Rigidized. absorption

Within this "rigid rotor" model, the absorption speetrum of a rigid diatomie moleeule should display a series of peaks, eaeh of whieh eorresponds to a speeifie J ==> J + 1 transition. The energies at whieh these peaks oeeur should grow linearally with J. An example of sueh a progression of rotational lines is shown in the figure below. 

Noryl is a rigid dimensionally stable material. Dimensional stabiUty results from a combination of low mold shrinkage, low coefficient of thermal expansion (5.9 x 10 per° C), good creep resistance (0.6—0.8% in 300 h at 13.8 MPa (2000 psi)), and the lowest water absorption rate of any of the engineering thermoplastics (0.07% in 24 h at room temperature). Noryl resins are completely stable to hydrolysis. They are not affected by aqueous acids or bases and have good resistance to some organic solvents, but they are attacked by aromatic or chlorinated aUphatic compounds. 

Photochromism Based on Triplet Formation. Upon absorption of light, many polycycHc aromatic hydrocarbons and their heterocycHc analogues undergo transitions to their triplet state which has an absorption spectmm different from that of the ground state (24). In rigid glasses and some plastics, the triplet state, which may absorb in the visible, has a lifetime of up to 20 seconds. 

Plasticizers. Plasticizers are materials that soften and flexibilize inherently rigid, and even britde polymers. Organic esters are widely used as plasticizers in polymers (97,98). These esters include the benzoats, phthalates, terephthalates, and trimeUitates, and aUphatic dibasic acid esters. Eor example, triethylene glycol bis(2-ethylbutyrate) [95-08-9] is a plasticizer for poly(vinyl butyral) [63148-65-2] which is used in laminated safety glass (see Vinyl POLYMERS, poly(vinyl acetals)). Di(2-ethyUiexyl)phthalate [117-81-7] (DOP) is a preeminent plasticizer. Variation of acid and/or alcohol component(s) modifies the efficacy of the resultant ester as a plasticizer. In phthalate plasticizers, molecular sizes of the alcohol moiety can be varied from methyl to tridecyl to control permanence, compatibiUty, and efficiency branched (eg, 2-ethylhexyl, isodecyl) for rapid absorption and fusion linear (C6—Cll) for low temperature flexibiUty and low volatility and aromatic (benzyl) for solvating. Terephthalates are recognized for their migration resistance, and trimeUitates for their low volatility in plasticizer appHcations. 

Absorption pricing is rigid and arbitrary and may result in business being turned away if the fixed sales price Cs cannot be obtained even though the business may give a usefiil contribution to fixed costs. 

Because of such desirable characteristics as low cost, good mouldability, excellent colour range, transparency, rigidity and low water absorption, polystyrene became rapidly developed. For many purposes, however, it was considered to be unacceptably brittle and this led to the development of the rubber-modified high-impact polystyrene (HIPS) and to the complex ABS, AMBS and... 

As mentioned earlier, unmodified polystyrene first found application where rigidity and low cost were important prerequisites. Other useful properties were the transparency and high refractive index, freedom from taste, odour and toxicity, good electrical insulation characteristics, low water absorption and comparatively easy processability. Carefully designed and well-made articles from polystyrene were often found to be perfectly suitable for the end-use intended. On the other hand the extensive use of the polymers in badly designed and badly made products which broke only too easily caused a reaction away from the homopolymer. This resulted, first of all, in the development of the high-impact polystyrene and today this is more important than the unmodified polymer (60% of Western European market). 

Compared with aliphatic nylons it also shows greater rigidity and hardness, lower water absorption, low temperature coefficient of expansion, good resistance to heat and moisture, better electrical insulation properties, particularly under hot and damp condition, and of course transparency. 

PPO forms one of a group of rigid, heat-resistant, more-or-less selfextinguishing polymers with a good electrical and chemical resistance, low water absorption and very good dimensional stability. This has led to a number of applications in television such as tuner strips, microwave insulation components and transformer housings. The excellent hydrolytic stability has also led to applications in water distribution and water treatment applications such as in pumps, water meters, sprinkler systems and hot water tanks. It is also used in valves of drink vending machines. 

Other uses include impregnation of wood to improve dimensional stability and reduce water absorption, sealing of porous metal castings by impregnation, and coil impregnation, to give a rigid structure both heat and water resistant. 

There is a frequent dememd for materials suitable for housings for computer, domestic, electrical and automotive equipment. In these applications toughness, excellent surface finish, surface durability, reasonable rigidity, dimensional stability, good weathering behaviour and low water absorption are common requirements. In these applications ABS is frequently considered first but its limited deflection temperature and heat aging resistance may lead to other... 

Aminos. There are two basic types of amino plastics - urea formaldehyde and melamine formaldehyde. They are hard, rigid materials with good abrasion resistance and their mechanical characteristics are sufficiently good for continuous use at moderate temperatures (up to 100°C). Urea formaldehyde is relatively inexpensive but moisture absorption can result in poor dimensional stability. It is generally used for bottle caps, electrical switches, plugs, utensil handles and trays. Melamine formaldehyde has lower water absorption and improved temperature and chemical resistance. It is typically used for tableware, laminated worktops and electrical fittings. 

Two types of the homopolymer are available, the flexible and the rigid. Both types have excellent chemical and abrasion resistance. The flexible types are produced with high porosity to permit plasticizer absorption. Articles made from the rigid type are hard and cannot be stretched more than 40% of their original length. An important property of PVC is that it is self-extinguishing due to presence of the chlorine atom. 

Parker [55] studied the IN properties of MEH-PPV sandwiched between various low-and high work-function materials. He proposed a model for such photodiodes, where the charge carriers are transported in a rigid band model. Electrons and holes can tunnel into or leave the polymer when the applied field tilts the polymer bands so that the tunnel barriers can be overcome. It must be noted that a rigid band model is only appropriate for very low intrinsic carrier concentrations in MEH-PPV. Capacitance-voltage measurements for these devices indicated an upper limit for the dark carrier concentration of 1014 cm"3. Further measurements of the built in fields of MEH-PPV sandwiched between metal electrodes are in agreement with the results found by Parker. Electro absorption measurements [56, 57] showed that various metals did not introduce interface states in the single-particle gap of the polymer that pins the Schottky contact. Of course this does not imply that the metal and the polymer do not interact [58, 59] but these interactions do not pin the Schottky barrier. 

Fig. la-c. Theoretical 2H NMR line shapes for axially symmetric FGT (r = 0) in rigid solids, cf. Equ. (1). a Line shapes for the two NMR transitions b 2H spectrum (Pake diagram) in absorption mode as obtained by Fourier transform methods c 2H spectrum in derivative mode as obtained by wide line methods... 

---