water. 

Vinyl substituted bipyridine complexes of ruthenium 9 and osmium 10 can be electropolymerized directly onto electrode surfaces The polymerization is initiated and controlled by stepping or cycling the electrode potential between positive and negative values and it is more successful when the number of vinyl groups in the complexes is increased, as in 77 A series of new vinyl substituted terpyridinyl ligands have recently been synthesized whose iron, cobalt and ruthenium complexes 72 are also susceptible to electropolymerization... 

Sumi K, Kumobayashi H (2004) Rhodium/Ruthenium Applications. 6 63-96 Suzuki N (2005) Stereospecific Olefin Polymerization Catalyzed by Metallocene Complexes. 8 177-215... 

For SCVP of styrenic inimers, the mechanism includes cationic (14 [18], 19 [29]), atom transfer radical (15 [22, 27]), nitroxide-mediated radical (16 [21]), anionic (20 [19]), photo-initiated radical (17 [2], 18 [52-55]), and ruthenium-catalyzed coordinative (21 [56]) polymerization systems. Another example in-... 

Polymeric polyolefins, such as polybutadiene, secondary amines, and synthesis gas, are reacted in the presence of a catalyst system comprising a ruthenium-containing compound, a rhodium-containing compound, a steri-cally hindered phosphine, and a solvent [1191]. Preferred polybutadiene feedstocks are those with a predominance of main chain, rather than pendant olefin groups and in particular, those polymers containing both the 1,2-polybutadiene and 1,4-polybutadiene units. These polymers of high amine content are useful as down-hole corrosion inhibitors. 

In addition to the reactions discussed above, there are still other alkyne reactions carried out in aqueous media. Examples include the Pseudomonas cepacia lipase-catalyzed hydrolysis of propargylic acetate in an acetone-water solvent system,137 the ruthenium-catalyzed cycloisomerization-oxidation of propargyl alcohols in DMF-water,138 an intramolecular allylindination of terminal alkyne in THF-water,139 and alkyne polymerization catalyzed by late-transition metals.140... 

We report here studies on a polymer fi1m which is formed by the thermal polymerization of a monomeric complex tris(5,5 -bis[(3-acrylvl-l-propoxy)carbonyll-2,2 -bipyridine)ruthenium(11) as its tosylate salt,I (4). Polymer films formed from I (poly-I) are insoluble in all solvents tested and possess extremely good chemical and electrochemical stability. Depending on the formal oxidation state of the ruthenium sites in poly-I the material can either act as a redox conductor or as an electronic (ohmic) conductor having a specific conductivity which is semiconductorlike in magnitude. 

Nitration of the surface of polypyrrole and the subsequent reduction of the nitrate groups has been reported [244] and Bidan et al. [306, 307] have investigated the electrochemistry of a number of polymers based on pyrroles with /V-substituents which are themselves electrochemically active. Polypyrrole has also been successfully deposited onto polymeric films of ruthenium complexes [387], and has been used as an electrode for the deposition and stripping of mercury [388], As with most conducting polymers, several papers have also appeared on the use of polypyrrole in battery systems (e.g. [327, 389] and Ref. therein). 

Novel catalytic systems, initially used for atom transfer radical additions in organic chemistry, have been employed in polymer science and referred to as atom transfer radical polymerization, ATRP [62-65]. Among the different systems developed, two have been widely used. The first involves the use of ruthenium catalysts [e.g. RuCl2(PPh3)2] in the presence of CC14 as the initiator and aluminum alkoxides as the activators. The second employs the catalytic system CuX/bpy (X = halogen) in the presence of alkyl halides as the initiators. Bpy is a 4,4/-dialkyl-substituted bipyridine, which acts as the catalyst s ligand. 

A carbazole-functionalized norbornene derivative, 5-CN-carbazoyl methy-lene)-2-norbornene, CbzNB, was polymerized via ROMP using the ruthenium catalyst Cl2Ru(CHPh)[P(C6Hii)3]2 [100]. The polymerization was conducted in CH2C12 at room temperature, to afford products with polydispersity indices close to 1.3. Subsequent addition of 5-[(trimethylsiloxy)methylene]-2-norbornene showed a clear shift of the SEC trace of the initial polymer, indicating that a diblock copolymer was efficiently prepared in high yield. 

Synthesis of block copolymers of norbornene derivatives, with different side groups, has been reported via ROMP [101]. Initially, exo-N-bulyl-7-oxabicyclo[2.2.1]hept-5-ene-2,3-dicarboximide was polymerized in acetone at room temperature with a ruthenium initiator (Scheme 40). The conversion of the reaction was quantitative. Subsequent addition of norbornene derivative carrying a ruthenium complex led to the formation of block copolymers in 85% yield. Due to the presence of ruthenium SEC experiments could not be performed. Therefore, it was not possible to determine the molecular weight... 

By contrast, much of the work performed using ruthenium-based catalysts has employed well-defined complexes. These have mostly been studied in the ATRP of MMA, and include complexes (158)-(165).400-405 Recent studies with (158) have shown the importance of amine additives which afford faster, more controlled polymerization.406 A fast polymerization has also been reported with a dimethylaminoindenyl analog of (161).407 The Grubbs-type metathesis initiator (165) polymerizes MMA without the need for an organic initiator, and may therefore be used to prepare block copolymers of MMA and 1,5-cyclooctadiene.405 Hydrogenation of this product yields PE-b-PMMA. N-heterocyclic carbene analogs of (164) have also been used to catalyze the free radical polymerization of both MMA and styrene.408... 

Several nickel(II) complexes (e.g., (173)-(176)) have successfully been used to catalyze ATRP, especially when coupled with bromo-initiators, although activities are usually lower than with copper, ruthenium or iron systems.416-419 The alkylphosphine complex (175) is thermally more stable than (174) and has been used to polymerize a variety of acrylate monomers between 60 °C and 120 °C.418 Complex (176) is an unusual example of a well-defined zerovalent ATRP catalyst it displays similar activities to the Ni11 complexes, although molecular weight distributions (1.2-1.4) are higher.419 Pd(PPh3)4 has also been investigated and was reported to be less controlled than (176).420... 

Most ruthenium-initiated ROMP studies have been performed using (233) and strained cyclo-olefinic monomers such as norbornene688 and cyclobutenes,689 although several reports on the polymerization of 8-membered rings have also appeared.690-692 A wide range of functionalities are tolerated, including ethers, esters, amines, amides, alcohols, carboxylic acids, and ketones. 

---